NSD10-D series 10W DC-DC Regulated Dual Output MODEL：NSD10-12D15 OUTPUT FUNCTION TEST NO 1 2 3 4 5 TEST ITEM SPECICATION TEST CONDITION RESULT RIPPLE & NOISE V1: 75 mVp-p (Max ) I/P: 12VDC V1: 21 mVp-p (Max ) V2: 75 mVp-p (Max ) O/P:FULL LOAD Ta:25℃ V2: 21 mVp-p (Max ) OUTPUT VOLTAGE V1: 2 %~ -2 % (Max) I/P: 9.8VDC / 36VDC V1: 1 %~ -1 % TOLERANCE V2: 2 %~ -2 % (Max) O/P:FULL/ MIN Ta:25℃ V2: 1 %~ -1 % LINE REGULATION LOAD REGULATION CROSS REGULATION LOAD VERDICT V1: 1%~ -1 % (Max) I/P: 9.8VDC ~ 36VDC V1: 0.05 %~ -0.05 % V2: 1%~ -1% (Max) O/P:FULL LOAD Ta:25℃ V2: 0.1 %~ -0.1 % V1: 1%~ -1 % (Max) I/P: 12VDC V1: 0.05 %~ -0.05 % V2: 1%~ -1% (Max) O/P:FULL ~MIN LOAD Ta:25℃ V2: 0.05 %~ -0.05 % V1: 1%~ -1 % (Max) I/P: 12V VDC V1: 0.7 %~ -0.7 % V2: 1%~ -1% (Max) O/P: Testing O/P 60%LOAD V2: 0.7 %~ -0.7 % P P P P P Other O/P 40%LOAD Change Ta:25℃ 6 OVER/UNDERSHOOT TEST < +5% I/P: 12 VDC TEST: < 5% O/P:FULL LOAD Ta:25℃ 7 DYNAMIC LOAD V1: 1500 mVp-p I/P: 12VDC P 227 mVp-p O/P:FULL /Min LOAD P 90%DUTY/1KHZ Ta:25℃ INPUT FUNCTION TEST NO 1 TEST ITEM SPECICATION TEST CONDITION INPUT VOLTAGE RANGE 9.8VDC~ 36 VDC I/P:TESTING RESULT VERDICT 8.7 V~ 36 V O/P:FULL LOAD Ta:25℃ I/P: TEST: OK LOW-LINE-0.2V= 9.6 V P HIGH-LINE+5%= 37.8 V O/P:FULL/MIN LOAD ON: 30 Sec . OFF: 30 Sec 10MIN ( AC POWER ON/OFF NO DAMAGE ) 2 EFFICIENCY 77 % (TYP) I/P: 12 VDC 79.1 % O/P:FULL LOAD Ta:25℃ 3 INPUT CURRENT 12 VDC/ 1.4A(TYP) I/P: 12 VDC P I= 1.01 A P O/P:FULL LOAD Ta:25℃ 4 SHUTDOWN IDLE CURRENT 20 mA / 12VDC I/P: 12 VDC 17.8 mA / 12VDC O/P:FULL LOAD Ta:25℃ P Model: NSD10-12D12 Test Report 1 / 4 NSD10-D series 10W DC-DC Regulated Dual Output PROTECTION FUNCTION TEST NO 1 TEST ITEM OVER LOAD PROTECTION SPECICATION Above 105% TEST CONDITION I/P: 12VDC O/P:TESTING Ta:25℃ RESULT VERDICT 148 % / 12V Over power Limiting, recovers automatically after fault P condition is removed 2 OVER VOLTAGE PROTECTION CH1: 17.3 V~ 22.5V I/P: DC SOURSE 21.8 V / CH1 / 0.17A CH2: -17.3 V~ -22.5V O/P:MIN LOAD Ta:25℃ 21.8 V / CH2 / 0.17A Recovers automatically after fault P condition is removed 4 SHORT PROTECTION SHORT EVERY OUTPUT I/P: 36 VDC NO DAMAGE 60 SECOND NO DAMAGE O/P: FULL LOAD Ta:25℃ Constant Current Limiting P CONTROL FUNCTION TEST NO 1 TEST ITEM SPECICATION TEST CONDITION RESULT REMOTE CONTROL Logic “1” OPEN : ON I/P: 12VDC Logic “1” : POWER ON Logic “0” GON : OFF O/P:FULL LOAD Ta:25℃ Logic “0” :POWER OFF Model: NSD10-12D12 VERDICT P Test Report 2 / 4 NSD10-D series 10W DC-DC Regulated Dual Output ENVIRONMENT TEST NO 1 TEST ITEM SPECICATION TEMPERATURE RISE TEST MODEL：NSD10-12D5 TEST CONDITION RESULT VERDICT 1. ROOM AMBIENT BURN-IN：1.5 HRS I/P: 12 VDC O/P: FULL LOAD Ta= 25.1℃ 2. HIGH AMBIENT BURN-IN： 2HRS I/P: 12 VDC O/P: FULL LOAD Ta= 58.2 ℃ NO Position 1 D100 D200 61.1℃ 91.8℃ 69.3℃ 103.1℃ 3 L100 4 C106 33U/10V 125℃ 68.0℃ 98.8℃ 5 C5 105/50V 125℃ 69.9℃ 101.2℃ 6 T1 COIL TS-015 79.5℃ 112.0℃ 7 Q1 BCX56 1A/80V 70.0℃ 101.2℃ 8 Q2 CET1012 