TVS Diode Arrays (SPA®® Diodes) Lightning Surge Protection- SP4024 Series SP4024 Series 1.3pF, 7A Discrete TVS Diode RoHS Pb GREEN Description The SP4024 series integrates low capacitance steering diodes with one or two zener diodes for unidirectional or bidirectional protection, respectively, to protect against ESD and lightning induced surge events. These devices can safely absorb up to 7A per IEC61000-4-5 (tp=8/20μs) without performance degradation and a minimum ±30kV ESD per IEC61000-4-2 International Standard. The low loading capacitance and high surge capability make it ideal for protecting telecommunication ports such as xDSL and other high voltage, high speed legacy interfaces. Pinout Features • ESD, IEC61000-4-2, ±30kV contact, ±30kV air Pin 1 • EFT, IEC61000-4-4, 40A (5/50ns) • Lightning, IEC61000-4-5, 7A (tP=8/20μs) • Low leakage current • Unidirectional and Bidirectional configuration • Small SOD323 package fits 0805 footprints • AEC-Q101 qualified • Low capacitance of 1.3pF (@ VR=0V) Pin 2 Functional Block Diagram Applications 1 1 2 2 Unidirectional Bidirectional SP4024-01FTG SP4021-01FTG SP4024-01FTG-C SP4021-01FTG-C Life Support Note: Not Intended for Use in Life Support or Life Saving Applications The products shown herein are not designed for use in life sustaining or life saving applications unless otherwise expressly indicated. ©2015 Littelfuse, Inc. Specifications are subject to change without notice. Revision: 01/06/15 1 583 • xDSL Interfaces • Security Equipment • RS-232 • Instrumentation • RS-485 • Medical Equipment • Power Ports • Computers and Peripherals TVS Diode Arrays (SPA®® Diodes) Lightning Surge Protection- SP4024 Series Absolute Maximum Ratings Symbol Parameter Value IPP Peak Current (tp=8/20μs) PPk Peak Pulse Power (tp=8/20μs) TOP TSTOR Units 7 A 350 W Operating Temperature -40 to 125 °C Storage Temperature -55 to 150 °C Notes: CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Thermal Information Parameter Rating Units -55 to 150 °C Maximum Junction Temperature 150 °C Maximum Lead Temperature (Soldering 20-40s) 260 °C Storage Temperature Range Electrical Characteristics (TOP=25ºC) Parameter Symbol Test Conditions Reverse Standoff Voltage VRWM IR≤1μA with Pin 1 to Pin 2 Breakdown Voltage VBD IT=1mA with Pin 1 to Pin 2 Leakage Current ILEAK VR=24V with Pin 1 to Pin 2 Clamp Voltage1 Dynamic Resistance RDYN ESD Withstand Voltage1 VESD Diode Capacitance1 CD Typ Max Units 24 V 26 V 0.5 μA IPP=1A, tp=8/20µs, Fwd 34 V IPP=2A, tp=8/20µs, Fwd 36 V IPP=5A, tp=8/20µs, Fwd 43 IPP=7A, tp=8/20µs, Fwd 48 TLP tp=100ns, Pin 1 to Pin 2 0.7 VC 2 Min IEC61000-4-2 (Contact Discharge) ±30 IEC61000-4-2 (Air Discharge) ±30 V 50 V Ω kV kV Reverse Bias=0V, f=1MHz, Pin 1 to Pin 2 1.3 2 pF Note: 1Parameter is guaranteed by design and/or device characterization. 