Polypropylene Pulse/High Frequency Capacitors A72 Series Polypropylene Film/Foil, Axial Overview Applications The A72 Series is constructed of polypropylene film and metal foil or metallized film and metal foil with axial leads of tinned wire. The axial leads are electrically welded to the metal layer on the ends of the capacitor winding. The capacitor is encapsulated in a polyester tape wrapping case with thermosetting resin material. Two different winding constructions are used depending on voltage parameters. Please see the Performance Characteristics for more information. Typical applications include switching spikes suppression and resonant capacitors in switched mode power supply (SMPS), and deflection circuits in televisions (S-correction and flyback tuning) as well as applications with high voltage and high current. Not suitable for across-the-line application (see Suppressor Capacitors). Benefits • Voltage range: 100 – 2,000 VDC • Capacitance range: 47 pF – 0.33 µF • Diameter: 5 – 22.5 mm • Length: 11 – 33 mm • Capacitance tolerance: ±5%, ±10%, ±20% • Climatic category: 55/105/56 IEC 60068-1 • Operating temperature range of -55˚C to +105˚C • RoHS compliance and lead-free terminations • Tape and reel packaging in accordance with IEC 60286–1 •Self-healing Click image above for interactive 3D content Open PDF in Adobe Reader for full functionality Part Number System A72 E Series Rated Voltage (VDC) Polypropylene Film/ Foil E = 100 I = 250 M = 400 P = 630 Q = 1000 S = 1500 U = 2000 F Length (mm) F = 11 H= 14 K = 20.5 Q = 28 T = 33 1470 Capacitance Code (pF) The last three digits represent significant figures. The first digit specifies the total number of zeros to be added. AA 00 J Packaging Internal Use See Ordering Options Table 00, 02 (Standard) Capacitance Tolerance J = ±5% K = ±10% M = ±20% One world. One KEMET © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3039_A72_AXIAL • 7/27/2015 1 Film Capacitors Polypropylene Pulse/High Frequency Capacitors – A72 Series Polypropylene Film/Foil, Axial Ordering Options Table Type of Leads and Packaging Lead and Packaging Code Lead Length (mm) Bulk (Bag) – Straight Leads Tape & Reel (Standard Reel) 40 +/-5 AA 26 Dimensions – Millimeters SIDE VIEW FRONT VIEW LL L LL D d D L d D L d Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance 5.0 6.5 7.0 7.5 8.0 8.0 8.0 8.5 8.5 8.5 9.0 9.0 Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum 11.0 16.5 16.5 16.5 16.5 20.5 28.0 16.5 20.5 28.0 16.5 28.0 Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum 0.5 0.6 0.6 0.6 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 9.5 9.5 10.0 Maximum Maximum Maximum 20.5 28.0 28.0 Maximum Maximum Maximum 0.8 0.8 0.8 ±0.05 ±0.05 ±0.05 11.0 11.0 11.5 12.5 13.0 13.5 13.5 14.0 16.0 16.5 18.0 19.0 19.5 20.0 22.5 Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum 20.5 28.0 28.0 28.0 28.0 28.0 33.0 33.0 33.0 33.0 33.0 33.0 33.0 33.0 33.0 Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 1.0 1.0 1.0 1.0 1.0 1.0 1.0 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 Note: See Ordering Options Table for lead length (LL / I) options. Note: See Ordering Options Table for lead length (LL / I) options. