FED20 FED20 SERIES DC-DC CONVERTER 2:1 WIDE INPUT RANGE UP TO 20Watts FEATURES APPLICATIONS • NO MINIMUM LOAD REQUIRED • 1600VDC INPUT TO OUTPUT ISOLATION • STANDARD 2.00 X 1.00 X 0.40 INCH • SIX-SIDED CONTINUOUS SHIELD • UL60950-1, EN60950-1, & IEC60950-1 SAFETY APPROVALS • CE MARKED • COMPLIANT TO RoHS II & REACH 1600VDC ISOLATION REMOTE CONTROL OCP SCP • WIRELESS NETWORK • TELECOM/DATACOM • INDUSTRY CONTROL SYSTEM • DISTRIBUTED POWER ARCHITECTURES • SEMICONDUCTOR EQUIPMENT OVP TECHNICAL SPECIFICATION All specifications are typical at nominal input, full load and 25 Model Number FED20-12S1P5 FED20-12S1P8 FED20-12S2P5 FED20-12S3P3 FED20-12S05 FED20-12S12 FED20-12S15 FED20-12D12 FED20-12D15 FED20-24S1P5 FED20-24S1P8 FED20-24S2P5 FED20-24S3P3 FED20-24S05 FED20-24S12 FED20-24S15 FED20-24D12 FED20-24D15 FED20-48S1P5 FED20-48S1P8 FED20-48S2P5 FED20-48S3P3 FED20-48S05 FED20-48S12 FED20-48S15 FED20-48D12 FED20-48D15 otherwise noted Input Range Output Voltage Output Current @Full Load Input Current @ No Load Efficiency Maximum Capacitor Load (1) VDC 9 ~ 18 9 ~ 18 9 ~ 18 9 ~ 18 9 ~ 18 9 ~ 18 9 ~ 18 9 ~ 18 9 ~ 18 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75 VDC 1.5 1.8 2.5 3.3 5 12 15 ±12 ±15 1.5 1.8 2.5 3.3 5 12 15 ±12 ±15 1.5 1.8 2.5 3.3 5 12 15 ±12 ±15 mA 6000 6000 6000 5000 4000 1670 1330 ±833 ±667 6000 6000 6000 5000 4000 1670 1330 ±833 ±667 6000 6000 6000 5000 4000 1670 1330 ±833 ±667 mA 70 75 80 115 75 90 35 45 50 35 45 40 30 35 55 40 30 30 15 20 30 15 20 35 50 20 20 % 78 79 83 85 87 86 86 86 86 80 81 84 86 89 87 87 87 88 80 82 84 87 89 88 87 88 88 µF 65000 65000 33000 13000 6800 2200 755 ±680 ±450 65000 65000 33000 13000 6800 2200 755 ±680 ±450 65000 65000 33000 13000 6800 2200 755 ±680 ±450 PART NUMBER STRUCTURE FED20 - 48 Series Name Input Voltage (VDC) 12: 9~18 24: 18~36 48: 36~75 S Output Quantity S: Single D: Dual 1 05 Output Voltage (VDC) 1P5: 1.5 1P8: 1.8 2P5: 2.5 3P3: 3.3 05: 5 12: 12 15: 15 12: ±12 15: ±15 - N HS Remote Control Option Assembly Option : Positive logic N: Negative logic www.PDUKE.com : No assembly HS: Heat-sink HC: Heat-sink with Clamp 2015/2/26 FED20 INPUT SPECIFICATIONS Parameter Conditions 12Vin(nom) 24Vin(nom) 48Vin(nom) Operating input voltage range Input reflected ripple current Start up time Nominal input and Full load Constant resistive load Input surge voltage 100 ms, max. Input filter Remote ON/OFF Voltage accuracy Line regulation Load regulation Cross regulation Voltage adjustability Ripple and noise Positive logic DC-DC ON (Standard) DC-DC OFF Negative logic DC-DC ON (Option) DC-DC OFF Input current of Ctrl pin Remote off input current Conditions Low Line to High Line at Full Load No Load to Full Load Asymmetrical load 25%/100% FL Single output Measured by 20MHz bandwidth With a 0.1µF/50V MLCC Over load protection Short circuit protection 1 minute Isolation resistance Isolation capacitance Switching frequency Safety approvals 500VDC