PDS02 PDH02 SERIES DC-DC CONVERTER 2:1 WIDE INPUT RANGE UP TO 2Watts FEATURES APPLICATIONS • NO MINIMUM LOAD REQUIRED • UP TO 3000VDC INPUT TO OUTPUT ISOLATION • SMALL SIZE AND LOW PROFILE 0.74 X 0.50 X 0.33 INCH • LOW OUTPUT RIPPLE AND NOISE • UL60950-1, EN60950-1, & IEC60950-1 SAFETY APPROVALS • CE MARKED • COMPLIANT TO RoHS II & REACH • WIRELESS NETWORK • TELECOM/DATACOM • INDUSTRY CONTROL SYSTEM • DISTRIBUTED POWER ARCHITECTURES • SEMICONDUCTOR EQUIPMENT ： 3000VDC ISOLATION 1600VDC ISOLATION REMOTE CONTROL SCP TECHNICAL SPECIFICATION All specifications are typical at nominal input, full load and 25℃ otherwise noted Model Number PDS(H)02-05S3P3 PDS(H)02-05S05 PDS(H)02-05S09 PDS(H)02-05S12 PDS(H)02-05S15 PDS(H)02-05D05 PDS(H)02-05D12 PDS(H)02-05D15 PDS(H)02-12S3P3 PDS(H)02-12S05 PDS(H)02-12S09 PDS(H)02-12S12 PDS(H)02-12S15 PDS(H)02-12D05 PDS(H)02-12D12 PDS(H)02-12D15 PDS(H)02-24S3P3 PDS(H)02-24S05 PDS(H)02-24S09 PDS(H)02-24S12 PDS(H)02-24S15 PDS(H)02-24D05 PDS(H)02-24D12 PDS(H)02-24D15 PDS(H)02-48S3P3 PDS(H)02-48S05 PDS(H)02-48S09 PDS(H)02-48S12 PDS(H)02-48S15 PDS(H)02-48D05 PDS(H)02-48D12 PDS(H)02-48D15 1 Input Range Output Voltage Output Current @Full Load Input Current @ No Load Efficiency Maximum Capacitor Load VDC 4.5 ~ 9 4.5 ~ 9 4.5 ~ 9 4.5 ~ 9 4.5 ~ 9 4.5 ~ 9 4.5 ~ 9 4.5 ~ 9 9 ~ 18 9 ~ 18 9 ~ 18 9 ~ 18 9 ~ 18 9 ~ 18 9 ~ 18 9 ~ 18 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75 VDC 3.3 5 9 12 15 ±5 ±12 ±15 3.3 5 9 12 15 ±5 ±12 ±15 3.3 5 9 12 15 ±5 ±12 ±15 3.3 5 9 12 15 ±5 ±12 ±15 mA 500 400 222 167 134 ±200 ±83 ±67 500 400 222 167 134 ±200 ±83 ±67 500 400 222 167 134 ±200 ±83 ±67 500 400 222 167 134 ±200 ±83 ±67 mA 35 35 40 35 40 40 40 40 20 20 20 20 20 25 25 25 10 10 10 10 10 10 10 10 7 7 7 7 7 7 7 7 % 74 80 79 81 83 78 81 82 75 81 79 81 84 78 83 82 75 81 79 84 84 79 84 84 75 81 79 82 82 78 83 83 µF 3300 1680 1000 820 680 ±1000 ±470 ±330 3300 1680 1000 820 680 ±1000 ±470 ±330 3300 1680 1000 820 680 ±1000 ±470 ±330 3300 1680 1000 820 680 ±1000 ±470 ±330 www.PDUKE.com 2014/04/30 PDS02 PDH02 PART NUMBER STRUCTURE PDS02 - 48 Series Name PDS: SMD type PDH: DIP type S Input Voltage (VDC) 05: 4.5~9 12:9~18 24:18~36 48:36~75 Output Quantity S:Single D: Dual 05 H Output Isolation Voltage Option (VDC) 3P3: 3.3 : Standard type 05: 5 1600VDC isolation 09: 9 H: 3000VDC isolation 12:12 15:15 05:± 5 12:±12 15:±15 INPUT SPECIFICATIONS Parameter Conditions Operating input voltage range Start up time Constant resistive load Input surge voltage 1 second, max. 05Vin(nom) 12Vin(nom) 24Vin(nom) 48Vin(nom) Power up Remote ON/OFF 05Vin(nom) 12Vin(nom) 24Vin(nom) 48Vin(nom) 05Vin(nom) 12Vin(nom) 24Vin(nom) 48Vin(nom) Input reflected ripple current Input filter Remote ON/OFF Application circuit DC-DC ON OUTPUT SPECIFICATIONS Parameter Voltage accuracy Line regulation