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3039_A72_AXIAL • 7/27/2015 2 Film Capacitors Polypropylene Pulse/High Frequency Capacitors – A72 Series Polypropylene Film/Foil, Axial Performance Characteristics Dielectric Plates Winding Leads Protection Related Documents Polypropylene film Metal foil for 1 section, metal foil + metallized film for 2 sections Non-inductive type Tinned wire Plastic case, thermosetting resin filled. Box material is solvent resistant and flame retardant according to UL94. IEC 60384-13 Sections 1 Voltage Range (VDC) 100 250 Voltage Range (VAC) 63 Capacitance Range (µF) Capacitance Values Capacitance Tolerance Operating temperature Range Rated Temperature TR Voltage Derating 0.0047 – 0.01 2 400 630 1000 125 160 300 400 450 500 0.0022 – 0.015 0.000047 – 0.01 0.0033 – 0.1 0.0022 – 0.068 0.001 – 0.047 0.015 – 0.33 1500 2000 E6 series (IEC 60063) measured @ 1 kHz and +20 ±1°C ±5%, ±10%, ±20% -55°C to +105°C +85°C Above +85°C DC and AC voltage derating is 1.25%/°C 55/105/56 IEC 60068-1 Climatic Category Average relative humidity ≤ 75% RH = 95% for 30 days per year RH = 85% for further days limited by average value per year Test Voltage Capacitance Drift Maximum Pulse Steepness Temperature Coefficient Self Inductance (Lead Length ~ 2 mm) 2 x VR VDC for 2 s (between terminations) @ +25°C ±5°C Maximum 0.5% after a 2 year storage period at a temperature of +10°C to +40°C and a relative humidity of 40% to 60% dV/dt according to Table 1. For peak to peak voltages lower than rated voltage (Vpp<VR), the specified dv/dt can be multiplied by the factor VR /Vpp -(150 ±70) ppm/°C at 1 kHz Maximum 1 nH per 1 mm lead and capacitor length. Measured at 25°C ±5°C Dissipation Factor tanδ Frequency C ≤ 0.1 µF C ≥ 0.1 µF 10 kHz 0.05% 0.05% 100 kHz 0.10% – Measured at +25°C, 100 VDC 60 seconds Insulation Resistance Minimum Values Between Terminals All Capacitance Values ≥ 100,000 MΩ ( ≥ 500,000 MΩ ) * * typical value © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3039_A72_AXIAL • 7/27/2015 3 Film Capacitors Polypropylene Pulse/High Frequency Capacitors – A72 Series Polypropylene Film/Foil, Axial Maximum Voltage (Vrms) vs. Frequency (Sinusoidal Waveform/Th ≤ +40ºC) © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3039_A72_AXIAL • 7/27/2015 4 Film Capacitors Polypropylene Pulse/High Frequency Capacitors – A72 Series Polypropylene Film/Foil, Axial Maximum Current (Irms) vs. Frequency (Sinusoidal Waveform/Th ≤ +40ºC) © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3039_A72_AXIAL • 7/27/2015 5 Film Capacitors Polypropylene Pulse/High Frequency Capacitors – A72 Series Polypropylene Film/Foil, Axial Environmental Test Data Damp Heat, Steady State Test Test Conditions: Temperature: Relative humidity (RH): Test duration: Endurance Test Performances +40°C ±2°C 93% ±2% 56 days |Δ C/C| ≤ 2%, Δ tanδ ≤ 0.0005 @ 1 kHz IR after test ≥ 50% of initial limit Test Conditions Temperature: Voltage applied: Test duration: Resistance to Soldering Heat Test Performances +85°C ±2°C 1.5 x VR (DC) 1,000 hours |Δ C/C| ≤ 2%, Δ tanδ ≤ 0.0005 @ 1 kHz IR after test ≥ 50% of initial limit Test Conditions Solder bath temperature: Dipping time (with heat screen): Performances 260°C ±5°C |Δ C/C| ≤ 1%, Δ tanδ ≤ 0.0005 @ 1 kHz IR after test ≥ initial limit 10 seconds ±1 second Environmental Compliance All KEMET pulse capacitors are RoHS Compliant, except A72 Series components with capacitance