2 Transmission Line Pulse (TLP) test setting : Std.TDR(50Ω),tp=100ns, tr=0.2ns ITLP and VTLP averaging window: star t1=70ns to end t2=80ns Pulse Waveform Capacitance vs. Reverse Bias (Pin 1 to Pin 2) 3.0 110% 100% 2.5 90% 2.0 70% Capacitance (pF) Percent of IPP 80% 60% 50% 40% 30% 20% 1.5 1.0 0.5 10% 0% 0.0 0.0 5.0 10.0 15.0 20.0 25.0 30.0 0 Time (μs) 4 6 8 10 12 14 16 Bias Voltage (V) ©2015 Littelfuse, Inc. Specifications are subject to change without notice. Revision: 01/06/15 2 584 2 18 20 22 24 TVS Diode Arrays (SPA®® Diodes) Lightning Surge Protection- SP4024 Series Transmission Line Pulsing (TLP) Plot (Pin 1 to Pin2) 60.0 25 50.0 20 40.0 TLP Current (A) Clamp Voltage (V C ) Clamping Voltage vs. Peak Pulse Current (Pin 1 to Pin 2) 30.0 20.0 15 10 5 10.0 0.0 1 2 3 4 Peak Pulse Current -I PP 5 (A) 6 0 7 0 10 20 30 40 50 TLP Volts (V) Soldering Parameters Pre Heat Pb – Free assembly - Temperature Min (Ts(min)) 150°C - Temperature Max (Ts(max)) 200°C - Time (min to max) (ts) 60 – 180 secs Average ramp up rate (Liquidus) Temp (TL) to peak 3°C/second max TS(max) to TL - Ramp-up Rate 3°C/second max Reflow - Temperature (TL) (Liquidus) 217°C - Temperature (tL) 60 – 150 seconds Peak Temperature (TP) 260+0/-5 °C Time within 5°C of actual peak Temperature (tp) 20 – 40 seconds Ramp-down Rate 6°C/second max Time 25°C to peak Temperature (TP) 8 minutes Max. Do not exceed 260°C Matte Tin Lead Material Copper Alloy Lead Coplanarity 0.0004 inches (0.102mm) Substrate material Silicon Body Material Molded Epoxy Flammability UL 94 V-0 Notes : 1. All dimensions are in millimeters 2. Dimensions include solder plating. 3. Dimensions are exclusive of mold flash & metal burr. 4. Blo is facing up for mold and facing down for trim/form, i.e. reverse trim/form. 5. Package surface matte finish VDI 11-13. ©2015 Littelfuse, Inc. Specifications are subject to change without notice. Revision: 01/06/15 3 585 Critical Zone TL to TP Ramp-up TL TS(max) tL Ramp-do Ramp-down Preheat TS(min) 25 Product Characteristics Lead Plating tP TP Temperature Reflow Condition tS time to peak temperature Time TVS Diode Arrays (SPA®® Diodes) Lightning Surge Protection- SP4024 Series Part Marking System Part Numbering System SP4024 – 01 F T G – C Blank= Unidirectional C= Bidirectional G= Green T= Tape & Reel SP4024-01FTG TVS Diode Arrays (SPA® Diodes ) Series Number of Channels 24 2 1 SP4024-01FTG-C Package F: SOD323 Ordering Information 24C Part Number Package Marking Min. Order Qty. SP4024-01FTG SOD323 24 3000 SP4024-01FTG-C SOD323 24C 3000 Package Dimensions -SOD323 E SOD323 A2 A1 D b Symbol A E1 0.2 L1 Recommended Solder Pad 1.79 0.45 0.49 c 1.14 Millimeters Inches Min Max Min Max A 0.80 1.14 0.031 0.045 A1 0.00 0.10 0.000 0.004 A2 0.80 1.04 0.031 0.014 b 0.25 0.35 0.010 0.014 c 0.08 0.15 0.003 0.006 D 1.15 1.45 0.045 0.057 E 1.60 1.90 0.063 0.075 E1 2.44 2.70 0.096 0.106 L1 0.25 0.45 0.010 0.018 2.28 2.77 Unit: mm Embossed Carrier Tape & Reel Specification — SOD323 2.00 4.00 ø1.50 ø178 1.75 0 8. R7 6 5. R2 12.3 3000 2500 2000 500 54.4 5.6 .5 1000 R2 R6 A 8.00 A 3.50 1500 B Pin 1 Location 4.00 12.3 B 9.5 0.254 1.25 Cover Tape 2.90 1.46 A-A B-B ©2015 Littelfuse, Inc. Specifications are subject to change without notice. Revision: 01/06/15 4 586