CPC1907B Single-Pole, Normally Open Power SOIC OptoMOS® Relay INTEGRATED CIRCUITS DIVISION Parameter Blocking Voltage Load Current On-Resistance Rating 60 ±6 0.06 Description Units VP ADC The CPC1907B is a single-pole, normally open (1-Form-A) solid state relay that employs optically coupled MOSFET technology to provide 5000Vrms of input to output isolation. Switching of the efficient MOSFET switches is controlled by the photovoltaic die using the patented OptoMOS architecture while activation of the output is controlled by a highly efficient GaAlAs infrared LED. The combination of low on-resistance and high load current handling capabilities makes the relay suitable for a variety of high-performance switching applications. Features • • • • • • • • • Handle Load Currents Up to ±6ADC or 6Arms 5000Vrms Input/Output Isolation Power SOIC Package 12.5mm External Creepage Distance with Appropriate Layout High Reliability No Moving Parts Low Drive Power Requirements (TTL/CMOS Compatible) Arc-Free With No Snubbing Circuits No EMI/RFI Generation Approvals • UL 508 Certified Component: File E69938 • CSA Industrial Control Switches Approval: Pending Applications • • • • • • • • • • • Industrial Controls Security: Door Latches, Solenoids, Annunciators Motor Control Heating, Ventilation, and Air Conditioning Control (HVAC) Robotics Starter Ignition Circuits Medical Equipment—Patient/Equipment Isolation Instrumentation • Multiplexers • Electronic Switching • I/O Subsystems Home Appliances DC Power Supplies Aerospace Ordering Information Part # CPC1907B Description 8-Pin Power SOIC Package (25 per tube) Pin Configuration 8 1 N/C 7 6 2 3 + LED – LED 5 4 N/C Switching Characteristics of Normally Open Devices Form-A IF 90% 10% ILOAD Pb DS-CPC1907B-R02 ton e3 www.ixysic.com toff 1 INTEGRATED CIRCUITS DIVISION CPC1907B Absolute Maximum Ratings @ 25ºC (Unless Otherwise Noted) Parameter Blocking Voltage Reverse Input Voltage Input control Current Peak (10ms) Input Power Dissipation 1 Total Power Dissipation 2 Isolation Voltage, Input to Output (60 Seconds Maximum) ESD, Human Body Model Operational Temperature Storage Temperature 1 Derate linearly 3.33mW / ºC 2 Derate linearly 20mW / ºC Ratings 60 5 50 1 150 2400 Units V V mA A mW mW 5000 Vrms 8 -40 to +85 -40 to +125 kV °C °C Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. Electrical Characteristics @ 25ºC (Unless Otherwise Noted) Parameter Output Characteristics Load Current, Continuous Peak Load Current On-Resistance1 Off-State Leakage Current Switching Speeds Turn-On Turn-Off Output Capacitance Input Characteristics LED Current to Activate 2 LED Current to Deactivate Input Voltage Drop Reverse Input Current Input/Output Characteristics Capacitance, Input/Output Conditions Symbol Min Typ Max Units free air t = 10ms IL=1A VL=60VP IL ILPK RON ILEAK - - 6 20 0.06 1 ±ADC, Arms ±AP VL=50V, f=1MHz ton toff COUT - 2.7 0.14 340 5 1 - IL=1A IF=5mA VR=5V IF IF VF IR 0.6 0.9 - 1.5 1.2 - 5 1.4 10 mA mA V µA f=1MHz II/O - 2 - pF IF=5mA, IL=100mA 1 Measurement taken within 1 second of on-time. 2 For high temperature operation (TA>60ºC), a LED current of 10mA is recommended. 