Project Number: Tracking Code: TC0917--2413_ReportRev2 Requested by: Jim Hahn Date: 5/6/2009 Part #: SEML-1XX-02-03.0-G-D-WT Lot #: 1 Part description: SEML/TEM Test Start: 01/23/2009 Product Rev: N/A Tech: Daniel Linton, Gary Lomax, Eng: Troy Cook & Rodney Riley Qty to test: 10 Test Completed: 4/23/2009 PART DESCRIPTION SEML-110-03.0-02-G-D-WT mated with TEM-110-03.0-02-G-D-WT SEML-125-03.0-02-G-D-WT mated with TEM-125-03.0-02-G-D-WT SEML-150-03.0-02-G-D-WT mated with TEM-150-03.0-02-G-D-WT Page 1 of 33 Tracking Code: TC0917-SEMX-2413 Part #: SEMX-125-02-03.0-G-D-WT Part description: SEML/TEM CERTIFICATION All instruments and measuring equipment were calibrated to National Institute for Standards and Technology (NIST) traceable standards according to IS0 10012-1 and ANSI/NCSL 2540-1, as applicable. All contents contained herein are the property of Samtec. No portion of this report, in part or in full shall be reproduced without prior written approval of Samtec. SCOPE To perform the following tests: Measure mating & unmating forces of 10, 25, & 50 position SEM/TEM and SEML/TEM at 1,2,3,4,5,6,7,8,9,10,15,20,25,50,100 cycles. APPLICABLE DOCUMENTS Standards: EIA Publication 364 TEST SAMPLES AND PREPARATION 1) 2) 3) 4) 5) All materials were manufactured in accordance with the applicable product specification. All test samples were identified and encoded to maintain traceability throughout the test sequences. After soldering, the parts to be used for LLCR and DWV/IR testing were cleaned according to TLWI-0001. Either an automated cleaning procedure or an ultrasonic cleaning procedure may be used. The automated procedure is used with aqueous compatible soldering materials. 6) 7) 8) 9) Parts not intended for testing LLCR and DWV/IR are visually inspected and cleaned if necessary. Any additional preparation will be noted in the individual test sequences. Solder Information: Lead Free Re-Flow Time/Temp: See accompanying profile. 10) Samtec Test PCBs used: PCB-100978-TST-XX Page 2 of 33 Tracking Code: TC0917-SEML-2413 Part #: SEML-1XX-02-03.0-G-D-WT Part description: SEML/TEM TYPICAL OVEN PROFILE (Soldering Parts to Test Boards) Page 3 of 33 Tracking Code: TC0917-SEML-2413 Part #: SEML-1XX-02-03.0-G-D-WT Part description: SEML/TEM FLOWCHARTS Mating/Unmating TEST STEP 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 GROUP A GROUP B GROUP C GROUP D GROUP e GROUP F 10 Boards 10 Boards SEM/TEM-25 Position 10 Boards SEML/TEM-25 Position 10 Boards SEM/TEM-50 Position 10 Boards SEML/TEM-50 Position Total Cycles SEM/TEM-10 Position 10 Boards SEML/TEM-10 Position Mating / Unmating Mating / Unmating Mating / Unmating Mating / Unmating Mating / Unmating Mating / Unmating Mating / Unmating Mating / Unmating Mating / Unmating Mating / Unmating Mating / Unmating Mating / Unmating Mating / Unmating Mating / Unmating Mating / Unmating Mating / Unmating Mating / Unmating Mating / Unmating Mating / Unmating Mating / Unmating Mating / Unmating Mating / Unmating Mating / Unmating Mating / Unmating Mating / Unmating Mating / Unmating Mating / Unmating Mating / Unmating Mating / Unmating Mating / Unmating Mating / Unmating Mating / Unmating Mating / Unmating Mating / Unmating Mating / Unmating Mating / Unmating Mating / Unmating Mating / Unmating Mating / Unmating Mating / Unmating Mating / Unmating Mating / Unmating Mating / Unmating Mating / Unmating Mating / Unmating Mating / Unmating Mating / Unmating Mating / Unmating Mating / Unmating Mating / Unmating Mating / Unmating Mating / Unmating Mating / Unmating Mating / Unmating Mating / Unmating Mating / Unmating Mating / Unmating Mating / Unmating Mating / Unmating Mating / Unmating 1 2 3 4 5 6 7 8 9 10 5 Cycles 5 Cycles 5 Cycles 5 Cycles 5 Cycles 5 Cycles Mating / Unmating Mating / Unmating Mating / Unmating Mating / Unmating Mating / Unmating Mating / Unmating 5 Cycles 5 Cycles 5 Cycles 5 Cycles 5 Cycles 5 Cycles Mating / Unmating Mating / Unmating Mating / Unmating Mating / Unmating Mating / Unmating Mating / Unmating 5 Cycles 5 Cycles 5 Cycles 5 Cycles 5 Cycles 5 Cycles Mating / Unmating Mating / Unmating Mating / Unmating Mating / Unmating Mating / Unmating Mating / Unmating 25 Cycles 25 Cycles 25 Cycles 25 Cycles 25 Cycles 25 Cycles Mating / Unmating Mating / Unmating Mating / Unmating Mating / Unmating Mating / Unmating Mating / Unmating 50 50 Cycles Mating / Unmating 50 Cycles Mating / Unmating 50 Cycles Mating / Unmating 50 Cycles Mating / Unmating 50 Cycles Mating / Unmating 50 Cycles Mating / Unmating 100 Mating/Un-Mating Forces = EIA-364-13 Page 4 of 33 15 20 25 Tracking Code: TC0917-SEML-2413 Part #: SEML-1XX-02-03.0-G-D-WT Part description: SEML/TEM ATTRIBUTE DEFINITIONS The following is a brief, simplified description of attributes. MATING/UNMATING: 1) Reference document: EIA-364-13, Mating and Unmating Forces Test Procedure for Electrical Connectors. 