Single -0.5 mAp-p ms 36 50 100 L-C type Open or 3 ~ 12VDC Short or 0 ~ 1.2VDC Short or 0 ~ 1.2VDC Open or 3 ~ 12VDC +0.5 2.5 Typ. mA mA Unit +1.0 +0.2 +0.5 +5.0 +10 % % % % % mVp-p +0.02 250 3.9 3.9 3.9 3.9 6.2 15 18 1.5Vout 1.8Vout 2.5Vout 3.3Vout 5Vout 12Vout 15Vout VDC Max. 60 75 100 Others 5Vout, 12Vout, 15Vout All %/ µs VDC 150 % Continuous, automatics recovery Conditions Min. Input to Output Input(Output) to Case 1600 1600 1 450 MIL-HDBK-217F, Full load ENVIRONMENTAL SPECIFICATIONS Parameter Conditions Min. With derating Typ. Without heat-sink With heat-sink Max. Unit VDC GΩ pF 500 kHz UL60950-1 EN60950-1 IEC60950-1 Nickel-coated copper Non-conductive black plastic Epoxy (UL94 V-0) 27g (0.95oz) 1.583 x 106 hrs 1000 550 Typ. -40 Max. Unit +100 +100 +125 -55 Vertical direction by natural convection (20LFM) Thermal shock Vibration Relative humidity 2 VDC -1.0 -0.2 -0.5 -5.0 -10 % of Iout rated Isolation voltage Operating ambient temperature Maximum case temperature Storage temperature range Thermal impedance Unit 18 36 75 -0.02 25% load step change Zener diode clamp GENERAL SPECIFICATIONS Parameter Case material Base material Potting material Weight MTBF Max. 12 24 48 20 10 10 Min. Dual Dual Temperature coefficient Transient response recovery time Over voltage protection Typ. 9 18 36 Power up Remote ON/OFF 12Vin(nom) 24Vin(nom) 48Vin(nom) Referred to –Vin pin OUTPUT SPECIFICATIONS Parameter Min. 12 10 /W MIL-STD-810F MIL-STD-810F 5% to 95% RH www.PDUKE.com 2015/2/26 FED20 EMC SPECIFICATIONS Parameter EMI (2) ESD Radiated immunity Fast transient (3) Surge (3) Conducted immunity Conditions EN55022 EN61000-4-2 EN61000-4-3 EN61000-4-4 EN61000-4-5 EN61000-4-6 Level Class A, Class B Perf. Criteria B Perf. Criteria A Perf. Criteria A Perf. Criteria B Perf. Criteria A Air ± 8kV and Contact ± 6kV 10 V/m ± 2kV ± 1kV 10 Vr.m.s Note: 1. 2. 3. Test by minimum input and constant resistive load. The standard modules meet EN55022 Class A and Class B with external components. For further information, please contact with P-DUKE. An external input filter capacitor is required if the module has to meet EN61000-4-4, EN61000-4-5. The filter capacitor Power Mate suggest: Nippon chemi-con KY series, 220µF/100V. CAUTION: This power module is not internally fused. An input line fuse must always be used. CHARACTERISTIC CURVE FED20-48S05 Derating Curve FED20-48S05 Derating Curve With Heat-sink FED20-48S05 Efficiency vs. Input Voltage FED20-48S05 Efficiency vs. Output Load MECHANICAL DRAWING PIN CONNECTION PIN 1 2 3 4 5 6 SINGLE +Vin -Vin +Vout Trim -Vout Ctrl DUAL +Vin -Vin +Vout Common -Vout Ctrl EXTERNAL OUTPUT TRIMMING Output can be externally trimmed by using the method shown below. TRIM UP TRIM DOWN 5 4 RU 4 RD 3 1. All dimensions in inch (mm) 2. Tolerance :x.xx±0.02 (x.x±0.5) x.xxx±0.01 (x.xx±0.25) 3. Pin pitch tolerance ±0.01 (0.25) 4. Pin dimension tolerance ±0.004(0.1) 3 www.PDUKE.com 2015/2/26