PI6C49X0202 Low Skew, 1-To-2 LVCMOS / LVTTL Fanout Buffer Description Features The PI6C49X0202 is a low skew, 1-to-2 LVCMOS/LVTTL High Performance Fanout Buffer. The PI6C49X0202 has a single ended clock input. The single ended clock input accepts LVCMOS or LVTTL input levels. The PI6C49X0202 features a pair of LVCMOS/LVTTL outputs. Guaranteed output and part-topart skew characteristics make the PI6C49X0202 ideal for clock distribution applications demanding well defined performance and repeatibility. ÎÎ2 LVCMOS / LVTTL outputs ÎÎLVCMOS / LVTTL clock input accepts LVCMOS or LVTTL input levels ÎÎMaximum output frequency: 250MHz ÎÎOutput skew: 25ps (typical) ÎÎPart-to-part skew: 250ps (typical) ÎÎSmall 8 lead SOIC package saves board space ÎÎFull 3.3V, 2.5V operation modes ÎÎ-40°C to 85°C ambient operating temperature ÎÎLead-Free package fully RoHS compliant Block Diagram Pin Assignment Q0 CLK Q1 15-0055 1 VDDO 1 8 Q0 VDD 2 7 GND CLK 3 6 VDDO GND 4 5 Q1 www.pericom.com PI6C49X0202 RevC 04/29/15 PI6C49X0202 Low Skew, 1-To-2 LVCMOS / LVTTL Fanout Buffer Pin Descriptions Pin# Pin Name Pin Type Pin Description 1, 6 VDDO Power Output supply pins. 2 VDD Power Core supply pin. 3 CLK Input 4, 7 GND Power Power supply ground. 5 Q1 Output Single clock output. LVCMOS / LVTTL interface levels. 8 Q0 Output Single clock output. LVCMOS / LVTTL interface levels. Pulldown LVCMOS / LVTTL clock input. Note: Pulldown refer to internal input resistors, typical values in Pin Characteristics table. Pin Characteristics Symbol Parameter CN Capacitance 4 pF R PULLDOWN Input Pulldown Resistor 51 kΩ ROUT Output Impedance 15-0055 Test Conditions Min. 5 2 Typical 7 Max. 12 www.pericom.com Units Ω PI6C49X0202 RevC 04/29/15 PI6C49X0202 Low Skew, 1-To-2 LVCMOS / LVTTL Fanout Buffer Maximum Ratings (Above which useful life may be impaired. For user guidelines, not tested.) Maximum Supply Voltage, VDD, VDDO . . . . . . . . . . . . . . . . . . . 4.6V Inputs, VI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –0.5V to VDD +0.5V Output, VO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –0.5V to VDDO +0.5V Storage Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . -65°C to 150°C ESD Protection (HBM)..................................................... 2000V Note: Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These ratings are stress specifications only. Functional operation of product at these conditions or any conditions beyond those listed in the DC Characteristics or AC Characteristics is not implied. Exposure to absolute maximum rating conditions for extended periods may affect product reliability. POWER SUPPLY DC CHARACTERISTICS, TA = -40°C to 85°C Symbol Parameter VDD Core Supply Voltage VDDO Output Power Supply Voltage IDD Power Supply Current IDDO Output Supply Current Conditions Min. Typ. Max. 3.3V Operation 3.135 3.3 3.465 2.5V Operation 2.375 2.5 2.625 3.3V Supply 3.135 3.3 3.465 2.5V Supply 2.375 2.5 2.625 unloaded, 25MHz Units V V 5 mA 6.5 mA Note: Parameters measured up to fmax unless otherwise noted. 