LF9454 GPS L1 Band Filter datasheet

Specification for a GPS L1 Band Reject LC Filter
MtronPTI P/N: LF9454
I. General & Electrical Requirements
1. Passband 1: 500MHz to 1413MHz
2. Passband 2: 1738MHz to 2600MHz
3. Passband Insertion Loss (500MHz to 1413MHz and 1738MHz to 2600MHz): 0.3dB maximum
4. Return Loss (In Band, 500MHz to 1413MHz and 1738MHz to 2600MHz): 12dB minimum
5. Rejection (1563MHz to 1588MHz): 10dB minimum
6. In-Band Input RF Power: ≤ +52dBm, from 500MHz to 2600MHz @ a +70C baseplate temperature
7. ZIN/ZOUT: 50Ω nominal
II. Environmental & Physical Requirements:
1. Temperature Range
Operating: -20C to +75C
Storage: -50C to +90C
2. Weight: ≤ 3-ounces (estimated)
3. Altitude: 10,000-ft @ CW operation
4. Package: Connectorized
Size: 2.310” (L) x 1.460” (W) x 0.655” (H), excluding connectors
Input/Output Connector Type: SMA-Female
Page 1 of 2
The information contained herein is proprietary to MtronPTI and is submitted in confidence.
This information may not be copied or divulged without the express written permission of MtronPTI
Specification for a GPS L1 Band Reject LC Filter
MtronPTI P/N: LF9454
III. Design Simulation Plots:
IV. Data Sheet Revision Table:
Date
01/16/14
Rev.
D
Author
BRM
09/09/13
C
BRM
06/06/13
B
BRM
Details of Revision
Respecified as a LC Filter implementation.
Modified the specifications for the maximum Insertion Loss and the physical package size per customer
agreement.
Initial Release.
Page 2 of 2
The information contained herein is proprietary to MtronPTI and is submitted in confidence.
This information may not be copied or divulged without the express written permission of MtronPTI