CPC1706

CPC1706
Single-Pole, Normally Open
4-Pin OptoMOS® DC Power SIP Relay
INTEGRATED CIRCUITS DIVISION
Parameter
Blocking Voltage
Load Current
On-Resistance (max)
Rating
60
4
0.09
Description
Units
VP
ADC

IXYS Integrated Circuits Division and IXYS have
combined to bring OptoMOS® technology, reliability,
and compact size to a new family of high power solid
state relays. The CPC1706, a DC-switching, normally
open (1-Form-A) Solid State Relay, is part of that
family.
Features
•
•
•
•
•
•
Handle Load Currents Up to 4ADC
2500Vrms Input/Output Isolation
Power SIP Package
High Reliability
No Moving Parts
Low Drive Power Requirements (TTL/CMOS
Compatible)
• Arc-Free With No Snubbing Circuits
• No EMI/RFI Generation
• Machine Insertable, Wave Solderable
Employing optically coupled MOSFET technology,
the CPC1706 provides 2500Vrms of input to output
isolation. The relay output is constructed with efficient
MOSFET switches that use IXYS Integrated Circuits
Division's patented OptoMOS architecture. The input,
a highly efficient GaAlAS infrared LED, controls the
optically coupled output.
The combination of low on-resistance and high load
current handling capability makes this relay suitable for
a variety of high performance switching applications.
Applications
•
•
•
•
•
Industrial Controls
Motor Control
Robotics
Medical Equipment—Patient/Equipment Isolation
Instrumentation
• Multiplexers
• Data Acquisition
• Electronic Switching
• I/O Subsystems
• Meters (Watt-Hour, Water, Gas)
• IC Equipment
• Home Appliances
Approvals
• UL 508 Certified Component: File E69938
• CSA Certified Component: Certificate 1172007
Ordering Information
Part #
CPC1706Y
Description
4-Pin (8-Pin Body) Power SIP Package (25 per tube)
Pin Configuration
Switching Characteristics of
Normally Open Devices
Form-A
IF
90%
10%
ILOAD
ton
Pb
DS-CPC1706-R03
toff
e3
www.ixysic.com
1
INTEGRATED CIRCUITS DIVISION
CPC1706
Absolute Maximum Ratings @ 25ºC
Parameter
Blocking Voltage
Reverse Input Voltage
Input control Current
Peak (10ms)
Input Power Dissipation 1
Total Power Dissipation 2
Isolation Voltage, Input to Output
Operational Temperature
Storage Temperature
1
Min
-40
-40
Max
60
5
50
1
150
1600
2500
+85
+125
Units
VP
V
mA
A
mW
mW
Vrms
°C
°C
Absolute Maximum Ratings are stress ratings. Stresses in
excess of these ratings can cause permanent damage to
the device. Functional operation of the device at conditions
beyond those indicated in the operational sections of this
data sheet is not implied.
Derate linearly 3.33 mW / ºC
Derate linearly 16.667 mW / ºC
2
Electrical Characteristics @ 25ºC
Parameter
Output Characteristics
Load Current, Continuous
Peak Load Current
On-Resistance 1
Off-State Leakage Current
Switching Speeds
Turn-On
Turn-Off
Output Capacitance
Input Characteristics
Input Control Current to Activate
Input Control Current to Deactivate
Input Voltage Drop
Reverse Input Current
Input/Output Characteristics
Capacitance Input/Output
1
Conditions
Symbol
Min
Typ
Max
Units
IF=5mA, Free air
IF=5mA, t=10ms
IF=5mA, IL=1A
IF=0mA, VL=60VP
IL
ILPK
RON
ILEAK
-
0.07
-
4
9
0.09
1
ADC
A

µA
IF=0mA, VL=50V, f=1MHz
ton
toff
COUT
-
0.5
0.085
75
5
2
-
IL=1A
IF=5mA
VR=5V
IF
IF
VF
IR
0.4
0.9
-
1.4
1.2
-
5
1.4
10
mA
mA
V
µA
f=1MHz
CI/O
-
2
-
pF
Conditions
Symbol
Min
Typ
Max
Units
-
RJC
-
1.5
-
°C/W
IF=5mA, VL=10V
ms
pF
Measurement taken within 1 second of on-time.
