UB72110-0SS19 Ku-BAND BLOCK UP CONVERTER Features: General Information: The UB72110-0SS19 Ku-Band Block Up 13.75 to 14.50 GHz Coverage Converter was designed for use in commercial Lightweight ~1.0 pounds and military miniature SATCOM systems. Planar Package Intended for convenient systems integration, MIL-STD-188-168A Phase Noise the compact unit can be mounted for Internal Image Filtering maximum efficiency of operation in a customer Integral Monitor and Alarm supplied package. User Adjustable Gain 11615DS Rev B Americas Europe, Middle East & Africa (Head Office) CPI International Inc. CPI Cham, Switzerland Satcom Products T: +41 (41) 560 7550 Palo Alto, CA USA F: +41 (41) 560 7551 T: +1 (650) 846‐3803 CPI Europe, Limited F: +1 (650) 424‐1744 Surrey, England Asia Pacific CPI Asia, Inc. Singapore T: +65 6225 0011 F: +65 9620 5200 www.cpii.com T: +44 (1932) 256 930 [email protected] F: +44 (1932) 241 271 UB72110‐0SS19 Ku-Band Block Up Converter Electrical Characteristics Parameter Range Input Frequency Range Comments 950-1700 MHz Output Frequency Range 13.75-14.50 GHz Local Oscillator 12.800 GHz External Reference Frequency Phase Noise (SSB) Linear Gain 10.000 000 MHz 0 dBm ±5 dB 100 Hz -63 dBc/Hz 1 kHz -73 dBc/Hz 10 kHz -83 dBc/Hz 100 kHz -93 dBc/Hz 1 MHz -103 dBc/Hz Reference multiplexed on IF input 25dB (min) Gain Flatness ±0.75dB (max) per full band Gain Slope ±0.40dB (max) per 40 MHz Gain Stability vs temperature User Gain Adjustment Range P1dB ±1.5 dB (max) 31.5 dB in 0.5 dB steps Via RS-232 +10 dBm (min) Third Order Intermodulation Distortion -40 dBc max. 2 equal in-band signals each 6 dB below rated P1dB Noise Figure 12 dB (typ) Input VSWR 1.70 (typ), 2.00 (max) Output VSWR 1.25 (typ), 1.40 (max) Isolator Included Input Overdrive +0 max. non-damaging -60 dBc (max) within output band -50 dBm (max) outside of band Temp., Gain Adj., Lock Detect RS-232 serial I/O Spurious, Signal Related (@ rated P1dB) Spurious, Signal Independent (@ rated output) M&C Function Power Requirement Input Voltage +12 vdc ±5% Input Current .75 A (max) Mechanical Specifications Size (see outline drawing 11532) 4.18 x 3.50 x 1.00 in. Weight 1.0 lbs (nom) Finish Passivated aluminum LxWxH Connectors IF Input/ RF Output + 12 vdc input, M&C I/0 External Reference Input Type SMA (f) DB15 Type SMA (f) Environmental Operating Temperature Range Humidity -40° to +60°C 100% Specifications are subject to change at the discretion of CPI Locus Microwave, Inc. Non-condensation 11615DS Rev B 176 Technology Dr. Suite 200, Boalsburg, PA 16827 USA • Tel: +1 814 466 6275 • Fax: +1 814 466 1104 www.cpii.com