BVDSS = 100 V RDS(on) typ = 10 mΩ HRS120N10K ID = 73 A 100V N-Channel Trench MOSFET TO-220F FEATURES Originative New Design Superior Avalanche Rugged Technology Excellent Switching Characteristics 1 2 3 1.Gate 2. Drain 3. Source Unrivalled Gate Charge : 65 nC (Typ.) Extended Safe Operating Area Lower RDS(ON) : 10 mΩ (Typ.) @VGS=10V 100% Avalanche Tested Absolute Maximum Ratings Symbol VDSS TC=25℃ unless otherwise specified Parameter Drain-Source Voltage Value Units 100 V Drain Current – Continuous (TC = 25℃) 73 * A Drain Current – Continuous (TC = 100℃) 51 * A IDM Drain Current – Pulsed 200 * A VGS Gate-Source Voltage ±25 V EAS Single Pulsed Avalanche Energy (Note 2) 265 mJ EAR Repetitive Avalanche Energy (Note 1) 5 mJ PD Power Dissipation (TC = 25℃) - Derate above 25℃ 50 W TJ, TSTG Operating and Storage Temperature Range TL Maximum lead temperature for soldering purposes, 1/8” from case for 5 seconds ID (Note 1) 0.33 W/℃ -55 to +175 ℃ 300 ℃ * Drain current limited by maximum junction temperature Thermal Resistance Characteristics Typ. Max. RθJC Symbol Junction-to-Case Parameter -- 3.0 RθJA Junction-to-Ambient -- 62.5 Units ℃/W ◎ SEMIHOW REV.A0,December 2014 HRS120N10K December 2014 Symbol Parameter unless otherwise specified Test Conditions Min Typ Max Units On Characteristics VGS RDS(ON) gFS Gate Threshold Voltage VDS = VGS, ID = 250 ㎂ 2.0 -- 3.6 V Static Drain-Source On-Resistance VGS = 10 V, ID = 40 A -- 10 12 mΩ Forward Transconductance VDS = 20, ID = 40 A -- 70 -- S VGS = 0 V, ID = 250 ㎂ 100 -- -- V VDS = 80 V, VGS = 0 V -- -- 1 ㎂ VDS = 80 V, TJ = 125℃ -- -- 100 ㎂ VGS = ±25 V, VDS = 0 V -- -- ±100 ㎁ -- 3150 -- ㎊ -- 340 -- ㎊ -- 180 -- ㎊ -- 1.2 -- Ω -- 40 -- ㎱ -- 50 -- ㎱ -- 120 -- ㎱ -- 40 -- ㎱ -- 65 -- nC -- 12 -- nC -- 24 -- nC Off Characteristics BVDSS Drain-Source Breakdown Voltage IDSS Zero Gate Voltage Drain Current IGSS Gate-Body Leakage Current Dynamic Characteristics Ciss Input Capacitance Coss Output Capacitance Crss Reverse Transfer Capacitance Rg Gate Resistance VDS = 25 V, VGS = 0 V, f = 1.0 MHz VGS = 0 V, VDS = 0 V, f = 1MHz Switching Characteristics td(on) Turn-On Time tr Turn-On Rise Time td(off) Turn-Off Delay Time tf Turn-Off Fall Time Qg Total Gate Charge Qgs Gate-Source Charge Qgd Gate-Drain Charge VDS = 50 V, ID = 30 A, RG = 6 Ω VDS = 80 V, ID = 30 A, VGS = 10 V Source-Drain Diode Maximum Ratings and Characteristics IS Continuous Source-Drain Diode Forward Current -- -- 73 ISM Pulsed Source-Drain Diode Forward Current -- -- 200 VSD Source-Drain Diode Forward Voltage IS = 30 A, VGS = 0 V -- -- 1.3 V trr Reverse Recovery Time -- 50 -- ㎱ Qrr Reverse Recovery Charge IS = 30 A, VGS = 0 V diF/dt = 100 A/μs -- 80 -- nC A Notes : 1. Repetitive Rating : Pulse width limited by maximum junction temperature 2. L=1mH, IAS=20A, VDD=25V, RG=25Ω, Starting TJ =25°C ◎ SEMIHOW REV.A0,December 2014 HRS120N10K Electrical Characteristics TJ=25 °C HRS120N10K Typical Characteristics VGS 15 V 10 V 8V 7V 6V 5.5 V 5V Bottom : 4.5 V 100 102 ID, Drain Current [A] ID, Drain Current [A] Top : 10 175oC 25oC 1 * Notes : 1. VDS= 20V 2. 300us Pulse Test * Notes : 1. 