values < 4,700 pF. Table 1 – Ratings & Part Number Reference Capacitance Dimensions in mm Value (µF) D Max L Max VDC VAC 100 100 100 250 250 250 250 250 250 400 400 400 400 400 400 400 400 400 400 400 400 400 63 63 63 125 125 125 125 125 125 160 160 160 160 160 160 160 160 160 160 160 160 160 0.0047 0.0068 0.010 0.0022 0.0033 0.0047 0.0068 0.010 0.015 0.000047 0.000068 0.00010 0.00015 0.00022 0.00033 0.00047 0.00068 0.0010 0.0015 0.0022 0.0033 0.0047 5.0 5.0 5.0 5.0 5.0 7.0 7.0 7.5 8.5 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 6.5 6.5 7.0 VDC VAC Capacitance Value (µF) B (mm) dV/dt (V/µs) Max K0 (V2/µs) New KEMET Part Number Legacy Part Number 11.0 11.0 11.0 11.0 11.0 16.5 16.5 16.5 16.5 11.0 11.0 11.0 11.0 11.0 11.0 11.0 11.0 11.0 11.0 16.5 16.5 16.5 3,000 3,000 3,000 5,000 5,000 4,500 4,500 4,500 4,500 13,000 13,000 13,000 13,000 13,000 13,000 13,000 13,000 13,000 13,000 6,500 6,500 6,500 600,000 600,000 600,000 2,500,000 2,500,000 2,250,000 2,250,000 2,250,000 2,250,000 10,400,000 10,400,000 10,400,000 10,400,000 10,400,000 10,400,000 10,400,000 10,400,000 10,400,000 10,400,000 5,200,000 5,200,000 5,200,000 72EF1470(1)00(2) 72EF1680(1)00(2) 72EF2100(1)00(2) 72IF1220(1)00(2) 72IF1330(1)00(2) 72II1470(1)00(2) 72II1680(1)00(2) 72II2100(1)00(2) 72II2150(1)00(2) 72ΜF0047(1)00(2) 72ΜF0068(1)00(2) 72ΜF0100(1)00(2) 72ΜF0150(1)00(2) 72ΜF0220(1)00(2) 72ΜF0330(1)00(2) 72ΜF0470(1)00(2) 72ΜF0680(1)00(2) 72ΜF1100(1)00(2) 72ΜF1150(1)00(2) 72MI1220(1)00(2) 72MI1330(1)00(2) 72MI1470(1)00(2) A72EF1470(1)00(2) A72EF1680(1)00(2) A72EF2100(1)00(2) A72IF1220(1)00(2) A72IF1330(1)00(2) A72II1470(1)00(2) A72II1680(1)00(2) A72II2100(1)00(2) A72II2150(1)00(2) A72ΜF0047(1)00(2) A72ΜF0068(1)00(2) A72ΜF0100(1)00(2) A72ΜF0150(1)00(2) A72ΜF0220(1)00(2) A72ΜF0330(1)00(2) A72ΜF0470(1)00(2) A72ΜF0680(1)00(2) A72ΜF1100(1)00(2) A72ΜF1150(1)00(2) A72MI1220(1)00(2) A72MI1330(1)00(2) A72MI1470(1)00(2) H (mm) dV/dt (V/µs) Max K0 (V2/µs) New KEMET Part Number Legacy Part Number (1) Insert lead and packaging code. See Ordering Options Table for available options. (2) J = 5%, K = 10%, M = 20%. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3039_A72_AXIAL • 7/27/2015 6 Film Capacitors Polypropylene Pulse/High Frequency Capacitors – A72 Series Polypropylene Film/Foil, Axial Table 1 – Ratings & Part Number Reference cont'd Capacitance Dimensions in mm Value (µF) D Max L Max VDC VAC 400 400 630 630 630 630 630 630 630 630 630 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,500 1,500 1,500 1,500 1,500 1,500 1,500 1,500 1,500 1,500 2,000 2,000 2,000 2,000 2,000 2,000 160 160 300 300 300 300 300 300 300 300 300 400 400 400 400 400 400 400 400 400 400 450 450 450 450 450 450 450 450 450 450 500 500 500 500 500 500 0.0068 0.010 0.015 0.022 0.033 0.047 0.068 0.10 0.15 0.22 0.33 0.0033 0.0047 0.0068 0.010 0.015 0.022 0.033 0.047 0.068 0.10 0.0022 0.0033 0.0047 0.0068 0.010 0.015 0.022 0.033 0.047 0.068 0.0010 0.0015 0.0022 0.0033 0.0047 0.0068 8.0 9.0 8.5 9.5 9.0 10.0 11.5 13.5 14.0 16.5 19.5 8.5 9.5 8.0 8.5 10.0 11.0 13.0 14.0 16.0 19.0 8.0 9.5 8.5 8.5 9.5 11.0 12.5 13.5 16.0 18.0 8.5 9.5 11.0 9.0 9.5 11.0 VDC VAC Capacitance Value (µF) B (mm) dV/dt (V/µs) Max K0 (V2/µs) New KEMET Part Number Legacy Part Number 16.5 16.5 20.5 20.5 28.0 28.0 28.0 28.0 33.0 33.0 33.0 20.5 20.5 28.0 28.0 