MKC03 MKC03 SERIES DC-DC CONVERTER 2:1 WIDE INPUT RANGE UP TO 3Watts FEATURES APPLICATIONS • NO MINIMUM LOAD REQUIRED • 500VDC INPUT TO OUTPUT ISOLATION • STANDARD 1.25 X 0.80 X 0.40 INCH • FIVE-SIDED CONTINUOUS SHIELD • STANDARD 24 PIN DIP PACKAGE & SMD TYPE PACKAGE • UL60950-1, EN60950-1, & IEC60950-1 SAFETY APPROVALS • CE MARKED • COMPLIANT TO RoHS II & REACH 500VDC ISOLATION OCP • WIRELESS NETWORK • TELECOM/DATACOM • INDUSTRY CONTROL SYSTEM • DISTRIBUTED POWER ARCHITECTURES • SEMICONDUCTOR EQUIPMENT SCP TECHNICAL SPECIFICATION All specifications are typical at nominal input, full load and 25℃ otherwise noted Model Number MKC03-12S33 MKC03-12S05 MKC03-12S12 MKC03-12S15 MKC03-12D05 MKC03-12D12 MKC03-12D15 MKC03-12DS05 MKC03-12DS12 MKC03-12DS15 MKC03-24S33 MKC03-24S05 MKC03-24S12 MKC03-24S15 MKC03-24D05 MKC03-24D12 MKC03-24D15 MKC03-24DS05 MKC03-24DS12 MKC03-24DS15 MKC03-48S33 MKC03-48S05 MKC03-48S12 MKC03-48S15 MKC03-48D05 MKC03-48D12 MKC03-48D15 MKC03-48DS05 MKC03-48DS12 MKC03-48DS15 1 Input Range Output Voltage Output Current @Full Load Input Current @ No Load Efficiency VDC 9 ~ 18 9 ~ 18 9 ~ 18 9 ~ 18 9 ~ 18 9 ~ 18 9 ~ 18 9 ~ 18 9 ~ 18 9 ~ 18 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75 VDC 3.3 5 12 15 ±5 ±12 ±15 +5 / +5 +12 / +12 +15 / +15 3.3 5 12 15 ±5 ±12 ±15 +5 / +5 +12 / +12 +15 / +15 3.3 5 12 15 ±5 ±12 ±15 +5 / +5 +12 / +12 +15 / +15 mA 500 500 250 200 ±250 ±125 ±100 250 / 250 125 / 125 100 / 100 500 500 250 200 ±250 ±125 ±100 250 / 250 125 / 125 100 / 100 500 500 250 200 ±250 ±125 ±100 250 / 250 125 / 125 100 / 100 mA 8 10 13 13 13 16 16 18 18 18 12 12 16 16 18 18 18 16 20 20 8 10 10 10 10 12 12 18 18 18 % 74 77 79 80 75 80 80 75 80 80 72 74 78 78 75 78 78 75 78 78 76 74 79 79 74 77 77 74 77 77 www.PDUKE.com Maximum Capacitor Load (1) µF 2200 1000 220 150 ± 470 ± 100 ± 68 470 / 470 100 / 100 68 / 68 2200 1000 220 150 ± 470 ± 100 ± 68 470 / 470 100 / 100 68 / 68 2200 1000 220 150 ± 470 ± 100 ± 68 470 / 470 100 / 100 68 / 68 2015/2/26 MKC03 PART NUMBER STRUCTURE MKC03 - 48 Series Name S Input Voltage (VDC) 12: 9~18 24: 18~36 48: 36~75 Output Quantity S: Single D: Dual DS: Dual Positive 05 Output Voltage (VDC) 33: 3.3 05: 5 12: 12 15: 15 05: ±5 12: ±12 15: ±15 05: 5 / 5 12: 12 / 12 15: 15 / 15 INPUT SPECIFICATIONS Parameter M1 SMD Version Code Package : Standard Version M1: M1 Version : DIP Type SMD: SMD Type Conditions 12Vin(nom) 24Vin(nom) 48Vin(nom) Operating input voltage range Input reflected ripple current Start up time Input surge voltage - Nominal input and Full load Constant resistive load 100 ms, max. Min. Typ. Max. Unit 9 18 36 12 24 48 20 18 36 75 VDC Power up 12Vin(nom) 24Vin(nom) 48Vin(nom) 350 36 50 100 Pi type Input filter OUTPUT SPECIFICATIONS Parameter Conditions Voltage accuracy Line regulation Load regulation Low Line to High Line at Full Load No Load to Full Load Cross regulation Ripple and noise Temperature coefficient Transient response recovery time Over load protection Short circuit protection Asymmetrical