2 www.ixysic.com µA ms pF R02 INTEGRATED CIRCUITS DIVISION CPC1907B PERFORMANCE DATA @25ºC (Unless Otherwise Noted)* 25 15 10 5 0 20 15 10 5 0 2.10 15 10 5 1.45 1.60 1.75 1.90 2.05 LED Forward Current (mA) 10 5 54.5 55.5 56.0 56.5 57.0 On-Resistance (m:) 20 15 10 5 81.75 57.5 82.50 83.25 84.00 84.75 Blocking Voltage (VP) 85.50 Typical Turn-Off Time vs. LED Forward Current (IL=100mA) 150 6 1.4 1.3 1.2 Turn-Off Time (Ps) 1.5 55.0 Typical Turn-On Time vs. LED Forward Current (IL=100mA) 7 IF=50mA IF=20mA IF=10mA IF=5mA Turn-On Time (ms) LED Forward Voltage (V) 25 Typical Blocking Voltage Distribution (N=50, IF=0mA) 0 2.20 Typical LED Forward Voltage Drop vs. Temperature 1.6 5 0.105 0.115 0.125 0.135 0.145 0.155 0.165 Turn-Off Time (ms) 0 1.30 10 3.90 15 0 5 4 3 2 145 140 135 1 0 1.1 -40 -20 0 20 40 60 Temperature (ºC) 80 100 130 0 Typical IF for Switch Operation (IL=1A) 2.2 10 20 30 40 LED Forward Current (mA) 50 0 Typical Turn-On Time vs. Temperature (IL=100mA) 3.5 2.0 1.8 1.6 1.4 1.2 -40 -20 0 20 40 60 Temperature (ºC) 80 100 50 Typical Turn-Off Time vs. Temperature (IL=100mA) 160 3.0 2.5 2.0 IF=10mA 1.5 10 20 30 40 LED Forward Current (mA) 170 IF=5mA Turn-On Time (ms) LED Current (mA) 2.70 3.00 3.30 3.60 Turn-On Time (ms) Device Count (N) 20 2.40 Typical On-Resistance Distribution (N=50, IF=5mA, IL=1A) 20 Device Count (N) Device Count (N) 25 15 0 1.235 1.240 1.245 1.250 1.255 1.260 1.265 LED Forward Voltage (V) Typical IF for Switch Operation (N=50, IL=100mA) Typical Turn-Off Time (N=50, IF=5mA, IL=100mA) 20 Device Count (N) Device Count (N) Device Count (N) 25 20 Typical Turn-On Time (N=50, IF=5mA, IL=100mA) Turn-Off Time (Ps) 30 Typical LED Forward Voltage Drop (N=50, IF=5mA) 150 140 IF=5mA IF=10mA 130 120 110 1.0 -40 -20 0 20 40 60 Temperature (ºC) 80 100 -40 -20 0 20 40 60 Temperature (ºC) 80 100 *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. R02 www.ixysic.com 3 INTEGRATED CIRCUITS DIVISION CPC1907B PERFORMANCE DATA @25ºC (Unless Otherwise Noted)* Typical On-Resistance vs. Temperature (IF=5mA, IL=1A) 6 65 55 50 45 2 0 -2 -4 40 -6 -0.3 35 -40 -20 0 20 40 60 Temperature (ºC) 80 100 Leakage Current (PA) 88 86 84 82 80 78 -0.1 0.0 0.1 Load Voltage (V) 0.2 -20 0 20 40 60 Temperature (ºC) 80 2 -40 1000 0.8 0.6 0.4 0.2 -20 0 20 40 60 Temperature (ºC) 80 100 Output Capacitance vs. Load Voltage (IF=0mA, f=1MHz) 900 800 700 600 500 400 300 -40 100 3 0.3 0 -40 4 0 -0.2 Output Capacitance (pF) 1.0 90 5 1 Leakage Current vs. Temperature Across Pins 5&6, 7&8 (VL=60V) Typical Blocking Voltage vs. Temperature Blocking Voltage (VP) 6 Load Current (A) 60 Maximum Load Current vs. Temperature (IF=5mA) 7 4 Load Current (A) On-Resistance (m:) 70 Typical Load Current vs. Load Voltage (IF=5mA) -20 0 20 40 60 Temperature (ºC) 80 100 10s 100s 0 10 20 30 Load Voltage (V) 40 50 Energy Rating Curve 35 Load Current (A) 30 25 20 15 10 5 10Ps 100Ps 1ms 10ms 100ms Time 1s *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. 