300us Pulse Test 2. TC = 25oC 101 100 0.1 101 0 2 VDS, Drain-Source Voltage [V] Figure 1. On Region Characteristics 4 6 VGS, Gate-Source Voltage [V] 8 10 Figure 2. Transfer Characteristics 16 100 IDR, Reverse Drain Current [A] RDS(ON) [mΩ], Drain-Source On-Resistance VGS = 10V 14 12 10 10 175oC 25oC 1 * Notes : 1. VGS= 0V 2. 300us Pulse Test ∗ Note : TJ = 25oC 0.1 0.0 8 0 40 80 120 160 4000 Capacitances [pF] 1.2 1.6 2.0 Ciss 3000 2000 * Note ; 1. VGS = 0 V 2. f = 1 MHz Coss 1000 Crss 100 101 12 VGS, Gate-Source Voltage [V] Ciss = Cgs + Cgd (Cds = shorted) Coss = Cds + Cgd Crss = Cgd 0 10-1 0.8 Figure 4. Body Diode Forward Voltage Variation with Source Current and Temperature Figure 3. On Resistance Variation vs Drain Current and Gate Voltage 5000 0.4 VSD, Source-Drain Voltage [V] ID, Drain Current [A] 10 8 6 4 2 0 VDS = 80V ID = 30V 0 20 40 60 VDS, Drain-Source Voltage [V] QG, Total Gate Charge [nC] Figure 5. Capacitance Characteristics Figure 6. Gate Charge Characteristics 80 ◎ SEMIHOW REV.A0,December 2014 (continued) 2.5 RDS(ON), (Normalized) Drain-Source On-Resistance 1.2 BVDSS, (Normalized) Drain-Source Breakdown Voltage HRS120N10K Typical Characteristics 1.1 1.0 0.9 ∗ Note : 1. VGS = 0 V 2. ID = 250µA 0.8 -100 -50 0 50 100 150 2.0 1.5 1.0 ∗ Note : 1. VGS = 10 V 2. ID = 40 A 0.5 0.0 -100 200 -50 0 100 150 200 Figure 8. On-Resistance Variation vs Temperature Figure 7. Breakdown Voltage Variation vs Temperature 103 80 Operation in This Area is Limited by R DS(on) 100 µs 102 60 101 ID, Drain Current [A] 1 ms 10 ms 100 ms DC 100 * Notes : 1. TC = 25 oC 10-1 40 20 o 2. TJ = 175 C 3. Single Pulse 10-2 10-1 100 101 0 25 102 50 75 100 125 150 175 TC, Case Temperature [oC] VDS, Drain-Source Voltage [V] Figure 9. Maximum Safe Operating Area Figure 10. Maximum Drain Current vs Case Temperature D=0.5 ZθJC(t), Thermal Response ID, Drain Current [A] 50 TJ, Junction Temperature [oC] TJ, Junction Temperature [oC] 100 0.2 * Notes : 1. ZθJC(t) = 3.0 oC/W Max. 2. Duty Factor, D=t1/t2 3. TJM - TC = PDM * ZθJC(t) 0.1 0.05 10-1 PDM 0.02 0.01 t1 single pulse 10-2 10-5 10-4 10-3 10-2 10-1 t2 100 101 t1, Square Wave Pulse Duration [sec] Figure 11. Transient Thermal Response Curve ◎ SEMIHOW REV.A0,December 2014 HRS120N10K Fig 12. Gate Charge Test Circuit & Waveform 50KΩ 12V VGS Same Type as DUT Qg 200nF 10V 300nF VDS VGS Qgs Qgd DUT 3mA Charge Fig 13. Resistive Switching Test Circuit & Waveforms RL VDS VDS 90% VDD RG ( 0.5 rated VDS ) Vin DUT 10V 10% tr td(on) td(off) t on tf t off Fig 14. Unclamped Inductive Switching Test Circuit & Waveforms BVDSS 1 EAS = ---- LL IAS2 -------------------2 BVDSS -- VDD L VDS VDD ID BVDSS IAS RG 10V ID (t) DUT VDS (t) VDD tp Time ◎ SEMIHOW REV.A0,December 2014 HRS120N10K Fig 15. Peak Diode Recovery dv/dt Test Circuit & Waveforms DUT + VDS _ IS L Driver RG VGS VGS ( Driver ) Same Type as DUT VDD • dv/dt controlled by RG • IS controlled by pulse period Gate Pulse Width D = -------------------------Gate Pulse Period 10V IFM , Body Diode Forward Current IS ( DUT ) di/dt IRM Body Diode Reverse Current VDS ( DUT ) Body Diode Recovery dv/dt Vf VDD Body Diode Forward Voltage Drop ◎ SEMIHOW REV.A0,December 2014 HRS120N10K Package Dimension TO-220F ±0.20 ±0.20 .20 0 2.54±0.20 6.68±0.20 0.70±0.20 12.42±0.20 3.30±0.20 2.76±0.20 1.47max 9.75±0.20 15.87±0.20 φ 8± 1 . 3 0.80±0.20 0.50±0.20 2.54typ 2.54typ ◎ SEMIHOW REV.A0,December 2014