FEC30W SERIES DC-DC CONVERTER 4 : 1 ULTRA WIDE INPUT RANGE UP TO 30Watts FEATURES APPLICATIONS • NO MINIMUM LOAD REQUIRED • 1600VDC INPUT TO OUTPUT ISOLATION • STANDARD 2.00 X 1.60 X 0.40 INCH • SIX-SIDED CONTINUOUS SHIELD • UL60950-1, EN60950-1, & IEC60950-1 SAFETY APPROVALS • CE MARKED • COMPLIANT TO RoHS II & REACH 1600VDC ISOLATION REMOTE CONTROL UVP OCP • WIRELESS NETWORK • TELECOM/DATACOM • INDUSTRY CONTROL SYSTEM • DISTRIBUTED POWER ARCHITECTURES • SEMICONDUCTOR EQUIPMENT SCP OVP OTP TECHNICAL SPECIFICATION All specifications are typical at nominal input, full load and 25℃ otherwise noted Model Number FEC30-24S1P5W FEC30-24S1P8W FEC30-24S2P5W FEC30-24S3P3W FEC30-24S05W FEC30-24S12W FEC30-24S15W FEC30-24D12W FEC30-24D15W FEC30-48S1P5W FEC30-48S1P8W FEC30-48S2P5W FEC30-48S3P3W FEC30-48S05W FEC30-48S12W FEC30-48S15W FEC30-48D12W FEC30-48D15W Input Range Output Voltage Output Current @Full Load Input Current @ No Load Efficiency Maximum Capacitor Load (1) VDC 10 ~ 40 10 ~ 40 10 ~ 40 10 ~ 40 10 ~ 40 10 ~ 40 10 ~ 40 10 ~ 40 10 ~ 40 18 ~ 75 18 ~ 75 18 ~ 75 18 ~ 75 18 ~ 75 18 ~ 75 18 ~ 75 18 ~ 75 18 ~ 75 VDC 1.5 1.8 2.5 3.3 5 12 15 ±12 ±15 1.5 1.8 2.5 3.3 5 12 15 ±12 ±15 A 8 8 8 6 6 2.5 2 ±1.25 ±1 8 8 8 6 6 2.5 2 ±1.25 ±1 mA 35 35 40 50 65 65 70 30 35 20 20 25 30 30 35 45 25 25 % 80 83 85 87 87 87 88 84 85 80 83 86 87 88 87 88 85 86 µF 65000 65000 33000 19500 10200 3300 1100 ±1000 ±680 65000 65000 33000 19500 10200 3300 1100 ±1000 ±680 PART NUMBER STRUCTURE FEC30 - 48 Series Name Input Voltage (VDC) 24: 10~40 48: 18~75 S Output Quantity S: Single D: Dual 1 05 Output Voltage (VDC) 1P5: 1.5 1P8: 1.8 2P5: 2.5 3P3: 3.3 05: 5 12: 12 15: 15 12: ±12 15: ±15 W Input Range 4:1 www.PDUKE.com N HS Remote Control Option Assembly Option : Positive logic N: Negative logic : No Assembly Option HS: Heat-sink HC: Heat-sink & Clamp 2015/2/26 FEC30W INPUT SPECIFICATIONS Parameter Conditions Operating input voltage range 24Vin(nom) 48Vin(nom) Input reflected ripple current Start up voltage Constant resistive load Input surge voltage 100 ms, max. Input filter Remote ON/OFF Referred to –Vin pin OUTPUT SPECIFICATIONS Parameter Positive logic DC-DC ON (Standard) DC-DC OFF Negative logic DC-DC ON (Option) DC-DC OFF Input current of Ctrl pin Remote off input current Conditions Voltage accuracy Line regulation Low Line to High Line at Full Load Load regulation No Load to Full Load Cross regulation Voltage adjustability Ripple and noise Asymmetrical load 25%/100% FL Temperature coefficient Transient response recovery time Over voltage protection Over load protection Short circuit protection 20MHz bandwidth With a 0.1µF/50V MLCC Single Dual Dual Unit 40 75 VDC 1 minute Isolation resistance Isolation capacitance Switching frequency Safety approvals 500VDC mAp-p 10 18 VDC 8 16 10 10 -0.5 Min. VDC ms 50 100 L-C type Open or 3 ~ 12VDC Short