Hybrid Aluminum Electrolytic Capacitors NSPE-Y Series • CYLINDRICAL V-CHIP CONSTRUCTION FOR SURFACE MOUNTING • HIGH TEMPERATURE RANGE (+135°C) * EXPANDED VALUE * • LOW ESR AND HIGH RIPPLE CURRENT RANGE • 6.3x8 ~ 10x12.8mm CASE SIZES • REFLOW SOLDERING RATED TO +260°C (ALL SIZES) • MEETS THE REQUIREMENTS OF AEC-Q200* *Contact NIC for supporting test data CHARACTERISTICS Rated Voltage Range Rated Capacitance Range Operating Temp. Range Capacitance Tolerance Max. Leakage Current After 2 Minutes @ 20°C 25 ~ 63Vdc 10 ~ 330µF -55 ~ +135°C ±20% (M) 0.01CV W.V. (Vdc) S.V. (Vdc) Working and Surge Voltage Ratings Tan δ @ 120Hz/20°C Z -55°C/Z +20°C Z +135°C/Z +20°C W.V. (Vdc) Test Duration Capacitance Change Tan δ and ESR Leakage Current ESR Impedance Ratio Load Life Test @ 135°C and Rated Voltage 25 32 35 44 50 63 63 79 0.16 1 ~ 2.5 0.6 ~ 1.0 25 35 50 63 fd = 6.3mm 1000 Hrs. ±12 Hrs., fd > 2000 Hrs. ±12 Hrs. Within ±30% of initial measured value Less than 200% of specified max. value Less than specified max. value Less than 200% of specified max. value STANDARD PRODUCTS AND CASE SIZES Dφ x L (mm) PART NUMBER NSPE-Y680M25V6.3X8NBF Cap. Working Case Size Max. Tan δ Max. ESR (mΩ) Max. Ripple Current (mA rms) Load Life (μF) Voltage (D X L) mm 120Hz/20°C AT 100KHz/20°C AT 100KHz/135°C Hours (+135°C) 68 6.3X8 0.16 45 780 1000 NSPE-Y151M25V8X10.8NBF 150 NSPE-Y271M25V10X10.8NBF 270 8X10.8 0.16 27 1060 2000 10X10.8 0.16 22 1220 NSPE-Y331M25V10X12.8NBF 2000 330 10X12.8 0.16 16 1390 2000 NSPE-Y470M35V6.3X8NBF 47 6.3X8 0.16 60 730 1000 NSPE-Y101M35V8X10.8NBF 100 8X10.8 0.16 30 1010 2000 NSPE-Y151M35V10X10.8NBF 150 10X10.8 0.16 23 1180 2000 NSPE-Y221M35V10X12.8NBF 220 10X12.8 0.16 17 1360 2000 25 35 NSPE-Y270M40V6.3X8NBF 27 6.3X8 0.16 70 700 1000 NSPE-Y560M40V8X10.8NBF 56 8X10.8 0.16 32 980 2000 NSPE-Y101M40V10X10.8NBF 100 10X10.8 0.16 24 1150 2000 NSPE-Y121M40V10X12.8NBF 120 10X12.8 0.16 18 1320 2000 NSPE-Y150M50V6.3X8NBF 15 6.3X8 0.16 80 670 1000 NSPE-Y330M50V8X10.8NBF 33 8X10.8 0.16 35 940 2000 NSPE-Y560M50V10X10.8NBF 56 10X10.8 0.16 25 1110 2000 NSPE-Y820M50V10X12.8NBF 82 10X12.8 0.16 19 1270 2000 40 50 NSPE-Y100M63V6.3X8NBF 10 6.3X8 0.16 100 590 1000 NSPE-Y220M63V8X10.8NBF 22 8X10.8 0.16 40 870 2000 NSPE-Y330M63V8X10.8NBF 33 NSPE-Y330M63V10X10.8NBF 33 8X10.8 0.16 40 870 2000 10X10.8 0.16 30 1010 NSPE-Y470M63V10X10.8NBF 2000 47 10X10.8 0.16 30 1010 NSPE-Y560M63V10X12.8NBF 2000 56 10X12.8 0.16 22 1150 2000 63 For Automotive Applications See Part Numbering System PRECAUTIONS Please review the notes on correct use, safety and precautions found at www.niccomp.com/precautions If in doubt or uncertainty, please review your specific application - process details with NIC’s technical support personnel: [email protected] 1 