FKC05 FKC05W SERIES DC-DC CONVERTER 4:1 AND 2:1 WIDE INPUT RANGE UP TO 5 Watts FEATURES APPLICATIONS • NO MINIMUM LOAD REQUIRED • 1600VDC INPUT TO OUTPUT ISOLATION • STANDARD 1.25 X 0.80 X 0.40 INCH 24 PIN DIP AND SMD PACKAGE • UL60950-1, EN60950-1, & IEC60950-1 SAFETY APPROVALS • CE MARKED • COMPLIANT TO RoHS II & REACH 1600VDC ISOLATION OCP • WIRELESS NETWORK • TELECOM/DATACOM • INDUSTRY CONTROL SYSTEM • DISTRIBUTED POWER ARCHITECTURES • SEMICONDUCTOR EQUIPMENT SCP TECHNICAL SPECIFICATION All specifications are typical at nominal input, full load and 25 Model Number FKC05-12S33 FKC05-12S05 FKC05-12S12 FKC05-12S15 FKC05-12D05 FKC05-12D12 FKC05-12D15 FKC05-24S33 FKC05-24S05 FKC05-24S12 FKC05-24S15 FKC05-24D05 FKC05-24D12 FKC05-24D15 FKC05-48S33 FKC05-48S05 FKC05-48S12 FKC05-48S15 FKC05-48D05 FKC05-48D12 FKC05-48D15 Model Number FKC05-24S33W FKC05-24S05W FKC05-24S12W FKC05-24S15W FKC05-24D05W FKC05-24D12W FKC05-24D15W FKC05-48S33W FKC05-48S05W FKC05-48S12W FKC05-48S15W FKC05-48D05W FKC05-48D12W FKC05-48D15W 1 otherwise noted Input Range Output Voltage Output Current @Full Load Input Current @ No Load Efficiency Maximum Capacitor Load VDC 9 ~ 18 9 ~ 18 9 ~ 18 9 ~ 18 9 ~ 18 9 ~ 18 9 ~ 18 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75 VDC 3.3 5 12 15 ±5 ±12 ±15 3.3 5 12 15 ±5 ±12 ±15 3.3 5 12 15 ±5 ±12 ±15 mA 1000 1000 470 400 ±500 ±230 ±190 1000 1000 470 400 ±500 ±230 ±190 1000 1000 470 400 ±500 ±230 ±190 mA 10 10 10 10 15 20 15 10 15 15 15 15 20 20 10 10 10 10 10 5 10 % 76 78 82 81 78 81 84 75 77 81 81 80 84 81 74 77 82 81 78 82 83 µF 2200 1000 220 150 ±680 ±100 ±68 2200 1000 220 150 ±680 ±100 ±68 2200 1000 220 150 ±680 ±100 ±68 Input Range Output Voltage Output Current @Full Load Input Current @ No Load Efficiency Maximum Capacitor Load VDC 9 ~ 36 9 ~ 36 9 ~ 36 9 ~ 36 9 ~ 36 9 ~ 36 9 ~ 36 18 ~ 75 18 ~ 75 18 ~ 75 18 ~ 75 18 ~ 75 18 ~ 75 18 ~ 75 VDC 3.3 5 12 15 ±5 ±12 ±15 3.3 5 12 15 ±5 ±12 ±15 mA 1000 1000 470 400 ±500 ±230 ±190 1000 1000 470 400 ±500 ±230 ±190 mA 10 15 15 15 15 20 20 10 10 10 10 10 5 10 % 76 79 81 84 78 82 84 73 79 80 82 76 80 80 µF 2200 1000 220 150 ±680 ±100 ±68 2200 1000 220 150 ±680 ±100 ±68 www.PDUKE.com 2015/2/26 FKC05 FKC05W PART NUMBER STRUCTURE FKC05 - 48 Series Name Input Voltage (VDC) 12: 9~18 24:18~36 48:36~75 S 05 Output Quantity Output Voltage (VDC) 33: 3.3 05: 5 12:12 15:15 S:Single D: Dual FKC05 - 48 Series Name S Input Voltage (VDC) 24: 9~36 48:18~75 Output Quantity S:Single D: Dual - M1 SMD Input Range Operating Temp. Option Mounting Type Option 2:1 : Standard type -25~+85℃ With derating M1: -40~+85℃ Without derating : DIP type SMD: SMD type 05:± 5 12:±12 15:±15 05 W Output Voltage (VDC) 33: 3.3 05: 5 12:12 15:15 Input Range 4:1 SMD Mounting Type Option : Standard type -25~+85℃ With derating M2: -40~+85℃ With derating Conditions FKC05 FKC05W Start up time Input surge voltage : DIP type SMD: SMD type 05:± 5 12:±12 15:±15 INPUT SPECIFICATIONS Parameter Operating input voltage range M2 Operating Temp. Option Constant resistive load 100 ms, max. Min. Typ. Max. 12Vin(nom) 24Vin(nom) 48Vin(nom) 9 18 36 12 24 48 18 36 75 24Vin(nom) 48Vin(nom) Power up 12Vin(nom) 24Vin(nom) 48Vin(nom) 9 18 24 48 36 75 450 36 50 100 Input reflected ripple current Input filter 20 Cross regulation