FEC15 FEC15 SERIES DC-DC CONVERTER 2:1 WIDE INPUT RANGE UP TO 15Watts FEATURES APPLICATIONS • 1600VDC INPUT TO OUTPUT ISOLATION • STANDARD 2.00 X 1.00 X 0.40 INCH • SIX-SIDED CONTINUOUS SHIELD • UL60950-1, EN60950-1, & IEC60950-1 SAFETY APPROVALS • CE MARKED • COMPLIANT TO RoHS II & REACH 1600VDC ISOLATION REMOTE CONTROL OCP SCP • WIRELESS NETWORK • TELECOM/DATACOM • INDUSTRY CONTROL SYSTEM • DISTRIBUTED POWER ARCHITECTURES • SEMICONDUCTOR EQUIPMENT OVP TECHNICAL SPECIFICATION All specifications are typical at nominal input, full load and 25 Model Number FEC15-12S33 FEC15-12S05 FEC15-12S12 FEC15-12S15 FEC15-12D05 FEC15-12D12 FEC15-12D15 FEC15-24S33 FEC15-24S05 FEC15-24S12 FEC15-24S15 FEC15-24D05 FEC15-24D12 FEC15-24D15 FEC15-48S33 FEC15-48S05 FEC15-48S12 FEC15-48S15 FEC15-48D05 FEC15-48D12 FEC15-48D15 Input Range Output Voltage VDC VDC 9 ~ 18 9 ~ 18 9 ~ 18 9 ~ 18 9 ~ 18 9 ~ 18 9 ~ 18 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75 3.3 5 12 15 ±5 ±12 ±15 3.3 5 12 15 ±5 ±12 ±15 3.3 5 12 15 ±5 ±12 ±15 Output Current @Full Load Min. Load (1) mA 0 15 0 0 0 0 ±10 0 15 0 10 0 0 0 0 0 10 0 0 0 0 otherwise noted Input Current @ No Load Efficiency Maximum Capacitor Load (2) mA % µF 30 25 25 20 20 30 35 15 10 20 15 15 25 25 10 20 15 15 10 15 15 79 82 86 86 83 86 84 80 84 85 85 84 86 86 81 83 87 86 85 88 87 Full Load mA 4000 3000 1250 1000 ±1500 ±625 ±500 4000 3000 1250 1000 ±1500 ±625 ±500 4000 3000 1250 1000 ±1500 ±625 ±500 10200 7050 1035 705 ±1020 ±495 ±165 10200 7050 1035 705 ±1020 ±495 ±165 10200 7050 1035 705 ±1020 ±495 ±165 PART NUMBER STRUCTURE FEC15 - 48 Series Name Input Voltage (VDC) 12: 9~18 24: 18~36 48: 36~75 S Output Quantity S: Single D: Dual 1 05 Output Voltage (VDC) 3P3: 3.3 05: 5 12: 12 15: 15 05: ±5 12: ±12 15: ±15 - P HS Remote Control Option Assembly Option P: Positive logic N: Negative logic www.PDUKE.com : No assembly HS: Heat-sink HC: Heat-sink with Clamp 2015/2/26 FEC15 INPUT SPECIFICATIONS Parameter Conditions 12Vin(nom) 24Vin(nom) 48Vin(nom) Operating input voltage range Input reflected ripple current Start up time Input surge voltage Nominal input and Full load Constant resistive load 100 ms, max. Input filter Remote ON/OFF (Option) Referred to –Vin pin OUTPUT SPECIFICATIONS Parameter Typ. Max. Unit 9 18 36 12 24 48 20 20 18 36 75 VDC Power up 12Vin(nom) 24Vin(nom) 48Vin(nom) Positive logic DC-DC ON DC-DC OFF Negative logic DC-DC ON DC-DC OFF Input current of Ctrl pin Remote off input current Conditions Voltage accuracy Line regulation Load regulation Low Line to High Line at Full Load Min. Load to Full Load Cross regulation Ripple and noise Asymmetrical load 25%/100% FL Measured by 20MHz bandwidth Temperature coefficient Transient response recovery time Over voltage protection 25% load step change Zener diode clamp Over load protection Short circuit