Conditions Low Line to High Line at Full Load No Load to Full Load 10% Load to 100% Full Load 2 Max. Unit 5 12 24 48 5 5 9 18 36 75 VDC ms 2 VDC 80 40 mAp-p 30 20 Capacitor type Open or high impedance 3 4 mA 2.5 mA DC-DC OFF Load regulation Cross regulation Ripple and noise Temperature coefficient Transient response recovery time Short circuit protection Typ. 4.5 9 18 36 15 25 50 100 DC-DC ON DC-DC OFF Remote off input current Ctrl pin applied current via 1kΩ Min. Asymmetrical load 25%/100% FL 20MHz bandwidth 25% load step change www.PDUKE.com Min. Single Dual Single Dual Dual Typ. -1.0 -0.2 -1.0 -1.0 -0.5 -0.8 -5.0 Max. Unit +1.0 +0.2 +1.0 +1.0 +0.5 +0.8 +5.0 % % % % % mVp-p -0.02 +0.02 %/ 250 µs Continuous, automatics recovery 30 ℃ 2014/04/30 PDS02 PDH02 GENERAL SPECIFICATIONS Parameter Conditions Isolation voltage 1 minute Isolation resistance Isolation capacitance 500VDC Switching frequency Safety approvals Full load to minimum load Weight MTBF Input to Output Min. Standard Type Suffix ”H” Typ. Max. VDC GΩ Standard Type Suffix ”H” 50 50 100 Conditions Operating ambient temperature Storage temperature range Thermal shock Vibration Relative humidity Lead-free reflow solder process Moisture sensitivity level MSL EMC SPECIFICATIONS Parameter EMI(1) ESD Radiated immunity Fast transient (2) Surge (2) Conducted immunity Min. Without derating With derating Conditions EN55022 EN61000-4-2 EN61000-4-3 EN61000-4-4 EN61000-4-5 EN61000-4-6 Air ± 8kV and Contact ± 6kV 10 V/m ± 2kV ±1kV 10 Vr.m.s -40 +85 -55 pF kHz UL60950-1 EN60950-1 IEC60950-1 4.5g (0.16oz) 7.137 x 106 hrs MIL-HDBK-217F ENVIRONMENTAL SPECIFICATIONS Parameter Unit 1600 3000 1 Typ. Max. Unit ℃ ℃ +85 +100 +125 MIL-STD-810F MIL-STD-810F 5% to 95% RH IPC J-STD-020D IPC J-STD-033B Level 2a Level ， Class A Class B Perf. Criteria A Perf. Criteria A Perf. Criteria A Perf. Criteria A Perf. Criteria A Note: 1. 2. The standard modules meet EMI Class A or Class B with external components. For further information, please contact with P-DUKE. An external input filter capacitor is required if the module has to meet EN61000-4-4, EN61000-4-5. The filter capacitor Power Mate suggest: Nippon chemi-con KY series, 220µF/100V. CAUTION: This power module is not internally fused. An input line fuse must always be used. CHARACTERISTIC CURVE PDS02-48S05 Derating Curve 3 PDS02-48S05 Efficiency vs. Input Voltage www.PDUKE.com PDS02-48S05 Efficiency vs. Output Load 2014/04/30 PDS02 PDH02 MECHANICAL DRAWING PDS02 PIN CONNECTION PIN SINGLE 1 -Vin 2 Ctrl 6 NC 7 NC 8 +Vout 9 -Vout 14 +Vin DUAL -Vin Ctrl Common -Vout +Vout Common +Vin 1. All dimensions in inch (mm) 2. Tolerance :x.xx±0.02 (x.x±0.5) x.xxx±0.01 (x.xx±0.25) 3. Pin pitch tolerance ±0.01 (0.25) 4. Pin dimension tolerance ±0.004(0.1) PDH02 4 www.PDUKE.com 2014/04/30