4 www.ixysic.com R02 INTEGRATED CIRCUITS DIVISION CPC1907B Manufacturing Information Moisture Sensitivity All plastic encapsulated semiconductor packages are susceptible to moisture ingression. IXYS Integrated Circuits Division classified all of its plastic encapsulated devices for moisture sensitivity according to the latest version of the joint industry standard, IPC/JEDEC J-STD-020, in force at the time of product evaluation. We test all of our products to the maximum conditions set forth in the standard, and guarantee proper operation of our devices when handled according to the limitations and information in that standard as well as to any limitations set forth in the information or standards referenced below. Failure to adhere to the warnings or limitations as established by the listed specifications could result in reduced product performance, reduction of operable life, and/or reduction of overall reliability. This product carries a Moisture Sensitivity Level (MSL) rating as shown below, and should be handled according to the requirements of the latest version of the joint industry standard IPC/JEDEC J-STD-033. Device Moisture Sensitivity Level (MSL) Rating CPC1907B MSL 1 ESD Sensitivity This product is ESD Sensitive, and should be handled according to the industry standard JESD-625. Reflow Profile This product has a maximum body temperature and time rating as shown below. All other guidelines of J-STD-020 must be observed. Device Maximum Temperature x Time CPC1907B 245ºC for 30 seconds Board Wash IXYS Integrated Circuits Division recommends the use of no-clean flux formulations. However, board washing to remove flux residue is acceptable. Since IXYS Integrated Circuits Division employs the use of silicone coating as an optical waveguide in many of its optically isolated products, the use of a short drying bake could be necessary if a wash is used after solder reflow processes. Chlorine- or Fluorine-based solvents or fluxes should not be used. Cleaning methods that employ ultrasonic energy should not be used. Pb R02 e3 www.ixysic.com 5 INTEGRATED CIRCUITS DIVISION CPC1907B MECHANICAL DIMENSIONS CPC1907B 21.082 ± 0.381 (0.830 ± 0.015) Pin 8 16.764 ± 0.381 (0.660 ± 0.015) 3.302 ± 0.051 (0.130 ± 0.002) 0.127 ± 0.076 (0.005 ± 0.003) 15.90 (0.626) 10.160 ± 0.254 (0.400 ± 0.010) 2.00 (0.079) 0.889 ± 0.127 (0.035 ± 0.005) Pin 1 0.762 ± 0.102 (0.030 ± 0.004) 5.080 ± 0.127 (0.200 ± 0.005) 7.620 ± 0.127 (0.300 ± 0.005) Recommended PCB Pattern 1.524 typ (0.060) 1.016 ± 0.127 (0.040 ± 0.005) 1.651 ± 0.102 (0.065 ± 0.004) 5.080 ± 0.127 (0.200 ± 0.005) 0.381 ± 0.025 (0.015 ± 0.001) Dimensions Unless Otherwise Noted mm (inches) Note: Pin-to-pin tolerances are non-cumulative. 5.080 (0.200) 7.622 (0.300) 5.080 (0.200) 0.95 (0.037) For additional information please visit our website at: www.ixysic.com IXYS Integrated Circuits Division makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in IXYS Integrated Circuits Division’s Standard Terms and Conditions of Sale, IXYS Integrated Circuits Division assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of IXYS Integrated Circuits Division’s product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. IXYS Integrated Circuits Division reserves the right to discontinue or make changes to its products at any time without notice. 6 Specification: DS-CPC1907B-R02 ©Copyright 2013, IXYS Integrated Circuits Division OptoMOS® is a registered trademark of IXYS Integrated Circuits Division All rights reserved. Printed in USA. 2/12/2013