Ripple and noise Temperature coefficient Transient response recovery time Over load protection Short circuit protection 2 VDC ms VDC mAp-p Pi type OUTPUT SPECIFICATIONS Parameter Voltage accuracy Line regulation Load regulation Unit Conditions Low Line to High Line at Full Load No Load to Full Load Asymmetrical load 25%/100% FL 20MHz bandwidth 25% load step change % of Iout rated www.PDUKE.com Min. Single Dual Dual Typ. -1.0 -0.2 -0.5 -1.0 -5.0 Max. Unit +1.0 +0.2 +0.5 +1.0 +5.0 % % % % mVp-p -0.02 +0.02 %/ 200 µs 170 % Continuous, automatics recovery 50 2015/2/26 FKC05 FKC05W GENERAL SPECIFICATIONS Parameter Isolation voltage 1 minute Conditions DIP type SMD type Isolation resistance Isolation capacitance Switching frequency Safety approvals Case material Base material Potting material Weight MTBF 500VDC MIL-HDBK-217F Operating ambient temperature(1) Conditions Standard M1 Version M2 Version Maximum case temperature Min. With derating Without derating With derating Standard type M2 Version M1 Version Typ. Air ± 8kV and Contact ± 6kV 10 V/m ± 2kV ± 1kV 10 Vr.m.s Unit GΩ pF 300 kHz UL60950-1 EN60950-1 IEC60950-1 Nickel-coated copper Non-conductive black plastic Epoxy (UL94 V-0) 18g (0.62oz) 5.831 x 106 hrs 300 330 Typ. -25 -40 -40 Max. Unit +85 +85 +85 100 100 105 +125 /W MIL-STD-810F MIL-STD-810F 5% to 95% RH 20 Conditions EN55022 EN61000-4-2 EN61000-4-3 EN61000-4-4 EN61000-4-5 EN61000-4-6 Max. VDC -55 Natural convection EMC SPECIFICATIONS Parameter EMI(2) ESD Radiated immunity Fast transient (3) Surge (3) Conducted immunity 1600 1600 1600 1000 1 270 ENVIRONMENTAL SPECIFICATIONS Parameter Storage temperature range Thermal impedance Thermal shock Vibration Relative humidity Min. Input to Output Input (Output) to Case Input to Output Input (Output) to Case Level Class A，Class B Perf. Criteria A Perf. Criteria A Perf. Criteria B Perf. Criteria B Perf. Criteria A Note: 1. 2. 3. It’s higher efficiency for M1 version. Therefore, it can be operated in a more extensive temperature range than standard and M2 version. The standard modules meet EMI Class A or Class B with external components. For further information, please contact with P-DUKE. An external input filter capacitor is required if the module has to meet EN61000-4-4, EN61000-4-5. The filter Power Mate suggests: Nippon chemi-con KY series, 220µF/100V. CAUTION: This power module is not internally fused. An input line fuse must always be used. 3 www.PDUKE.com 2015/2/26 FKC05 FKC05W CHARACTERISTIC CURVE FKC05-48S05 Derating Curve FKC05-48S05-M1 Derating Curve FKC05-48S05 Efficiency vs. Input Voltage FKC05-48S05 Efficiency vs. Output Load MECHANICAL DRAWING DIP type PIN CONNECTION PIN SINGLE 2 -Vin 3 -Vin 9 10 11 DUAL -Vin -Vin NC Common NC/*No Pin NC -Vout PIN 23 22 16 15 14 SINGLE +Vin +Vin DUAL +Vin +Vin -Vout Common NC/*No Pin +Vout +Vout * There is no pin at Pin10 & Pin15 for FKC05-W DIP type. SMD type PIN CONNECTION PIN SINGLE 2 -Vin 3 -Vin 9 10 11 Others NC NC NC NC DUAL -Vin -Vin PIN 23 22 SINGLE +Vin +Vin DUAL +Vin +Vin Common NC -Vout NC 16 15 14 -Vout NC +Vout Common NC +Vout 1. All dimensions in inch (mm) 2. Tolerance :x.xx±0.02 (x.x±0.5) x.xxx±0.01 (x.xx±0.25) 3. Pin pitch tolerance ±0.01 (0.25) 4. Pin dimension tolerance ±0.004(0.1) 4 www.PDUKE.com 2015/2/26