protection Min. -0.5 Min. 1 minute Isolation resistance Isolation capacitance Switching frequency 500VDC 3.3Vout 5Vout 12Vout 15Vout % % % % mVp-p +0.02 %/ µs VDC 150 % Continuous, automatics recovery Conditions Min. Input to Output Input(Output) to Case Typ. Max. 1600 1600 1 450 270 Safety approvals Unit VDC 500 300 300 550 330 GΩ pF kHz UL60950-1 EN60950-1 IEC60950-1 Nickel-coated copper Non-conductive black plastic Epoxy (UL94 V-0) 27g (0.95oz) 2.318 x 106 hrs MIL-HDBK-217F, Full load Conditions Min. With derating Typ. -40 Without heat-sink With heat-sink Max. Unit +100 +100 +125 -55 Vertical direction by natural convection (20LFM) Thermal shock Vibration Relative humidity 2 Unit +1.0 +0.5 +0.5 +1.0 +5.0 250 3.9 6.2 15 18 Single Dual ENVIRONMENTAL SPECIFICATIONS Parameter Max. 50 75 % of Iout rated Isolation voltage Operating ambient temperature Maximum case temperature Storage temperature range Thermal impedance Typ. -0.02 GENERAL SPECIFICATIONS Parameter Case material Base material Potting material Weight MTBF 36 VDC 50 100 Pi type Open or 3.5 ~ 12VDC Short or 0 ~ 1.2VDC Short or 0 ~ 1.2VDC Open or 3.5 ~ 12VDC +1.0 mA 20 mA -1.0 -0.5 -0.5 -1.0 -5.0 Single Dual Dual Single Dual mAp-p ms 12 10 /W MIL-STD-810F MIL-STD-810F 5% to 95% RH www.PDUKE.com 2015/2/26 FEC15 EMC SPECIFICATIONS Parameter EMI (3) ESD Radiated immunity Fast transient (4) Surge (4) Conducted immunity Conditions EN55022 EN61000-4-2 EN61000-4-3 EN61000-4-4 EN61000-4-5 EN61000-4-6 Level Class A, Class B Perf. Criteria B Perf. Criteria A Perf. Criteria B Perf. Criteria B Perf. Criteria A Air ± 8kV and Contact ± 6kV 10 V/m ± 2kV ± 1kV 10 Vr.m.s Note: 1. 2. 3. 4. The output requires a minimum loading on the output to maintain specified regulation. Operation under no-load condition will not damage these devices, however they may not meet all listed specification. Test by minimum input and constant resistive load. The standard modules meet EN55022 Class A and Class B with external components. For further information, please contact with P-DUKE. An external input filter capacitor is required if the module has to meet EN61000-4-4, EN61000-4-5. The filter capacitor Power Mate suggest: Nippon chemi-con KY series, 220µF/100V. CAUTION: This power module is not internally fused. An input line fuse must always be used. CHARACTERISTIC CURVE FEC15-48S05 Derating Curve FEC15-48S05 Derating Curve With Heat-sink FEC15-48S05 Efficiency vs. Input Voltage FEC15-48S05 Efficiency vs. Output Load MECHANICAL DRAWING PIN CONNECTION PIN 1 2 3 4 5 6 SINGLE +Vin -Vin +Vout No pin -Vout Ctrl(Option) DUAL +Vin -Vin +Vout Common -Vout Ctrl(Option) 1. All dimensions in inch (mm) 2. Tolerance :x.xx±0.02 (x.x±0.5) x.xxx±0.01 (x.xx±0.25) 3. Pin pitch tolerance ±0.01 (0.25) 4. Pin dimension tolerance ±0.004(0.1) 3 www.PDUKE.com 2015/2/26