Thermal Characteristics
Parameter
Thermal Resistance (junction to case)
2
www.ixysic.com
R03
INTEGRATED CIRCUITS DIVISION
CPC1706
PERFORMANCE DATA*
Typical LED Forward Voltage Drop
(N=50, IF=5mA, TA=25ºC)
20
15
10
15
10
5
0.290 0.375 0.460 0.545 0.630 0.715 0.800
Turn-On Time (ms)
0.075 0.080 0.085 0.090 0.095 0.100 0.105
Turn-Off Time (ms)
Typical IF for Switch Operation
(N=50, IL=1A, TA=25ºC)
Typical On-Resistance Distribution
(N=50, IF=5mA, IL=1A, TA=25ºC)
Typical Blocking Voltage Distribution
(N=50, TA=25ºC)
Device Count (N)
15
10
5
20
Device Count (N)
20
0
15
10
5
1.2
1.4
1.5
1.6
LED Current (mA)
1.8
1.5
1000
1.4
1.3
IF=50mA
IF=20mA
IF=10mA
IF=5mA
Typical Turn-On
vs. LED Forward Current
(IL=75mA)
600
400
0
20
40
60
Temperature (ºC)
80
100
Typical IF for Switch Operation
vs. Temperature
(IL=1A)
650
Turn-On Time (Ps)
1.7
1.6
1.5
1.4
10
20
30
40
LED Forward Current (mA)
100
95
90
0
20
40
60
Temperature (ºC)
80
100
Typical Turn-On vs. Temperature
(IL=75mA)
130
IF=5mA
550
450
400
350
IF=10mA
300
10
20
30
40
LED Forward Current (mA)
Typical Turn-Off vs. Temperature
(IL=75mA)
110
100
IF=10mA
90
IF=5mA
80
-20
0
20
40
60
Temperature (ºC)
50
120
500
200
-40
0
50
250
-20
84.0
85
0
600
1.3
-40
82.0 82.5 83.0 83.5
Blocking Voltage (VP)
200
Turn-Off Time (Ps)
1.8
800
81.5
Typical Turn-Off
vs. LED Forward Current
(IL=75mA)
105
0
-20
5
81.0
Turn-Off Time (Ps)
1200
Turn-On Time (Ps)
1.6
1.1
-40
10
0.058 0.062 0.066 0.070 0.074 0.078 0.082
On-Resistance (:)
Typical LED Forward Voltage Drop
vs. Temperature
1.2
15
0
0
1.1
LED Forward Voltage (V)
10
1.235 1.240 1.245 1.250 1.255 1.260 1.265
LED Forward Voltage (V)
20
LED Forward Current (mA)
15
0
0
0
Device Count (N)
20
5
5
Typical Turn-Off Time
(N=50, IF=5mA, IL=75mA, TA=25ºC)
20
Device Count (N)
25
Device Count (N)
25
Device Count (N)
30
Typical Turn-On Time
(N=50, IF=5mA, IL=75mA, TA=25ºC)
80
100
70
-40
-20
0
20
40
60
Temperature (ºC)
80
100
* The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please
contact our application department.
R03
www.ixysic.com
3
INTEGRATED CIRCUITS DIVISION
CPC1706
PERFORMANCE DATA*
0.10
DC-Only On-Resistance
vs. Temperature
(IF=5mA, IL=1A)
Typical Load Current
vs. Load Voltage
(IF=5mA, TA=25ºC)
4.0
Maximum Load Current
vs. Temperature
4.5
0.08
0.07
0.06
4.0
Load Current (A)
0.09
Load Current (A)
On-Resistance (:)
3.5
3.0
2.5
2.0
1.5
1.0
0
20
40
60
Temperature (ºC)
80
0.0
0.00
100
Blocking Voltage vs. Temperature
70
Leakage Current (nA)
Blocking Voltage (VP)
86
84
82
80
78
76
-40
-20
0
20
40
60
Temperature (ºC)
80
100
0.10
0.15
0.20
Load Voltage (V)
0.25
-40
0.30
Typical Leakage vs. Temperature
Measured Across Pins 3 & 4
(VL=60V)
-20
0
20
40
60
Temperature (ºC)
80
100
Output Capacitance vs. Load Voltage
500
60
50
40
30
20
10
0
-40
2.5
1.5
0.05
Output Capacitance (pF)
-20
3.0
2.0
0.5
0.05
-40
3.5
450
400
350
300
250
200
150
100
50
-20
0
20
40
60
Temperature (ºC)
80
100
10s
100s
0
10
20
30
40
Load Voltage (V)
50
60
Energy Rating Curve
Load Current (A)
16
12
8
4
0
10Ps 100Ps 1ms 10ms 100ms
Time
1s
* The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please
contact our application department.