28.0 28.0 28.0 33.0 33.0 33.0 20.5 20.5 28.0 28.0 28.0 28.0 28.0 33.0 33.0 33.0 20.5 20.5 20.5 28.0 28.0 28.0 6,500 6,500 4,300 4,300 2,600 2,600 2,600 2,600 1,800 1,800 1,800 14,000 14,000 5,000 5,000 5,000 5,000 5,000 3,700 3,700 3,700 17,000 17,000 6,000 6,000 6,000 6,000 6,000 4,500 4,500 4,500 27,000 27,000 27,000 9,800 9,800 9,800 5,200,000 5,200,000 5,418,000 5,418,000 3,276,000 3,276,000 3,276,000 3,276,000 2,268,000 2,268,000 2,268,000 28,000,000 28,000,000 10,000,000 10,000,000 10,000,000 10,000,000 10,000,000 7,400,000 7,400,000 7,400,000 51,000,000 51,000,000 18,000,000 18,000,000 18,000,000 18,000,000 18,000,000 13,500,000 13,500,000 13,500,000 108,000,000 108,000,000 108,000,000 39,200,000 39,200,000 39,200,000 72MI1680(1)00(2) 72MI2100(1)00(2) 72PK2150(1)00(2) 72PK2220(1)00(2) 72PQ2330(1)00(2) 72PQ2470(1)00(2) 72PQ2680(1)00(2) 72PQ3100(1)00(2) 72PT3150(1)00(2) 72PT3220(1)00(2) 72PT3330(1)00(2) 72QK1330(1)02(2) 72QK1470(1)02(2) 72QQ1680(1)02(2) 72QQ2100(1)02(2) 72QQ2150(1)02(2) 72QQ2220(1)02(2) 72QQ2330(1)02(2) 72QT2470(1)02(2) 72QT2680(1)02(2) 72QT3100(1)02(2) 72SK1220(1)00(2) 72SK1330(1)00(2) 72SQ1470(1)00(2) 72SQ1680(1)00(2) 72SQ2100(1)00(2) 72SQ2150(1)00(2) 72SQ2220(1)00(2) 72ST2330(1)00(2) 72ST2470(1)00(2) 72ST2680(1)00(2) 72UK1100(1)00(2) 72UK1150(1)00(2) 72UK1220(1)00(2) 72UQ1330(1)00(2) 72UQ1470(1)00(2) 72UQ1680(1)00(2) A72MI1680(1)00(2) A72MI2100(1)00(2) A72PK2150(1)00(2) A72PK2220(1)00(2) A72PQ2330(1)00(2) A72PQ2470(1)00(2) A72PQ2680(1)00(2) A72PQ3100(1)00(2) A72PT3150(1)00(2) A72PT3220(1)00(2) A72PT3330(1)00(2) A72QK1330(1)02(2) A72QK1470(1)02(2) A72QQ1680(1)02(2) A72QQ2100(1)02(2) A72QQ2150(1)02(2) A72QQ2220(1)02(2) A72QQ2330(1)02(2) A72QT2470(1)02(2) A72QT2680(1)02(2) A72QT3100(1)02(2) A72SK1220(1)00(2) A72SK1330(1)00(2) A72SQ1470(1)00(2) A72SQ1680(1)00(2) A72SQ2100(1)00(2) A72SQ2150(1)00(2) A72SQ2220(1)00(2) A72ST2330(1)00(2) A72ST2470(1)00(2) A72ST2680(1)00(2) A72UK1100(1)00(2) A72UK1150(1)00(2) A72UK1220(1)00(2) A72UQ1330(1)00(2) A72UQ1470(1)00(2) A72UQ1680(1)00(2) H (mm) dV/dt (V/µs) Max K0 (V2/µs) New KEMET Part Number Legacy Part Number (1) Insert lead and packaging code. See Ordering Options Table for available options. (2) J = 5%, K = 10%, M = 20%. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3039_A72_AXIAL • 7/27/2015 7 Film Capacitors Polypropylene Pulse/High Frequency Capacitors – A72 Series Polypropylene Film/Foil, Axial Soldering Process The implementation of the RoHS directive has resulted in the selection of SnAgCu (SAC) alloys or SnCu alloys as primary solder. This has increased the liquidus temperature from that of 183ºC for SnPb eutectic alloy to 217 – 221ºC for the new alloys. As a result, the heat stress to the components, even in wave soldering, has increased considerably due to higher pre-heat and wave temperatures. Polypropylene capacitors are especially sensitive to heat (the melting point of polypropylene is 160 – 170ºC). Wave soldering can be destructive, especially for mechanically small polypropylene capacitors (with lead spacing of 5 mm to 15 mm), and great care has to be taken during soldering. The recommended solder profiles from KEMET should be used. Please consult KEMET with any questions. In general, the wave soldering curve from IEC Publication 61760-1 Edition 2 serves as a solid guideline