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com Hybrid Aluminum Electrolytic Capacitors NSPE-Y Series RIPPLE CURRENT FREQUENCY CORRECTION FACTORS Capacitance (μF) C < 4.7 Frequency 100Hz < F < 1KHz 1KHz < F < 10KHz 10KHz < F < 100KHz 0.03 0.30 0.65 100KHz < F 1.00 4.7 < C < 33 0.05 0.32 0.67 1.00 33 < C 0.10 0.35 0.70 1.00 PART NUMBER SYSTEM NSPE-Y 101 M 35V 8x10.8 N B Y F RoHS Compliant Sn-Bi Finish, 13" Reel Reflow Temp. Code (N=+260°C) Size in mm Working Voltage Tolerance Code M=20% Capacitance Code in µF, first 2 digits are significant Third digit is no. of zeros, “R” indicates decimal for values under 10µF Series Optional: Suitable for automotive equipment, sourced to special production and inspection at TS-16949 certified production site DIMENSIONS (mm) Case Size 6.3X8 8x10.8 10x10.8 10x12.8 Dφ ±0.5 6.3 8.0 10 10 L max. 8 10.8 10.8 12.8 A, B ±0.2 6.6 8.3 10.3 10.3 W 0.5 ~ 0.8 0.7 ~ 1.0 1.0 ~ 1.4 1.0 ~ 1.4 + Dφ I ±0.2 2.5 2.9 3.2 3.2 I Part Marking P ±0.2 2.2 3.2 4.6 4.6 I Series Code Lot Code Y__ 22 63V W 0.3mm max. A L Capacitance Value P Voltage B Temperature - Deg. C RECOMMENDED REFLOW SOLDERING PROFILE* 260 230 Case Dia. 6.3 8 10 Time Above 217°C (80 seconds max.) 200 150 100 LAND PATTERN DIM. (mm) Peak Temperature (260°C/5 seconds) Time Above 230°C (40 seconds max.) A 1.8 4.1 4.4 B 1.8 2.1 2.5 + Time Above 200°C (100 seconds max.) P 3.6 2.8 4.3 - Preheat - 120 seconds max. (see table for temperature) B 50 Time (Seconds) A PEAK TEMPERATURE AND DURATION Diameter 6.3 ~ 10mm Preheat Time above (120 sec. max.) 200°C 150°C ~ 190°C 100 sec. max. Time above 217°C 80 sec. max. Time above 230°C 40 sec. max. P A Peak Temperature 260°C/5 sec. *Two reflow passes are permissible with a cool down to room temperature required between the first and second pass. 2 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com Hybrid Aluminum Electrolytic Capacitors NSPE-Y Series Taping Specifications (mm) 1. Both Leader and Trailer tape: Minimum 40mm (1.57") empty carrier tape pockets. 2. Leader tape: Approximately 20cm of cover tape at leader. 4 + 0.1 3. Connection: Maximum 3 connections (slices) per reel. D ±0.1 7.5 11.5 11.5 11.5 P ±0.1 12.0 16.0 16.0 16.0 T ±0.2 8.2 11.1 11.2 13.3 t max. 0.6 0.6 0.6 0.6 REEL DIMENSIONS (mm) Case Size 6.3X8 8X10.8 10X10.8 10X12.8 W ±1.0 18 26 26 26 - B C ±0.3 16.0 24.0 24.0 24.0 D B ±0.5 7.0 8.7 10.7 10.7 t + A P Feeding T 2mm ± 0.5mm Qty per Reel 13" (330mm) 15" (380mm) 500 900 300 500 300 500 300 400 φ13mm ± 0.5mm φ50mm min. 6.3X8 8X10.8 10X10.8 10X12.8 A ±0.5 7.0 8.7 10.7 10.7 1.75 ± C Case Size 1.75 + 0.15 1.5∅ +0.1/1.5φ+0.1/-0 φ21mm ± 0.8mm φ330mm ± 2.0mm or φ380mm ± 2.0mm 3 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com W www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE 3mm www.SMTmagnetics.com