LCD15 SERIES DC-DC CONVERTER 2:1 WIDE INPUT RANGE UP TO 15Watts FEATURES APPLICATIONS • NO MINIMUM LOAD REQUIRED • 1600VDC INPUT TO OUTPUT ISOLATION • SMALL SIZE AND LOW PROFILE： ：1.0 x 1.0 x 0.39 INCH • SIX-SIDED CONTINUOUS SHIELD • UL60950-1, EN60950-1, & IEC60950-1 SAFETY APPROVALS • CE MARKED • COMPLIANT TO RoHS II & REACH 1600VDC ISOLATION REMOTE CONTROL UVP OCP • WIRELESS NETWORK • TELECOM/DATACOM • INDUSTRY CONTROL SYSTEM • DISTRIBUTED POWER ARCHITECTURES • SEMICONDUCTOR EQUIPMENT SCP OVP TECHNICAL SPECIFICATION All specifications are typical at nominal input, full load and 25℃ otherwise noted Model Number LCD15-12S3P3 LCD15-12S05 LCD15-12S12 LCD15-12S15 LCD15-12S24 LCD15-12D05 LCD15-12D12 LCD15-12D15 LCD15-12D24 LCD15-24S3P3 LCD15-24S05 LCD15-24S12 LCD15-24S15 LCD15-24S24 LCD15-24D05 LCD15-24D12 LCD15-24D15 LCD15-24D24 LCD15-48S3P3 LCD15-48S05 LCD15-48S12 LCD15-48S15 LCD15-48S24 LCD15-48D05 LCD15-48D12 LCD15-48D15 LCD15-48D24 1 Input Range Output Voltage Output Current @Full Load Input Current @ No Load Efficiency Maximum Capacitor Load (1) VDC 9 ~ 18 9 ~ 18 9 ~ 18 9 ~ 18 9 ~ 18 9 ~ 18 9 ~ 18 9 ~ 18 9 ~ 18 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75 VDC 3.3 5 12 15 24 ±5 ±12 ±15 ±24 3.3 5 12 15 24 ±5 ±12 ±15 ±24 3.3 5 12 15 24 ±5 ±12 ±15 ±24 mA 4000 3000 1300 1000 625 ±1500 ±625 ±500 ±315 4000 3000 1300 1000 625 ±1500 ±625 ±500 ±315 4000 3000 1300 1000 625 ±1500 ±625 ±500 ±315 mA 120 90 30 30 12 30 30 30 17 50 65 20 20 10 15 15 25 12 25 35 12 12 10 12 15 20 10 % 84 88 86 88 90 85 87 88 90 86 88 87 88 90 85 88 88 90 86 88 88 88 91 85 89 88 91 µF 12000 6000 1000 660 200 ±3000 ±520 ±330 ±100 12000 6000 1000 660 200 ±3000 ±520 ±330 ±100 12000 6000 1000 660 200 ±3000 ±520 ±330 ±100 www.PDUKE.com 2015/05/05 LCD15 PART NUMBER STRUCTURE LCD15 - 48 Series Name Input Voltage (VDC) 12: 9~18 24: 18~36 48: 36~75 S Output Quantity S: Single D: Dual 05 - Output Voltage (VDC) 3P3: 3.3 05: 5 12: 12 15: 15 24: 24 05: ±5 12: ±12 15: ±15 24: ±24 NPUT SPECIFICATIONS Parameter : A: B: C: D: E: Input surge voltage 100ms, max. Min. Typ. Max. Unit 9 18 36 12 24 48 30 18 36 75 VDC 12Vin(nom) 24Vin(nom) 48Vin(nom) 12Vin(nom) 24Vin(nom) 48Vin(nom) Power up Remote ON/OFF 12Vin(nom) 24Vin(nom) 48Vin(nom) Referred to –Vin pin OUTPUT SPECIFICATIONS Parameter Load regulation No Load to Full Load Cross regulation Voltage adjustability (2) Asymmetrical load 25%/100% FL Single output Ripple and noise Measured by 20MHz bandwidth VDC 8 14.5 30.5 Conditions Low Line to High Line at Full Load mAp-p 9 18 36 Positive logic DC-DC ON (Option) DC-DC OFF Negative logic DC-DC ON (Standard) DC-DC OFF Input current of Ctrl pin Remote off input current Voltage accuracy Line regulation 2 : No Assembly Option HS: Heat-sink HC: Heat-sink & Clamp Nominal input and Full load Constant resistive load Over load protection Short circuit protection Assembly Option 12Vin(nom) 24Vin(nom) 48Vin(nom) Start up time Temperature coefficient Transient response recovery time Over voltage protection Option Conditions Shutdown voltage Input filter Remote ON/OFF HS Negative logic remote ON/OFF(Standard) Positive logic remote ON/OFF Without Ctrl pin Negative logic remote ON/OFF without Trim pin Without Ctrl & Trim pin Positive logic remote ON/OFF without Trim pin Operating input voltage range Input reflected ripple current