load 25%/100% FL Measured by 20MHz bandwidth Isolation resistance Isolation capacitance Switching frequency Safety approvals 1 minute Operating ambient temperature Maximum case temperature Storage temperature range Thermal impedance Thermal shock Vibration Relative humidity 2 Max. Unit +1.0 +0.2 +0.2 +1.0 +5.0 % % Max. Unit % % mVp-p -0.02 +0.02 %/ 200 µs 180 % Continuous, automatics recovery Conditions Min. Input to Output Input(Output) to Case V1out to V2out(Dual Positive) 500 500 500 1 270 DIP Type SMD Type MIL-HDBK-217F, Full load ENVIRONMENTAL SPECIFICATIONS Parameter Typ. -1.0 -0.2 -0.2 -1.0 -5.0 VDC 50 500VDC Case material Base material Potting material Weight MTBF Single Dual / Dual Positive Dual 25% load step change % of Iout rated GENERAL SPECIFICATIONS Parameter Isolation voltage Min. mAp-p ms Conditions Standard M1 (2) Min. With derating Without derating Typ. VDC GΩ pF 300 kHz UL60950-1 EN60950-1 IEC60950-1 Nickel-coated copper Non-conductive black plastic Epoxy (UL94 V-0) 16g (0.55oz) 18g (0.62oz) 7.213 x 106 hrs 300 330 Typ. -25 -40 www.PDUKE.com Unit +85 +85 +100 +125 -55 Vertical direction by natural convection (20LFM) Max. 20 /W MIL-STD-810F MIL-STD-810F 5% to 95% RH 2015/2/26 MKC03 EMC SPECIFICATIONS Parameter EMI ESD Radiated immunity Fast transient (3) Surge (3) Conducted immunity Conditions EN55022 EN61000-4-2 EN61000-4-3 EN61000-4-4 EN61000-4-5 EN61000-4-6 Level Class A Perf. Criteria A Perf. Criteria A Perf. Criteria B Perf. Criteria B Perf. Criteria A Air ± 8kV and Contact ± 6kV 10 V/m ± 2kV ± 1kV 10 Vr.m.s Note: 1. 2. 3. Test by minimum input and constant resistive load. M1 version is more efficient, therefore, it can be operated in a more extensive temperature range than standard. An external input filter capacitor is required if the module has to meet EN61000-4-4, EN61000-4-5. The filter capacitor Power Mate suggest: Nippon chemi-con KY series, 220µF/100V. CAUTION: This power module is not internally fused. An input line fuse must always be used. CHARACTERISTIC CURVE MKC03-48S05 Derating Curve MKC03-48S05 Efficiency vs. Input Voltage MKC03-48S05 Efficiency vs. Output Load MECHANICAL DRAWING DIP TYPE DIP PIN CONNECTION DUAL PIN SINGLE +Vin 1 +Vin -Vout 2 NC Common 3 NC Common 10 -Vout +Vout 11 +Vout -Vin 12 -Vin DS +Vin -V1out +V1out -V2out +V2out -Vin PIN 24 23 22 15 14 13 SINGLE +Vin NC NC -Vout +Vout -Vin DUAL +Vin -Vout Common Common +Vout -Vin DS +Vin -V1out +V1out -V2out +V2out -Vin DS +Vin -V1out +V1out -V2out +V2out -Vin NC PIN 24 23 22 15 14 13 SINGLE +Vin NC NC -Vout +Vout -Vin DUAL +Vin -Vout Common Common +Vout -Vin DS +Vin -V1out +V1out -V2out +V2out -Vin * NC：No Connection SMD TYPE SMD PIN CONNECTION DUAL PIN SINGLE +Vin 1 +Vin -Vout 2 NC Common 3 NC Common 10 -Vout +Vout 11 +Vout -Vin 12 -Vin NC Others NC * NC：No Connection 1. All dimensions in inch (mm) 2. Tolerance :x.xx±0.02 (x.x±0.5) x.xxx±0.01 (x.xx±0.25) 3. Pin pitch tolerance ±0.01 (0.25) 4. Pin dimension tolerance ±0.004(0.1) 3 www.PDUKE.com 2015/2/26