15-0055 3 www.pericom.com PI6C49X0202 RevC 04/29/15 PI6C49X0202 Low Skew, 1-To-2 LVCMOS / LVTTL Fanout Buffer LVCMOS / LVTTL DC CHARACTERISTICS, TA = -40°C to 85°C Symbol Parameter VIH Input High Voltage VIL Input Low Voltage IIH Input High Current IIL Input Low Current Output High Voltage VOH Output Low Voltage VOL 15-0055 Conditions Min. Typ. Max. VDD = 3.3V 2 VDD+0.3 VDD = 2.5V 1.7 VDD+0.3 VDD = 3.3V -0.3 0.8 VDD = 2.5V -0.3 0.8 VDD = VIN = 3.465V 100 VDD = VIN = 2.625V 80 Units V V μA VDD = 3.465V, VIN = 0V -5 VDD = 2.625V, VIN= 0V -5 VDDO = 3.3V IOH = -100μA 2.9 V VDDO = 2.5V IOH = -100μA 2.2 V VDDO = 3.3V IOL = 100μA 0.2 V VDDO = 2.5V IOL = 100μA 0.2 V 4 μA www.pericom.com PI6C49X0202 RevC 04/29/15 PI6C49X0202 Low Skew, 1-To-2 LVCMOS / LVTTL Fanout Buffer AC CHARACTERISTICS, VDD = 3.3V ± 5%, TA = -40°C to 85°C Symbol Parameter fMAX Output Frequency tpLH Propagation Delay, Low-to-High; NOTE 1 tsk(o) Output Skew; NOTE 2 25 80 ps tsk(pp) Part-to-Part Skew; NOTE 3 250 800 ps tR Output Rise Time NOTE 4 tF Output Fall Time NOTE 4 odc Output Duty Cycle NOTE 5 tjit Additive RMS Jitter Conditions Max. Units 4 4 250 MHz VDDO = 3.3V, ƒ≤ 250MHz 1.4 2.2 VDDO = 2.5V, ƒ≤ 250MHz 1.5 3.0 VDDO = 3.3V VDDO = 2.5V Min. Typ. 250 ns VDDO = 3.3V 100 300 400 VDDO = 2.5V 100 350 500 VDDO = 3.3V 100 300 400 VDDO = 2.5V 100 350 500 ps ps ƒ≤ 133MHz 48 52 % 133MHz < ƒ≤ 200MHz 47 53 % 200MHz < ƒ≤ 250MHz 47 53 % 156.25MHz (@12kHz to 20MHz) 0.1 ps 125MHz (@12kHz to 0.07 ps 20MHz) Parameters measured at f MAX unless otherwise noted. NOTE 1: Measured from VDD /2 of the input to VDDO /2 of the output. NOTE 2: Defined as skew between outputs at the same supply voltage and with equal load conditions. Measured at VDDO /2. NOTE 3: Defined as skew between outputs on different devices operating at the same supply voltages and with equal load conditions. Using the same type of inputs on each device, the outputs are measured at VDDO /2. NOTE 4: Defined from 20% to 80% NOTE 5: Measured at VDDO /2 15-0055 5 www.pericom.com PI6C49X0202 RevC 04/29/15 PI6C49X0202 Low Skew, 1-To-2 LVCMOS / LVTTL Fanout Buffer AC CHARACTERISTICS, VDD = 2.5V ± 5%, TA = -40°C to 85°C Symbol Parameter Conditions fMAX Output Frequency VDDO = 2.5V tpLH Propagation Delay, Low-to-High; NOTE 1 VDDO = 2.5V, ƒ≤ 250MHz tsk(o) Output Skew; NOTE 2 tsk(pp) Part-to-Part Skew; NOTE 3 tR Output Rise Time NOTE 4 VDDO = 2.5V tF Output Fall Time NOTE 4 VDDO = 2.5V odc Output Duty Cycle NOTE 5 tjit Min. Max. Units MHz 4 250 1.5 2.8 ns 25 75 ps 250 800 ps 100 350 500 ps 100 350 500 ps ƒ≤ 133MHz 48 52 % 133MHz < ƒ≤ 200MHz 47 53 % 200MHz < ƒ≤ 250MHz 42 58 % 156.25MHz (@12kHz to 20MHz) Additive RMS Jitter Typ. 0.1 ps 125MHz (@12kHz to 0.07 ps 20MHz) Parameters measured at f MAX unless otherwise noted. NOTE 1: Measured from VDD /2 of the input to VDDO /2 of the output. NOTE 2: Defined as skew between outputs at the same supply voltage and with equal load conditions. Measured at VDDO /2. NOTE 3: Defined as skew between outputs on different devices operating at the same supply voltages and with equal load conditions. Using the same type of inputs on each device, the outputs are measured at VDDO /2. NOTE 4: Defined from 20% to 80% NOTE 5: Measured at VDDO /2 AC Test Circuit Load [VDD - VDDO/2] [+VDDO/2] VDD VDDO Z = 50-Ohm GND Scope 50Ohm [-VDDO/2] 15-0055 6 www.pericom.com PI6C49X0202 RevC 04/29/15 PI6C49X0202 Low Skew, 1-To-2 LVCMOS / LVTTL Fanout Buffer Note: • For latest package info, please check: http://www.pericom.com/products/packaging/mechanicals.php Ordering Information(1-3) Ordering Code Package Code Package Description PI6C49X0202WIE W 8-pin, Pb-free & Green, SOIC PI6C49X0202WIEX W 8-pin, Pb-free & Green, SOIC, Tape & Reel Notes: 1. Thermal characteristics can be found on the company web site at www.pericom.com/packaging/ 2. E = Pb-free and Green 3. Adding an X suffix = Tape/Reel Pericom Semiconductor Corporation • 1-800-435-2336 • www.pericom.com 15-0055 All trademarks are property of their respective owners. 7 www.pericom.com PI6C49X0202 RevC 04/29/15