or 0 ~ 1.2VDC Short or 0 ~ 1.2VDC Open or 3 ~ 12VDC +0.5 3.0 Typ. VDC mA mA Max. Unit -1.0 -0.5 +1.0 +0.5 % -0.5 -1.0 -5.0 -10 +0.5 +1.0 +5.0 +10 Others 5Vout 12Vout, 15Vout 60 75 100 % % % % mVp-p +0.02 250 3.9 3.9 3.9 3.9 6.2 15 18 1.5Vout 1.8Vout 2.5Vout 3.3Vout 5Vout 12Vout 15Vout % of Iout rated Isolation voltage 2 Max. 24 48 20 -0.02 25% load step change Zener diode clamp GENERAL SPECIFICATIONS Parameter Case material Base material Potting material Weight MTBF Typ. 10 18 24Vin(nom) 48Vin(nom) 24Vin(nom) 48Vin(nom) Power up Remote ON/OFF 24Vin(nom) 48Vin(nom) Shutdown voltage Start up time Min. %/℃ µs VDC 150 % Continuous, automatics recovery Conditions Input to Output Input (Output) to Case Min. 1600 1600 1 270 MIL-HDBK-217F, Full load www.PDUKE.com Typ. Max. Unit VDC GΩ pF 300 kHz UL60950-1 EN60950-1 IEC60950-1 Nickel-coated copper FR4 PCB Epoxy (UL94 V-0) 48g (1.69oz) 7.598 x 105 hrs 1000 330 2015/2/26 FEC30W ENVIRONMENTAL SPECIFICATIONS Parameter Operating ambient temperature Maximum case temperature Over temperature protection Storage temperature range Thermal impedance Conditions Min. With derating Typ. -40 Max. Unit +85 +100 +115 -55 Vertical direction by natural convection (20LFM) Without heat-sink With heat-sink Thermal shock Vibration Relative humidity +125 10 8.24 /W MIL-STD-810F MIL-STD-810F 5% to 95% RH EMC SPECIFICATIONS Parameter EMI (2) ESD Radiated immunity Fast transient (3) Surge (3) Conducted immunity Conditions EN55022 EN61000-4-2 EN61000-4-3 EN61000-4-4 EN61000-4-5 EN61000-4-6 Level Air ± 8kV and Contact ± 6kV 10 V/m ±2kV ±1kV 10 Vr.m.s Class A, Class B Perf. Criteria B Perf. Criteria A Perf. Criteria A Perf. Criteria B Perf. Criteria A Note: 1. 2. 3. Test by minimum input and constant resistive load. The standard modules meet EN55022 Class A and Class B with external components. For further information, please contact with P-DUKE. An external input filter capacitor is required if the module has to meet EN61000-4-4, EN61000-4-5. The filter capacitor Power Mate suggest: Nippon chemi-con KY series, 220µF/100V. CAUTION: This power module is not internally fused. An input line fuse must always be used. CHARACTERISTIC CURVE 3 FEC30-48S05W Derating Curve FEC30-48S05W Derating Curve With Heat-sink FEC30-48S05W Efficiency vs. Input Voltage FEC30-48S05W Efficiency vs. Output Load www.PDUKE.com 2015/2/26 FEC30W MECHANICAL DRAWING PIN CONNECTION PIN 1 2 4 5 6 7 8 SINGLE +Vin -Vin Ctrl No pin +Vout -Vout Trim DUAL +Vin -Vin Ctrl +Vout Common -Vout Trim EXTERNAL OUTPUT TRIMMING Output can be externally trimmed by using the method shown below. ( ) for dual output trim. TRIM UP 7(7) TRIM DOWN 8(8) RU 8(8) RD 6(5) 1. All dimensions in inch (mm) 2. Tolerance :x.xx±0.02 (x.x±0.5) x.xxx±0.01 (x.xx±0.25) 3. Pin pitch tolerance ±0.01 (0.25) 4. Pin dimension tolerance ±0.004(0.1) 4 www.PDUKE.com 2015/2/26