Start-up voltage A 30 30 36 50 100 Pi type Open or 3 ~ 15VDC Short or 0 ~ 1.2VDC Short or 0 ~ 1.2VDC Open or 3 ~ 15VDC 1.0 2.5 -0.5 Min. Single Dual Single Dual Dual 24Vout Others VDC Typ. -1.0 -0.2 -0.5 -0.2 -1.0 -5.0 -10 -10 With a 1µF M/C X7R and a 10µF T/C With a 1µF M/C X7R and a 10µF T/C With a 6.8µF/50V X7R MLCC Single 3.3Vout, 5Vout 12Vout,15Vout 24Vout 75 100 100 With a 4.7µF/50V X7R MLCC for each output With a 1µF M/C X7R and a 10µF T/C for each output Dual 24Vout others 100 100 -0.02 25% load step change % of Iout rated; Hiccup mode 3.7 5.6 13.5 16.8 29.1 VDC mA mA Max. Unit +1.0 +0.2 +0.5 +0.2 +1.0 +5.0 +20 +10 % % % % % mVp-p +0.02 250 3.3Vout 5Vout 12Vout 15Vout 24Vout ms 5.4 7.0 19.6 20.5 32.5 %/ µs VDC 150 % Continuous, automatics recovery www.PDUKE.com 2015/05/05 LCD15 GENERAL SPECIFICATIONS Parameter Isolation voltage 1 minute Isolation resistance Isolation capacitance Switching frequency Safety approvals 500VDC Conditions Min. Input to Output Input(Output) to Case Typ. Max. 1600 1000 1 360 Unit VDC GΩ pF kHz UL60950-1 EN60950-1 IEC60950-1 1000 440 400 Pending: LCD15-S24, LCD15-D24 Case material Base material Potting material Weight MTBF Nickel-coated copper FR4 PCB Epoxy (UL94 V-0) 15g (0.53oz) 1.600 x 106 hrs MIL-HDBK-217F, Full load ENVIRONMENTAL SPECIFICATIONS Parameter Conditions Operating ambient temperature Maximum case temperature Storage temperature range Thermal impedance Min. Without derating With derating Typ. -40 +60 Without heat-sink With heat-sink 18.2 15.8 /W Thermal shock Vibration Relative humidity MIL-STD-810F MIL-STD-810F 5% to 95% RH EMC SPECIFICATIONS Parameter EMI (3) ESD Radiated immunity Fast transient (4) Surge (4) Conducted immunity Unit +60 +105 105 +125 -55 Natural convection (20LFM) Max. Conditions EN55022 EN61000-4-2 EN61000-4-3 EN61000-4-4 EN61000-4-5 EN61000-4-6 Air ± 8kV and Contact ± 6kV 10 V/m ± 2kV ± 1kV 3 Vr.m.s Level Class A, Class B Perf. Criteria A Perf. Criteria A Perf. Criteria A Perf. Criteria A Perf. Criteria A Note: 1. 2. 3. 4. Test by minimum input and constant resistive load. Trimming allows the user to increase or decrease the output voltage set point of the module. This is accomplished by connecting an external resistor between the Trim pin and either +Vout pin or -Vout pin. The standard modules meet EN55022 Class A and Class B with external components. For further information, please contact with P-DUKE. An external input filter capacitor is required if the module has to meet EN61000-4-4, EN61000-4-5. The filter capacitor Power Mate suggest: Nippon chemi-con KY series, 220µF/100V. CAUTION: This power module is not internally fused. An input line fuse must always be used. 3 www.PDUKE.com 2015/05/05 LCD15 CHARACTERISTIC CURVE LCD15-48S05 Derating Curve LCD15-48S05 Derating Curve With Heat-sink LCD15-48S05 Efficiency vs. Input Voltage LCD15-48S05 Efficiency vs. Output Load MECHANICAL DRAWING PIN CONNECTION PIN 1 2 3 4 5 6 SINGLE +Vin -Vin Ctrl +Vout Trim -Vout DUAL +Vin -Vin Ctrl +Vout Common -Vout EXTERNAL OUTPUT TRIMMING Output can be externally trimmed by using the method shown below. TRIM UP TRIM DOWN 6 5 RU 5 RD 4 1. All dimensions in inch (mm) 2. Tolerance :x.xx±0.02 (x.x±0.5) x.xxx±0.01 (x.xx±0.25) 3. Pin pitch tolerance ±0.01 (0.25) 4. Pin dimension tolerance ±0.004(0.1) 4 www.PDUKE.com 2015/05/05