PFKC05 PFKC05 SERIES DC-DC CONVERTER 2:1 WIDE INPUT RANGE UP TO 5Watts FEATURES APPLICATIONS • 1600VDC INPUT TO OUTPUT ISOLATION AND 3000VDC FOR OPTION • STANDARD 1.25 X 0.80 X 0.40 INCH • STANDARD 24 PIN DIP PACKAGE & SMD TYPE PACKAGE • UL60950-1, EN60950-1, & IEC60950-1 SAFETY APPROVALS • CE MARKED • COMPLIANT TO RoHS II & REACH 3000VDC ISOLATION 1600VDC ISOLATION OCP • WIRELESS NETWORK • TELECOM/DATACOM • INDUSTRY CONTROL SYSTEM • DISTRIBUTED POWER ARCHITECTURES • SEMICONDUCTOR EQUIPMENT SCP TECHNICAL SPECIFICATION All specifications are typical at nominal input, full load and 25 Model Number Input Range Output Voltage VDC VDC 9 ~ 18 9 ~ 18 9 ~ 18 9 ~ 18 9 ~ 18 9 ~ 18 9 ~ 18 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75 3.3 5 12 15 ±5 ±12 ±15 3.3 5 12 15 ±5 ±12 ±15 3.3 5 12 15 ±5 ±12 ±15 PFKC05-12S33 PFKC05-12S05 PFKC05-12S12 PFKC05-12S15 PFKC05-12D05 PFKC05-12D12 PFKC05-12D15 PFKC05-24S33 PFKC05-24S05 PFKC05-24S12 PFKC05-24S15 PFKC05-24D05 PFKC05-24D12 PFKC05-24D15 PFKC05-48S33 PFKC05-48S05 PFKC05-48S12 PFKC05-48S15 PFKC05-48D05 PFKC05-48D12 PFKC05-48D15 Output Current @Full Load Min. Load (1) mA 100 100 47 40 ±50 ±20 ±19 100 100 47 40 ±50 ±23 ±19 100 100 47 40 ±50 ±23 ±19 Full Load mA 1000 1000 470 400 ± 500 ± 230 ± 190 1000 1000 470 400 ± 500 ± 230 ± 190 1000 1000 470 400 ± 500 ± 230 ± 190 otherwise noted Input Current @ No Load Efficiency Maximum Capacitor Load (2) mA % µF 25 10 30 20 20 50 30 15 10 10 10 10 40 10 5 5 5 5 10 10 10 72 76 80 80 77 80 80 72 79 81 81 78 81 81 73 78 81 81 77 81 81 2200 1000 220 150 ± 680 ± 100 ± 68 2200 1000 220 150 ± 680 ± 100 ± 68 2200 1000 220 150 ± 680 ± 100 ± 68 PART NUMBER STRUCTURE PFKC05 Series Name 48 Input Voltage (VDC) 12: 9~18 24: 18~36 48: 36~75 S Output Quantity S: Single D: Dual 1 05 H Output Voltage (VDC) 33: 3.3 05: 5 12: 12 15: 15 05: ±5 12: ±12 15: ±15 Isolation Voltage (VDC) : 1600 H: 3000 - www.PDUKE.com SMD Package : DIP Type SMD: SMD Type 2015/2/26 PFKC05 INPUT SPECIFICATIONS Parameter Conditions 12Vin(nom) 24Vin(nom) 48Vin(nom) Operating input voltage range Input reflected ripple current Start up time Input surge voltage Nominal input and Full load Constant resistive load 100 ms, max. Min. Typ. Max. Unit 9 18 36 12 24 48 150 18 36 75 VDC Power up 12Vin(nom) 24Vin(nom) 48Vin(nom) 30 36 50 100 Pi type Input filter OUTPUT SPECIFICATIONS Parameter Conditions Voltage accuracy Line regulation Load regulation Low Line to High Line at Full Load Min. Load to Full Load Cross regulation Ripple and noise Asymmetrical load 25%/100% FL Measured by 20MHz bandwidth Temperature coefficient Transient response recovery time Short circuit protection Single Dual Dual 3.3Vout, 5Vout 12Vout 15Vout VDC Max. Unit +1.0 +0.2 +0.5 +2.0 +5.0 % % 75 120 150 % % mVp-p -0.02 Isolation voltage 1 minute Isolation resistance Isolation capacitance Switching frequency Safety approvals 500VDC +0.02 %/ 500 µs Continuous, automatics recovery Conditions Min. Input to Output Standard Suffix “ H ” 1600 3000 1 Typ. Max. Unit VDC GΩ pF kHz UL60950-1 EN60950-1 IEC60950-1 Non-conductive black plastic Non-conductive black plastic Epoxy (UL94 V-0) 14g (0.48oz) 15g (0.52oz) 5.953 x 106 hrs 300 100 Case material Base material Potting material Weight DIP Type SMD Type MIL-HDBK-217F, Full load ENVIRONMENTAL SPECIFICATIONS Parameter Conditions Operating ambient temperature Storage temperature range Thermal shock Vibration Relative humidity Min. Without derating EMC SPECIFICATIONS Parameter EMI ESD Radiated immunity Fast transient (3) Surge (3) Conducted immunity Typ. -1.0 -0.2 -0.5 -2.0 -5.0 25% load step change GENERAL SPECIFICATIONS Parameter MTBF Min. mAp-p ms Conditions EN55022 EN61000-4-2 EN61000-4-3 EN61000-4-4 EN61000-4-5 EN61000-4-6 Air ± 8kV and Contact ± 6kV 10 V/m ± 2kV ± 1kV 10 Vr.m.s -25 -55 Typ. Max. Unit +71 +125 MIL-STD-810F MIL-STD-810F 5% to 95% RH Level Class A Perf. Criteria A Perf. Criteria A Perf. Criteria B Perf. Criteria B Perf. Criteria A Note: 1. 2. 3. The output requires a minimum loading on the output to maintain specified regulation. Operation under no-load condition will not damage these devices, however they may not meet all listed specification. Test by minimum input and constant resistive load. An external input filter capacitor is required if the module has to meet EN61000-4-4, EN61000-4-5. The filter capacitor Power Mate suggest: Nippon chemi-con KY series, 220µF/100V. CAUTION: This power module is not internally fused. An input line fuse must always be used. CHARACTERISTIC CURVE 2 www.PDUKE.com 2015/2/26 PFKC05 PFKC05-48S05 Derating Curve PFKC05-48S05 Efficiency vs. Input Voltage PFKC05-48S05 Efficiency vs. Output Load MECHANICAL DRAWING DIP TYPE DIP PIN CONNECTION PIN SINGLE 2 -Vin 3 -Vin 9 10 11 NC NC NC DUAL -Vin -Vin PIN 23 22 SINGLE +Vin +Vin DUAL +Vin +Vin Common NC -Vout 16 15 14 -Vout NC +Vout Common NC +Vout PIN 23 22 SINGLE +Vin +Vin DUAL +Vin +Vin 16 15 14 -Vout NC +Vout Common NC +Vout * NC：No Connection SMD TYPE SMD PIN CONNECTION DUAL PIN SINGLE 2 -Vin -Vin 3 -Vin -Vin 9 10 11 Others NC NC NC NC Common NC -Vout NC * NC：No Connection 1. All dimensions in inch (mm) 2. Tolerance :x.xx±0.02 (x.x±0.5) x.xxx±0.01 (x.xx±0.25) 3. Pin pitch tolerance ±0.01 (0.25) 4. Pin dimension tolerance ±0.004(0.1) 3 www.PDUKE.com 2015/2/26