ALUMINUM ELECTROLYTIC CAPACITORS AQ Wide Temperature Range, Permissible Abnormal Voltage (Radial Lead Type) series Improved safety feature for abnormally excessive voltage. High ripple current product. Compliant to the RoHS directive (2011/65/EU). AQ Smaller AS Specifications Item Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance Leakage Current Tangent of loss angle (tan δ) Performance Characteristics –40 to +105°C 200 · 400V 10 to 220µF ± 20% at 120Hz, 20°C After 1 minute's application of rated voltage at 20°C, leakage current is 0.04CV+100 (µA) or less. 200 0.15 Rated voltage (V) tan δ (MAX.) 400 0.15 Measurement frequency:120Hz at 20°C Rated voltage (V) Stability at Low Temperature Z– 25°C / Z+20°C Impedance ratio ZT / Z20 (MAX.) Z– 40°C / Z+20°C 200 3 6 Measurement frequency : 120Hz 400 8 10 The specifications listed at right shall be met when the Within ±20% of the initial capacitance value Capacitance change capacitors are restored to 20°C after D.C. bias plus rated 200% or less than the initial specified value tan δ ripple current is applied for 2000 hours at 105°C, the peak Less than or equal to the initial specified value Leakage current voltage shall not exceed the rated voltage. After storing the capacitors under no load at 105°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. Endurance Shelf Life The pressure relief vent will operate in normal conditions, with no dangerous conditons such as flames, ignitions or dispersion of pieces of the capacitor and / or case. Test conditions voltage (V) Safety Performance Test Voltage 300VDC and 375VDC 500VDC and 600VDC Limited DC current 4A 2A 200 400 Printed with white color letter on dark brown sleeve. Marking Radial Lead Type Type numbering system (Example : 200V 100µF) Sleeve (P.E.T.) φd 1 2 3 4 5 6 7 8 9 10 11 12 U AQ 2 D 1 0 1 MHD φD+ P±0.5 MAX. Size code Configuration Capacitance tolerance (±20%) Rated capacitance (100µF) (mm) Pressure relief vent φD 10 12.5 16 L+ MAX. 15MIN 18 Rated voltage (200V) 22 Series name 0.5 0.5 0.5 0.5 1.0 4MIN P 5.0 5.0 7.5 7.5 Type 10 Configuration φd 0.6 0.6 0.8 0.8 1.0 (φD 18) 2.0 (φD >18) 3.0 Dimensions V(Code) Cap.(µF) Code 010 100 022 220 033 330 047 470 056 560 068 680 082 820 100 101 150 151 180 181 220 221 φD φ10 φ12.5 10 × 20 120 10 × 25 160 0.10 × 31.5 195 12.5 × 20.0 160 12.5 × 20.0 195 12.5 × 25.0 210 12.5 × 25.0 250 12.5 × 31.5 285 12.5 × 35.5 335 200 (2D) φ16 Frequency 50, 60Hz 0.80 120Hz 1.00 300Hz 1.25 1kHz 1.40 10 PD 12.5 to 18 22 HD RD 400 (2G) φ18 φ22 φ12.5 12.5 × 20.0 100 12.5 × 31.5 145 12.5 × 40.0 195 16 × 20 285 16 × 25 335 0.16 × 31.5 435 0.16 × 35.5 495 Frequency coefficient of rated ripple current Coefficient Pb-free leadwire Pb-free PET sleeve φD In case L>25 for φ12.5 (D) case sizes, lead diameter φ0.8 (d) will be applied. • Please refer to page 20 about the end seal configuration. 10kHz or more 1.60 18 × 20 335 18 × 25 435 18 × 31.5 495 0.18 × 35.5 575 22 × 20 435 22 × 25 495 φ16 16 × 20 145 16 × 25 195 0.16 × 35.5 280 0.16 × 35.5 320 16 × 40 350 φ18 φ22 18 × 20 195 18 × 25 280 18 × 31.5 320 18 × 35.5 350 18 × 40 420 22 × 20 280 22 × 25 320 Case size φD×L (mm) Rated ripple Rated ripple current (mArms) at 105°C 120Hz : In case of low profile type, 6 will be put at 12th digit of type numbering system. : For further low profile product, 3 will be put at 12th digit. Please refer to page 20, 21, 22 about the formed or taped product spec. Please refer to page 4 for the minimum order quantity. CAT.8100D