Bulletin 700-HNK Plug-in Timing Relays Overview/Product Selection Bulletin 700-HNK Table Of Contents • • • • • Product Selection . . . . . . Accessories . . . . . . . . . . . Specifications . . . . . . . . . Approximate Dimensions . . . . . . . . . . . The Ultra-Slim Timing Relay is The Smallest Relay Available It is Perfect for Converting 700-HK Relays Into a Timing Relay SPDT and DPST-NO Contact Output Socket Mounted Timing Range From 0.1 s…10 h 133 133 134 138 Bulletin 700-HNK Miniature Timer with Multiple Time Ranges Output Modes Sockets Outputs Timing Range 0.1 s…10 min. 700-HN121 SPDT ➊ On-Delay One Shot Repeat Cycle, OFF-start 0.1 min…10 h Repeat Cycle, ON-start 0.1 s…10 min. 700-HN122 DPST-NO ➋ 0.1 min…10 h Cat. No. 700-HNK SPDT, DPST-NO Input Voltage Cat. No. 12V DC 24V DC 24V AC 12V DC 24V DC 24V AC 12V DC 24V DC 24V AC 12V DC 24V DC 700-HNK41AZ12 700-HNK41AZ24 700-HNK41AA24 700-HNK41BZ12 700-HNK41BZ24 700-HNK41BA24 700-HNK42AZ12 700-HNK42AZ24 700-HNK42AA24 700-HNK42BZ12 700-HNK42BZ24 24V AC 700-HNK42BA24 Factorystocked Item ✔ ✔ ✔ ✔ ✔ ✔ ✔ ➊ 5-blade terminal type only. ➋ 6-blade terminal type only. General Timer Functions Run/Power Indicator (Green) (Lit: Power ON) Main Dial Set the desired time according to time range selectable by DIP switch Output Indicator (Orange) (Lit: Output ON) Accessories Pkg. Qty. Cat. No. Factory-stocked Item Screw Terminal Socket — Panel or DIN Rail Mounting 5-blade miniature socket for use with 1-pole, Type 700-HNK41 timers. Order must be for 10 sockets or multiples of 10. 10 700-HN121 ✔ Screw Terminal Socket – Panel or DIN Rail Mounting 8-blade miniature socket for use with 2-pole, Bulletin 700-HNK42 timers. This socket includes a retainer clip. Order must be for 10 sockets or multiples of 10. 10 700-HN122 ✔ Description Cat. No. 700-HN121 Cat. No. 700-HN122 Timing Relay, Socket, Retainer Clip Reference Chart Timer Type 700-HNC Socket Cat. No. 700-HN121 700-HN122 Retainer Clip Cat. No. Provided Provided 133 Bulletin 700-HNK Plug-in Timing Relays Specifications ➊ Ratings Item Pilot Duty Rating Rated supply voltage Pin type Operating mode Operating voltage range Power consumption Control outputs 120V AC Make 240V AC 120V AC Break 240V AC Hp at 240V AC Accuracy of operating time Setting error Reset time Influence of voltage Influence of temperature Insulation resistance Dielectric strength Vibration resistance Shock resistance Ambient temperature Ambient humidity Life expectancy Impulse withstand voltage Noise immunity Static immunity Enclosure rating Weight EMC Approved standards NEMA B300 24V AC; 12, 24V DC Plug-in ON-delay, One Shot, Repeat Cycle OFF start, or Repeat Cycle ON start selectable with DIP switch 85%…110% of rated supply voltage (12 VDC: 90%…110% of rated supply voltage) ➊ 24V AC:Relay ON:approx. 0.8 VA (at 24 VAC, 60 Hz) Relay OFF:0.5 VA (at 24V AC, 60 Hz) 12V DC:Relay ON:approx. 0.4 W (at 12V DC) Relay OFF:0.1 W (at 12V DC) 24V DC:Relay ON:approx. 