10A/120V 73.4℃ 105.5℃ 9 L1 1UH 69.4℃ 100.9℃ 10 U1 TL3843 76.4℃ 107.7℃ CASE 上方中間處 68.4℃ 99.6℃ 11 OVER LOAD BURN-IN TEST SR-26 2A/60V SR-26 2A/60V TS-027 2 2 ROOM AMBIENT HIGH AMBIENT Ta= 25.1 ℃ Ta= 58.2 ℃ 77.8℃ 108.7℃ P/N NO DAMAGE I/P: 12VDC O/P: 120 ﹪LOAD 1 HOUR ( MIN ) P TEST：OK P Ta:25℃ 3 LOW TEMPERATURE TURN ON AFTER 2 HOUR TURN ON TEST I/P: 12 VDC O/P: 100 ﹪LOAD TEST：OK P Ta= -25℃ 4 AFTER 12 HOURS I/P: 39 VDC HIGH TEMPERATURE IN CHAMBER ON CONTROL 60 ℃ O/P:FULL LOAD Ta= 60℃ NO DAMAGE + 0.03 %(0~60℃) I/P: 12 VDC HIGH VOLTAGE TURN ON TEST 5 TEMPERATURE VIBRATION TEST HUMIDITY= P 95 %R.H + 0.006 %(0~60℃) P O/P:FULL LOAD COEFFICIENT 6 TEST：OK HIGH HUMIDITY TEST：OK 1 Carton & 1 Set (1) Waveform: Sine Wave (2) Frequency:10~500Hz (3) Sweep Time:10min/sweep cycle P (4) Acceleration:2G (5) Test Time:1 hour in each axis (X.Y.Z) (6) Ta:25℃ SAFETY TEST NO 1 2 3 TEST ITEM SPECICATION TEST CONDITION RESULT WITHSTAND VOLTAGE I/P-O/P: 1.5KVDC/min I/P-O/P: 1.8KVDC/min Ta:25℃ I/P-O/P: ISOLATION RESISTANCE APPROVAL I/P-O/P:500VDC>100MΩ I/P-O/P: 500 VDC Ta:25℃/70% RH VERDICT 0.002 mA P NO DAMAGE I/P-O/P: 30GΩ P NO DAMAGE TUV: Certificate NO ： P UL: File NO ：E183223 Model: NSD10-12D12 Test Report 3 / 4 NSD10-D series 10W DC-DC Regulated Dual Output E.M.C TEST NO 1 2 3 TEST ITEM RADIATION E.S.D E.F.T SPECICATION TEST CONDITION RESULT EN55022 I/P: 12VDC PASS CLASS B O/P:FULL LOAD Ta:25℃ Test by certified Lab EN61000-4-2 I/P: 12 VDC CRITERIA A LIGHT INDUSTRY AIR:8KV / Contact:4KV O/P:FULL LOAD Ta:25℃ EN61000-4-4 I/P: 12 VDC LIGHT INDUSTRY O/P:FULL LOAD Ta:25℃ INPUT: 1KV 7 VERDICT P P CRITERIA A P Test by certified Lab ＆ Test Report Prepare M.T.B.F & LIFE CYCLE CALCULATION NO 1 TEST ITEM SPECICATION MTBF MIL-HDBK-217F NOTICES2 PARTS COUNT TEST CONDITION RESULT VERDICT P TOTAL FAILURE RATE: 1878.5K HRS COMPONENT STRESS TEST NO 1 TEST ITEM SPECICATION TEST CONDITION RESULT Power Transistor Q2 Rated I/P:High-Line +3V = 39 V (1) 68 V VERDICT ( D to S) or (C to E) Peak Voltage CUE1012 : 120 V 10 A O/P: (1)Full Load Turn on (2) 82 V P (2) Output Short Ta:25℃ 2 Diode Peak Voltage D100 Rated I/P:High-Line +3V = 39 V (1) 187 V EC11FS2-TE12L 1A/200V O/P: (1)Full Load Turn on (2) 75 V D200 Rated (1) 186 V EC11FS2-TE12L 1A/200V (2) 81 V I/P:High-Line +3V = 39 V (1) 38.96 V O/P: (1)Full Load Turn on /Off (2) 39 V (2) Min load Turn on /Off (3) 39 V (2)Output Short Ta:25℃ 3 Input Capacitor Voltage C5 Rated : 105 / 50V P P (3)Full Load /Min load Change Ta:25℃ 4 Control IC Voltage Test U1 Rated I/P:High-Line +3V = 39 V (1) 14.67 V TL3843D : 20 V O/P: (1)Full Load Turn on /Off (2) 11.18 V (2) Min load Turn on /Off (3) 14.67 V P (3)Full Load /Min load Change Ta:25℃ DATE SAMPLE TEST RESULT TESTER APPROVAL 2007/1/11 RD SAMPLE PASS VINCENT TSENG MAX LIN PASS VINCENT TSENG MAX LIN PASS VINCENT TSENG MAX LIN 2007/3/5 2007/5/24 PRODUCT SAMPLE W0702A48 PRODUCT SAMPLE W0705B71 2003/12/12 Model: NSD10-12D12 A50-F023 Test Report 4 / 4