Specification for a Switched 7 LC Filter Assembly MtronPTI P/N: SA0068 I. General & Electrical Requirements Parameter Minimum Frequency Cutoff Frequency Insertion Loss Rejection @ 2nd Harmonic Ultimate Attenuation, Over 1.0GHz to 1.5GHz Passband Signal Power, CW ZS/ZL, nominal Band 1 30MHz 43MHz ≤ 1.3dB ≥ 30dB ≥ 50dB ≤ 30W 50Ω Band 2 43MHz 65MHz ≤ 1.3dB ≥ 30dB ≥ 50dB ≤ 30W 50Ω Band 3 65MHz 90MHz ≤ 1.3dB ≥ 30dB ≥ 50dB ≤ 30W 50Ω Band 4 116MHz 174MHz ≤ 1.3dB ≥ 30dB ≥ 50dB ≤ 30W 50Ω Band 5 174MHz 220MHz ≤ 1.3dB ≥ 30dB ≥ 50dB ≤ 30W 50Ω Band 6 220MHz 320MHz ≤ 1.3dB ≥ 30dB ≥ 50dB ≤ 30W 50Ω Band 7 320MHz 512MHz ≤ 1.3dB ≥ 30dB ≥ 50dB ≤ 30W 50Ω Additional Parameters: Switching Time: ≤ 6µsec II. Environmental & Physical Requirements: 1. Temperature Range Operating: -40C to +60C Storage: -45C to +85C 2. DC Power Supply: +100VDC @ 15mA maximum 3. Package: Size: Maximum 2.500” (L) x 2.500” (W) x 0.500” (H) Excluding RF and Control Pins Mounting Method: Thru-Holes for Customer hardware (Ref. Figure 1) Package Drawing: Ref. Figure 1 Control Interface: Seven (7) control lines o +100V, @ 15mA maximum, Off State (Reverse Biased) o -5V, @ 50mA maximum, On State (Forward Biased) o Only one (1) control line can be forward biased at any time (i.e.; Break-Before-Make) Figure 1: Package Outline Drawing Rev. B 03/26/2014 Page 1 of 4 The information contained herein is proprietary to MtronPTI and is submitted in confidence. This information may not be copied or divulged without the express written permission of MtronPTI Specification for a Switched 7 LC Filter Assembly MtronPTI P/N: SA0068 III. Design Simulation Plots: 1. Simulations are conducted on a 7 channel assembly with lossy transmission line models in place to represent the interconnecting manifold. All individual filter response plots are of a circuit containing all seven filters with PIN diodes models set to select the simulated channel. 2. Coarse PIN diode models and biasing circuits were included in the simulations 3. All channels meet the specifications with adequate margin to ensure conformance over the Operating Temperature Range. Rev. B 03/26/2014 Page 2 of 4 The information contained herein is proprietary to MtronPTI and is submitted in confidence. This information may not be copied or divulged without the express written permission of MtronPTI Specification for a Switched 7 LC Filter Assembly MtronPTI P/N: SA0068 III. Design Simulation Plots (continued): Rev. B 03/26/2014 Page 3 of 4 The information contained herein is proprietary to MtronPTI and is submitted in confidence. This information may not be copied or divulged without the express written permission of MtronPTI Specification for a Switched 7 LC Filter Assembly MtronPTI P/N: SA0068 III. Design Simulation Plots (continued): Rev. B 03/26/2014 Page 4 of 4 The information contained herein is proprietary to MtronPTI and is submitted in confidence. This information may not be copied or divulged without the express written permission of MtronPTI