FED20W SERIES DC-DC CONVERTER 4 : 1 ULTRA WIDE INPUT RANGE UP TO 20Watts FEATURES APPLICATIONS • 1600VDC INPUT TO OUTPUT ISOLATION • STANDARD 2.00 X 1.00 X 0.40 INCH • SIX-SIDED CONTINUOUS SHIELD • UL60950-1, EN60950-1, & IEC60950-1 SAFETY APPROVALS • CE MARKED • COMPLIANT TO RoHS II & REACH 1600VDC ISOLATION REMOTE CONTROL UVP OCP • WIRELESS NETWORK • TELECOM/DATACOM • INDUSTRY CONTROL SYSTEM • DISTRIBUTED POWER ARCHITECTURES • SEMICONDUCTOR EQUIPMENT SCP OVP TECHNICAL SPECIFICATION All specifications are typical at nominal input, full load and 25℃ otherwise noted Model Number FED20-24S3P3W FED20-24S05W FED20-24S12W FED20-24S15W FED20-24D05W FED20-24D12W FED20-24D15W FED20-48S3P3W FED20-48S05W FED20-48S12W FED20-48S15W FED20-48D05W FED20-48D12W FED20-48D15W Input Range Output Voltage Output Current @Full Load Input Current @ No Load Efficiency Maximum Capacitor Load (1) VDC 9 ~ 36 9 ~ 36 9 ~ 36 9 ~ 36 9 ~ 36 9 ~ 36 9 ~ 36 18 ~ 75 18 ~ 75 18 ~ 75 18 ~ 75 18 ~ 75 18 ~ 75 18 ~ 75 VDC 3.3 5 12 15 ±5 ±12 ±15 3.3 5 12 15 ±5 ±12 ±15 mA 5500 4000 1670 1330 ±2000 ±833 ±667 5500 4000 1670 1330 ±2000 ±833 ±667 mA 50 65 22 22 55 30 30 35 35 15 15 35 17 17 % 85 88 86 86 88 87 87 85 88 87 87 89 88 88 µF 18000 9600 1650 1050 ±4800 ±825 ±525 18000 9600 1650 1050 ±4800 ±825 ±525 PART NUMBER STRUCTURE FED20 - 48 Series Name Input Voltage (VDC) 24: 9~36 48: 18~75 S Output Quantity S: Single D: Dual 1 05 Output Voltage (VDC) 3P3: 3.3 05: 5 12: 12 15: 15 05: ±5 12: ±12 15: ±15 W Input Range 4:1 www.PDUKE.com N HS Remote Control Option Assembly Option : Positive logic N: Negative logic : No Assembly Option HS: Heat-sink HC: Heat-sink & Clamp 2015/2/26 FED20W INPUT SPECIFICATIONS Parameter Conditions Operating input voltage range 24Vin(nom) 48Vin(nom) Input reflected ripple current Start up voltage Constant resistive load Input surge voltage 100 ms, max. Input filter Remote ON/OFF Referred to –Vin pin OUTPUT SPECIFICATIONS Parameter Load regulation No Load to Full Load Cross regulation Voltage adjustability Ripple and noise Asymmetrical load 25%/100% FL Single output 20MHz bandwidth With a 0.1µF/50V MLCC Single Case material Base material Potting material Weight MTBF 2 mAp-p VDC -0.5 ms 50 100 Pi type Open or 3 ~ 12VDC Short or 0 ~ 1.2VDC Short or 0 ~ 1.2VDC Open or 3 ~ 12VDC +0.5 2.5 Typ. -1.0 -0.2 -0.5 -0.5 -1.0 -5.0 -10 3.3Vout Others All VDC VDC mA mA Max. Unit +1.0 +0.2 +0.5 +0.5 +1.0 +5.0 +10 % 60 75 100 % % % % mVp-p -0.02 25% load step change Zener diode clamp 3.3Vout 5Vout 12Vout 15Vout % of Iout rated GENERAL SPECIFICATIONS Parameter Case grounding Isolation resistance Isolation capacitance Switching frequency Safety approvals VDC Min. Single Dual Single Dual Dual Dual Isolation voltage Unit 36 75 7.5 15 20 20 Conditions Low