Specification for a Bandpass Cavity Filter MtronPTI P/N UF9282R I. General & Electrical Requirements (0˚C to +70˚C): 1. Center Frequency (FC): 5.1GHz 2. 1dB Bandwidth (relative to measured Insertion Loss): 5.025GHz to 5.175GHz minimum 3. Insertion Loss @ 5.1GHz: < 2.0dB 4. Return Loss (from 5.025GHz to 5.175GHz): ≥ 15dB 5. VSWR (from 5.046GHz to 5.154GHz): ≤ 1.432:1 6. Rejection: ≥ 95dB: @ 4.570GHz ≥ 27dB: @ 4.763GHz ≥ 17dB: @ 4.985GHz ≥ 80dB: From 6.000GHz to 10.500GHz ≥ 60dB: from 10.500GHz to 13.000GHz 7. Input Power Level: ≤ +30dBm 8. ZIN/ZOUT: 50 nominal II. Environmental & Physical Requirements: 1. Temperature: Operating: -40°C to +70°C Storage: -65°C to +85°C 2. Humidity: Operating: 0% to 95% wet bulb +40˚C, no condensation Storage: 95% Relative Humidity @ +40˚C for 5-days, no condensation 3. Altitude (operating): 0 to 3048 meters 4. Shock (operating): 20Gs, ½ sine, 11msec shock pulse 5. Vibration (operating): 10Hz to 2KHz, 10Gs III. Package, Packaging & Marking Requirements: 1. Size: Per Figure 1 2. RoHS Compliant: Built with Pb-Free Process, & other environmental requirements per 5951-1745-2 apply 3. Connectors: SMA-Female shall meet the interface requirements of MIL-C-39012 Mating Connector Torque, 80 to 117 N.cm (12-12 in/lb.) Maximum Torque, 170 N.cm (15 in/lb.) 4. Packaging for Shipment: Provide protection for the device using normal transportation Packing material shall be free of electrostatic charges Packing material shall not contain ozone-depleting substances 5. Marking Permanence: The marking shall withstand nominal cleaning Page 1 of 2 Specification for a Bandpass Cavity Filter MtronPTI P/N UF9282R Figure 1: Package Dimensions & Marking IV. Datasheet Revision Table: Date 01/29/13 5/2/10 Rev. 1 0 Author BRM BRM Details of Revision Corrected a typographical error in the 1dB Bandwidth frequency range. Original Release. Page 2 of 2