4
www.ixysic.com
R03
INTEGRATED CIRCUITS DIVISION
CPC1706
Manufacturing Information
Moisture Sensitivity
All plastic encapsulated semiconductor packages are susceptible to moisture ingression. IXYS Integrated
Circuits Division classified all of its plastic encapsulated devices for moisture sensitivity according to
the latest version of the joint industry standard, IPC/JEDEC J-STD-020, in force at the time of product
evaluation. We test all of our products to the maximum conditions set forth in the standard, and guarantee proper
operation of our devices when handled according to the limitations and information in that standard as well as to any
limitations set forth in the information or standards referenced below.
Failure to adhere to the warnings or limitations as established by the listed specifications could result in reduced
product performance, reduction of operable life, and/or reduction of overall reliability.
This product carries a Moisture Sensitivity Level (MSL) rating as shown below, and should be handled according
to the requirements of the latest version of the joint industry standard IPC/JEDEC J-STD-033.
Device
Moisture Sensitivity Level (MSL) Rating
CPC1706Y
MSL 1
ESD Sensitivity
This product is ESD Sensitive, and should be handled according to the industry standard JESD-625.
Reflow Profile
This product has a maximum body temperature and time rating as shown below. All other guidelines of J-STD-020
must be observed.
Device
Maximum Temperature x Time
CPC1706Y
245ºC for 30 seconds
Board Wash
IXYS Integrated Circuits Division recommends the use of no-clean flux formulations. However, board washing to
remove flux residue is acceptable. Since IXYS Integrated Circuits Division employs the use of silicone coating as
an optical waveguide in many of its optically isolated products, the use of a short drying bake could be necessary
if a wash is used after solder reflow processes. Chlorine- or Fluorine-based solvents or fluxes should not be used.
Cleaning methods that employ ultrasonic energy should not be used.
Pb
R03
e3
www.ixysic.com
5
INTEGRATED CIRCUITS DIVISION
CPC1706
MECHANICAL DIMENSIONS
21.082±0.381
(0.830±0.015)
PCB Hole Pattern
3.302±0.051
(0.130±0.002)
10.160±0.127
(0.400±0.005)
1.75
(0.069)
7º TYP
4 Places
Pin 1
1.778
(0.070)
0.762±0.076
(0.030±0.003)
2.540±0.127
(0.100±0.005)
4.572±0.127
(0.180±0.005)
10.160±0.127
(0.400±0.005)
5.080±0.127
(0.200±0.005)
1.651±0.102
(0.065±0.004)
5.080
(0.200)
10.160
(0.400)
1.016±0.127
(0.040±0.005)
Pin 1
1.150 DIA. x4
(0.045 DIA. x4)
2.540
(0.100)
0.381±0.013
(0.015±0.0005)
1.778
(0.070)
7º TYP
4 Places
Dimensions
mm
(inches)
For additional information please visit our website at: www.ixysic.com
IXYS Integrated Circuits Division makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make
changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in IXYS Integrated
Circuits Division’s Standard Terms and Conditions of Sale, IXYS Integrated Circuits Division assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its
products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right.
The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other
applications intended to support or sustain life, or where malfunction of IXYS Integrated Circuits Division’s product may result in direct physical harm, injury, or death to a person or severe
property or environmental damage. IXYS Integrated Circuits Division reserves the right to discontinue or make changes to its products at any time without notice.
6
Specification: DS-CPC1706-R03
©Copyright 2012, IXYS Integrated Circuits Division
OptoMOS® is a registered trademark of IXYS Integrated Circuits Division
All rights reserved. Printed in USA.
12/16/2012