for successful soldering. Please see Figure 1. Reflow soldering is not recommended for through-hole film capacitors. Exposing capacitors to a soldering profile in excess of the above the recommended limits may result to degradation or permanent damage to the capacitors. Do not place the polypropylene capacitor through an adhesive curing oven to cure resin for surface mount components. Insert throughhole parts after the curing of surface mount parts. Consult KEMET to discuss the actual temperature profile in the oven, if through-hole components must pass through the adhesive curing process. A maximum two soldering cycles is recommended. Please allow time for the capacitor surface temperature to return to a normal temperature before the second soldering cycle. Manual Soldering Recommendations Wave Soldering Recommendations 300 Following is the recommendation for manual soldering with a soldering iron. 2+3s max 260°C 250 First wave Temperature (°C) Recommended Soldering Temperature Soldering iron bit temperature (deg C) 400 350 300 250 Second wave 200 Cooling ΔT <150°C Preheating 150 ca 2°C/s ca 3.5°C/s typical Tpreheat 100 ca 5°C/s 115°C max 100°C Typical 200 50 150 100 0 0 50 40 80 120 160 200 240 Time (s) 0 0 1 2 3 4 5 6 7 8 Soldering time (sec) The soldering iron tip temperature should be set at 350°C (+10°C maximum) with the soldering duration not to exceed more than 3 seconds. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3039_A72_AXIAL • 7/27/2015 8 Film Capacitors Polypropylene Pulse/High Frequency Capacitors – A72 Series Polypropylene Film/Foil, Axial Soldering Process cont'd Wave Soldering Recommendations cont'd 1. The table indicates the maximum set-up temperature of the soldering process Figure 1 Dielectric Film Material Maximum Preheat Temperature Maximum Peak Soldering Temperature Capacitor Capacitor Capacitor Capacitor Capacitor Pitch Pitch Pitch Pitch Pitch ≤ 10 mm = 15 mm > 15 mm ≤ 15 mm > 15 mm Polyester 130°C 130°C 130°C 270°C 270°C Polypropylene 100°C 110°C 130°C 260°C 270°C Paper 130°C 130°C 140°C 270°C 270°C Polyphenylene Sulphide 150°C 150°C 160°C 270°C 270°C 2. The maximum temperature measured inside the capacitor: Set the temperature so that inside the element the maximum temperature is below the limit: Dielectric Film Material Maximum temperature measured inside the element Polyester 160°C Polypropylene 110°C Paper 160°C Polyphenylene sulphide 160°C Temperature monitored inside the capacitor. Selective Soldering Recommendations Selective dip soldering is a variation of reflow soldering. In this method, the printed circuit board with through-hole components to be soldered is preheated and transported over the solder bath as in normal flow soldering without touching the solder. When the board is over the bath, it is stopped and pre-designed solder pots are lifted from the bath with molten solder only at the places of the selected components, and pressed against the lower surface of the board to solder the components. The temperature profile for selective soldering is similar to the double wave flow soldering outlined in this document, however, instead of two baths, there is only one bath with a time from 3 to 10 seconds. In selective soldering, the risk of overheating is greater than in double wave flow soldering, and great care must be taken so that the parts are not overheated. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3039_A72_AXIAL • 7/27/2015 9 e 3 Sections 4 Sections Film Capacitors Polypropylene Pulse/High Frequency Capacitors – A72 Series Polypropylene Film/Foil, Axial Construction Polypropylene Film/Foil 1 Section Metal Foil (Fourth Layer) Margin Metal Foil Metallized Polyphenylene Sulfide Film with Vacuum-Evaporated Aluminum Electrodes Lead Thermosetting Resin End-Fill Detailed Cross Section Margin Metal Contact Layer Polypropylene Film Dielectric Metal Foil Single-sided Metallized Polypropylene Film Lead Polyester Tape Wrapping Polypropylene Film (First Layer) Metal Foil 1 Section 2 Sections (Second Layer) Margin Polypropylene Film (Third Layer) Thermosetting Metal Contact Resin End-Fill Layer Polypropylene Film Dielectric Polyester Tape Wrapping AXIAL - Polypropylene Film/Foil Winding Schemes Polypropylene Film Dielectric Metal Foil Single-sided Metallized Polypropylene Film Polypropylene Film Dielectric Metal Foil 1 Section 2 Sections AXIAL - Single-sided Metallized Polyester Film AXIAL - Double-sided Metallized Polyester Film Single-sided Metallized Polyester Film 1 Section Polypropylene Film Dielectric Double-sided Metallized Polyester Carrier Film 2 Sections © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com Single-sided Metallized Polypropylene Film F3039_A72_AXIAL • 7/27/2015 10 Film Capacitors Polypropylene Pulse/High Frequency Capacitors – A72 Series Polypropylene Film/Foil, Axial Marking Capacitance Capacitance Tolerance Series Dielectric Code Voltage (VDC) Packaging Quantities Diameter Length Bulk Long Leads Standard Reel ø 355 mm Diameter Length Bulk Long Leads Standard Reel ø 355 mm 5.0 6.5 7.0 7.5 8.0 8.0 8.0 8.5 8.5 8.5 9.0 9.0 9.5 9.5 10.0 11.0 16.5 16.5 16.5 16.5 20.5 28.0 16.5 20.5 28.0 16.5 28.0 20.5 28.0 28.0 1,500 2,000 1,750 1,500 1,250 1,000 500 1,000 750 500 1,000 500 750 500 500 3,000 1,200 1,100 1,000 900 900 900 800 800 800 800 800 600 600 600 11.0 11.0 11.5 12.5 13.0 13.5 13.5 14.0 16.0 16.5 18.0 19.0 19.5 20.0 22.5 20.5 28.0 28.0 28.0 28.0 28.0 33.0 33.0 33.0 33.0 33.0 33.0 33.0 33.0 33.0 500 500 300 300 300 300 300 300 200 200 200 150 150 150 100 400 400 400 400 400 300 300 300 250 250 200 150 150 150 – © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3039_A72_AXIAL • 7/27/2015 11 Film Capacitors Polypropylene Pulse/High Frequency Capacitors – A72 Series Polypropylene Film/Foil, Axial Lead Taping & Packaging (IEC 60286–1) Table 1 Taping Specification Description Symbol Dimensions (mm) Component diameter Body length Component lead spacing Reel core diameter Arbor hole diameter Reel diameter Tape width Body location (lateral deviation) Body location (longitudinal deviation) Tape spacing Lead length from the component body to the adhesive tape Distance between reel flanges D L A(1) E M ø H G 4.5 – 19.5 11 – 33 See Table 1 85 30 355 maximum 6 ±0.5/9 ±1(2) ≤ 0.7 N ≤ 1.2 B See Table 2 I ≥ 20 C See Table 2 (1) Maximum cumulative feed hole error 1.5 mm per 6 parts. (2) 9 ±1 for capacitor with L ≥ 31.5. Dimensions in mm Diameter A ≤5 5.1 – 9.5 9.6 – 14.7 14.8 – 19.5 5 ±0.5 10 ±0.5 15 ±0.5 20 ±1.0 Table 2 Dimensions in mm Length Class B±1.5 C ≤ 11 14 – 20.5 ≥ 26 I II III 52.4 63.6 73 75 86 98 © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3039_A72_AXIAL • 7/27/2015 12 Film Capacitors Polypropylene Pulse/High Frequency Capacitors – A72 Series Polypropylene Film/Foil, Axial KEMET Corporation World Headquarters Europe Asia Southern Europe Sasso Marconi, Italy Tel: 39-051-939111 Northeast Asia Hong Kong Tel: 852-2305-1168 Mailing Address: P.O. Box 5928 Greenville, SC 29606 Skopje, Macedonia Tel: 389-2-55-14-623 Shenzhen, China Tel: 86-755-2518-1306 www.kemet.com Tel: 864-963-6300 Fax: 864-963-6521 Central Europe Landsberg,Germany Tel: 49-8191-3350800 Corporate Offices Fort Lauderdale, FL Tel: 954-766-2800 Kamen, Germany Tel: 49-2307-438110 North America Northern Europe Wyboston,UnitedKingdom Tel: 44-1480-273082 Taipei, Taiwan Tel: 886-2-27528585 Espoo, Finland Tel: 358-9-5406-5000 Southeast Asia Singapore Tel: 65-6701-8033 2835 KEMET Way Simpsonville, SC 29681 Southeast Lake Mary, FL Tel: 407-855-8886 Northeast Wilmington, MA Tel: 978-658-1663 Central Novi, MI Tel: 248-994-1030 Beijing, China Tel: 86-10-5877-1075 Shanghai, China Tel: 86-21-6447-0707 Seoul, South Korea Tel: 82-2-6294-0550 Penang, Malaysia Tel: 60-4-6430200 Bangalore, India Tel: 91-806-53-76817 West Milpitas, CA Tel: 408-433-9950 Mexico Guadalajara, Jalisco Tel: 52-33-3123-2141 Note: KEMET reserves the right to modify minor details of internal and external construction at any time in the interest of product improvement. KEMET does not assume any responsibility for infringement that might result from the use of KEMET Capacitors in potential circuit designs. KEMET is a registered trademark of KEMET Electronics Corporation. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3039_A72_AXIAL • 7/27/2015 13 Film Capacitors Polypropylene Pulse/High Frequency Capacitors – A72 Series Polypropylene Film/Foil, Axial Disclaimer Allproductspecifications,statements,informationanddata(collectively,the“Information”)inthisdatasheetaresubjecttochange.Thecustomerisresponsibleforcheckingand verifyingtheextenttowhichtheInformationcontainedinthispublicationisapplicabletoanorderatthetimetheorderisplaced. AllInformationgivenhereinisbelievedtobeaccurateandreliable,butitispresentedwithoutguarantee,warranty,orresponsibilityofanykind,expressedorimplied. StatementsofsuitabilityforcertainapplicationsarebasedonKEMETElectronicsCorporation’s(“KEMET”)knowledgeoftypicaloperatingconditionsforsuchapplications,butare notintendedtoconstitute–andKEMETspecificallydisclaims–anywarrantyconcerningsuitabilityforaspecificcustomerapplicationoruse.TheInformationisintendedforuseonly bycustomerswhohavetherequisiteexperienceandcapabilitytodeterminethecorrectproductsfortheirapplication.AnytechnicaladviceinferredfromthisInformationorotherwise providedbyKEMETwithreferencetotheuseofKEMET’sproductsisgivengratis,andKEMETassumesnoobligationorliabilityfortheadvicegivenorresultsobtained. Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur.Accordingly,customerapplicationswhichrequireahighdegreeofreliabilityorsafetyshouldemploysuitabledesignsorothersafeguards(suchasinstallationofprotective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Althoughallproduct–relatedwarnings,cautionsandnotesmustbeobserved,thecustomershouldnotassumethatallsafetymeasuresareindictedorthatothermeasuresmaynot berequired. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3039_A72_AXIAL • 7/27/2015 14