0.5 W (at 24V DC) Relay OFF:0.2 W (at 24V DC) 5 A at 250V AC, resistive load (cosφ = 1) The minimum applicable load is 10 mA at 5 VDC (P reference value). Characteristics 30 A 15 A 3A 1.5 A 1/6 Hp ±1% FS max. (1 s range: +1%±10 ms max.) ±15%+50 ms FS max. Min. power-opening time: 12, 24V DC: 0.1 s max. (including halfway reset) 24V AC: 0.5 s max. (including halfway reset) ±2% FS max. ±2% FS max. 100 MΩ min. (at 500V DC) 2,000V AC, 50/60 Hz for 1 min. (between operating circuit and control output, or contacts of different poles) 1,000V AC, 50/60 Hz for 1 min. (between non-continuous contacts) Malfunction:10…55 Hz, 0.5 mm single amplitude Malfunction:100 m/s2 (approx. 10G) Operating:-10°C…50°C (with no icing) Storage:-25°C…65°C (with no icing) Operating:35%…85% Mechanical:10,000,000 operations min. (under no load at 1,800 operations/h) Electrical:100,000 operations min. (3 A at 250V AC, resistive load at 1,800 operations/h) Between power terminals: 1 kV ±1.5 kV, square-wave noise by noise simulator (pulse width: 100 ns/1 µs, 1-ns rise) Destruction:8 kV Malfunction:4 kV IP20 Approx. 18 g Emission Enclosure:EN55011 Group 1 class A Emission AC Mains:EN55011 Group 1 class A Immunity ESD:EN61000-4-2:4 kV contact discharge (level 2) 8 kV air discharge (level 3) Immunity RF-interference:ENV50140:10 V/m (amplitude modulated, 80 MHz…1GHz) (level 3) 10 V/m (pulse modulated, 900 MHz) Immunity Conducted Disturbance:ENV50141:10 V (0.15…80 MHz) (level 3) Immunity Burst:EN61000-4-4:2 kV power-line (level 3) 2 kV I/O signal-line (level 4) UL508, CSA 22.2 No. 14 Conforms to VDE 0435/P2021 (for built-in use) Conforms to EN50081-2, EN50082-2, ACA, CE-certified ➊ When using 700-HNK timer in any place where the ambient temperature is more than 50°C, supply 90%…110% of the rated voltages (12V DC: 95%…110% of the rated voltage). 134 Bulletin 700-HNK Plug-in Timing Relays Timing Charts Note: t: Set time Rt: Reset time Timing Chart Operating Mode 700-HNK41… t ON-Delay Power t Output 700-HNK42… Rt Rt t t Power (1-5) Power (1-8) Time limit contact NC (4-2) Time limit contact NO 4-3, 5-6 Time limit contact NO (4-3) Run/Power indicator (PW) Run/Power Indicator (PW) Output indicator (OUT) t Output Indicator (OUT) Rt t Interval Power t Output t Rt t Power (1-5) Power (1-8) Time limit contact NC (4-2) Time limit contact NO (4-3, 5-6) Time limit contact NO (4-3) Run/Power indicator (PW) Run/Power indicator (PW) Output indicator (OUT) t Output indicator (OUT) t Repeat Cycle OFF-Start Power t t t Output t t t t Power (1-5) Power (1-8) Time limit contact NC (4-3) Time limit contact NO (4-3, 5-6) Time limit contact NO (4-3) Run/Power indicator (PW) Run/Power indicator (PW) Output indicator (OUT) t t t Output indicator (OUT) t Repeat Cycle ON-Start Power t t t Output t t t t Power (1-5) Power (1-8) Time limit contact NC (4-2) Time limit contact NO (4-3, 5-6) Time limit contact NO (4-3) Run/Power indicator (PW) Run/Power indicator (PW) Output indicator (OUT) t t t Output indicator (OUT) Wiring