Line to High Line at Full Load Over load protection Short circuit protection Max. 24 48 20 9 18 Positive logic DC-DC ON (Standard) DC-DC OFF Negative logic DC-DC ON (Option) DC-DC OFF Input current of Ctrl pin Remote off input current Voltage accuracy Line regulation Temperature coefficient Transient response recovery time Over voltage protection Typ. 9 18 24Vin(nom) 48Vin(nom) 24Vin(nom) 48Vin(nom) Power up Remote ON/OFF 24Vin(nom) 48Vin(nom) Shutdown voltage Start up time Min. 1 minute Conditions Input to Output Input (Output) to Case 500VDC MIL-HDBK-217F, Full load www.PDUKE.com +0.02 %/℃ 250 µs 3.9 6.2 VDC 15 18 150 % Continuous, automatics recovery Min. Typ. Max. Unit 1600 VDC 1600 Connect case to –Vin with decoupling Y Cap 1 GΩ 1500 pF 360 400 440 kHz UL60950-1 EN60950-1 IEC60950-1 Nickel-coated copper FR4 PCB Epoxy (UL94 V-0) 27g (0.95oz) 1.851 x 106 hrs 2015/2/26 FED20W ENVIRONMENTAL SPECIFICATIONS Parameter Conditions Operating ambient temperature Maximum case temperature Storage temperature range Thermal impedance Min. Without derating With derating Typ. -40 +66 Without heat-sink With heat-sink Unit +66 +105 +105 +125 -55 Vertical direction by natural convection (20LFM) Max. 12 10 /W Thermal shock Vibration Relative humidity MIL-STD-810F MIL-STD-810F 5% to 95% RH EMC SPECIFICATIONS Parameter EMI (2) ESD Radiated immunity Fast transient (3) Surge (3) Conducted immunity Conditions EN55022 EN61000-4-2 EN61000-4-3 EN61000-4-4 EN61000-4-5 EN61000-4-6 Level Air ± 8kV and Contact ± 6kV 10 V/m ±2kV ±1kV 10 Vr.m.s Class A, Class B Perf. Criteria B Perf. Criteria A Perf. Criteria B Perf. Criteria A Perf. Criteria A Note: 1. 2. 3. Test by minimum input and constant resistive load. The standard modules meet EN55022 Class A and Class B with external components. For further information, please contact with P-DUKE. An external input filter capacitor is required if the module has to meet EN61000-4-4, EN61000-4-5. The filter capacitor Power Mate suggest: Nippon chemi-con KY series, 220µF/100V. CAUTION: This power module is not internally fused. An input line fuse must always be used. CHARACTERISTIC CURVE 3 FED20-48S05W Derating Curve FED20-48S05W Derating Curve With Heat-sink FED20-48S05W Efficiency vs. Input Voltage FED20-48S05W Efficiency vs. Output Load www.PDUKE.com 2015/2/26 FED20W MECHANICAL DRAWING PIN CONNECTION PIN 1 2 3 4 5 6 SINGLE +Vin -Vin +Vout Trim -Vout Ctrl DUAL +Vin -Vin +Vout Common -Vout Ctrl EXTERNAL OUTPUT TRIMMING Output can be externally trimmed by using the method shown below. TRIM UP TRIM DOWN 5 4 RU 4 RD 3 1. All dimensions in inch (mm) 2. Tolerance :x.xx±0.02 (x.x±0.5) x.xxx±0.01 (x.xx±0.25) 3. Pin pitch tolerance ±0.01 (0.25) 4. Pin dimension tolerance ±0.004(0.1) 4 www.PDUKE.com 2015/2/26