Diagrams Cat. No. 700-HNK41... Timer circuit OUT PW Cat. No. 700-HNK42... Timer circuit OUT PW 135 Bulletin 700-HNK Plug-in Timing Relays Pulse Operation A pulse output for a certain period can be obtained with a random external input signal. Use the 700-HNK in interval mode as shown in the following timing chart. Power (3-8) External short circuit (1-4) External input (1-3) Timer circuit 50 ms min. Time limit contact NO (6-5) Run/Power indicator (PW) Output indicator (OUT) External input Note: 136 t: Set time Rt: Reset time Mode Terminals Pulse Operation Power supply between 3 and 8 Short-circuit between 4 and 1 Input signal between 3 and 1 Operating mode; One shot and all other modes Power supply between 1 and 8 Bulletin 700-HNK Plug-in Timing Relays DIP Switch Settings Time Ranges Cat. No. 700-HNK41AZ12 700-HNK41AZ24 700-HNK41AA24 700-HNK42AZ12 700-HNK42AZ24 700-HNK42AA24 700-HNK41BZ12 700-HNK41BZ24 700-HNK41BA24 700-HNK42BZ12 700-HNK42BZ24 700-HNK42BA24 Time Range Time Setting Range Setting Factory-Set 1s 0.1 s…1 s Yes 10 s 1 s…10 s No 1 min. 0.1 s…1 min. No 10 min. 1 min…10 min. No 1 min. 0.1 min…1 min. Yes 10 min. 1 min…10 min. No 1h 0.1 h…1 h No 10 h 1 h…10 h No Note: The left two DIP switch pins are used to select the time ranges. Operating Modes Operating Mode Setting Factory-set ON-delay Yes One Shot No Repeat Cycle OFF-start No Repeat Cycle ON-start No Note: The right two DIP switch pins are used to select the operating modes. 137 Bulletin 700-HNK Plug-in Timing Relays Approximate Dimensions Approximate Dimensions are shown in millimeters (inches). Approximate Dimensions are not intended to be used for manufacturing purposes. 47 (1.86) 46 (1.81) 12.8 (0.50) 47 (1.86) 46 (1.81) 12.8 (0.50) 6 (0.23) 28.8 31.2 (1.13) (1.22) 31.2 28.8 (1.22) (1.13) Bulletin 700-HNK41 SPDT Contact Approximate Dimensions Bulletin 700-HNK42 DPST-NO Contact Approximate Dimensions 30.5 ( 1-7/32) 30.5 ( 1-7/32) 7.11 (9/32) 11 4 +) 5(+ (A1)) 2.03 (5/64) Five M3.5 x 0.315 ➊ 3.0 Dia. Holes (1/8) Use M3 Screws 87.3 (3-14/32) 7.11 (9/32) 11 4 4.06 (5/32) 12 2 14 3 14 3 39.5 (1-17/32) 35.5 (1-13/32) +) 5(+ (A1)) 54.1 (2-1/8) 4.06 (5/32) ➊ 3.0 Dia. Holes (1/8) Use M3 Screws 87.3 (3-14/32) 39.5 (1-17/32) 35.5 (1-13/32) 1 (-1) (A2) 3.5 (4/32) 15.6 (5/8) 2.03 (5/64) Five M3.5 x 0.315 12 2 1 (-1) (A2) 3.5 (4/32) 138 6 (0.23) 15.6 (5/8) 60.0 (2-11/32) Cat. No. 700-HN121 Cat. No. 700-HN122 Wire Size: 2 x 2.5 mm2 Single Wire – Up to #12 AWG Double Wire – 2 x 2.5 mm2 (#2–14 AWG… #2–20 AWG) (Either Solid or Stranded) Strip Length: 9 mm (3/8 in.) – Torque: 0.8 N•m (7 lb.-in.) Wire Size: 2 x 2.5 mm2 Single Wire – Up to #12 AWG Double Wire – 2 x 2.5 mm2 (#2–14 AWG… #2–20 AWG) (Either Solid or Stranded) Strip Length: 9 mm (3/8i n.) – Torque: 0.8 N•m (7 lb.-in.) Total height: 700-HN121 + 700-HNK41 is 78.0 mm. Total height: 700-HN122 + 700-HNK42 is 78.0 mm. ➊ Holes required for mounting [3 mm (1/8 in.) diameter]. ➊ Holes required for mounting [3 mm (1/8 in.) diameter].