2) The full insertion position was to within 0.003” to 0.004” of the plug bottoming out in the receptacle to prevent damage to the system under test. 3) One of the mating parts is secured to a floating X-Y table to prevent damage during cycling. Page 5 of 33 Tracking Code: TC0917-SEML-2413 Part #: SEML-1XX-02-03.0-G-D-WT Part description: SEML/TEM RESULTS Mating/Unmating: All forces were measured in pounds of force. SEM/TEM (10 POSITON) Mating – Unmating Forces • After 1 Cycle o Mating Min --------------------------------------- 1.87 Max--------------------------------------- 2.17 o Unmating Min --------------------------------------- 1.05 Max--------------------------------------- 1.56 • After 2 Cycles o Mating Min --------------------------------------- 1.82 Max--------------------------------------- 2.15 o Unmating Min --------------------------------------- 1.09 Max--------------------------------------- 1.48 • After 3 Cycles o Mating Min --------------------------------------- 1.91 Max--------------------------------------- 2.18 o Unmating Min --------------------------------------- 1.08 Max--------------------------------------- 1.51 • After 4 Cycles o Mating Min --------------------------------------- 1.94 Max--------------------------------------- 2.17 o Unmating Min --------------------------------------- 1.09 Max--------------------------------------- 1.57 • After 5 Cycles o Mating Min --------------------------------------- 1.92 Max--------------------------------------- 2.16 o Unmating Min --------------------------------------- 1.08 Max--------------------------------------- 1.64 • After 6 Cycles o Mating Min --------------------------------------- 1.95 Max--------------------------------------- 2.15 o Unmating Min --------------------------------------- 1.11 Max--------------------------------------- 1.64 • After 7 Cycles o Mating Min --------------------------------------- 1.95 Max--------------------------------------- 2.16 o Unmating Min --------------------------------------- 1.11 Max--------------------------------------- 1.64 Page 6 of 33 Tracking Code: TC0917-SEML-2413 Part #: SEML-1XX-02-03.0-G-D-WT Part description: SEML/TEM • • • • • • • • After 8 Cycles o Mating Min --------------------------------------- 1.93 Max--------------------------------------- 2.18 o Unmating Min --------------------------------------- 1.12 Max--------------------------------------- 1.64 After 9 Cycles o Mating Min --------------------------------------- 1.92 Max--------------------------------------- 2.15 o Unmating Min --------------------------------------- 1.13 Max--------------------------------------- 1.65 After 10 Cycles o Mating Min --------------------------------------- 1.91 Max--------------------------------------- 2.15 o Unmating Min --------------------------------------- 1.12 Max--------------------------------------- 1.64 After 15 Cycles o Mating Min --------------------------------------- 1.84 Max--------------------------------------- 2.11 o Unmating Min --------------------------------------- 1.15 Max--------------------------------------- 1.66 After 20 Cycles o Mating Min --------------------------------------- 1.84 Max--------------------------------------- 2.09 o Unmating Min --------------------------------------- 1.19 Max--------------------------------------- 1.71 After 25 Cycles o Mating Min --------------------------------------- 1.90 Max--------------------------------------- 2.10 o Unmating Min --------------------------------------- 1.19 Max--------------------------------------- 1.71 After 50 Cycles o Mating Min --------------------------------------- 1.97 Max--------------------------------------- 2.17 o Unmating Min --------------------------------------- 1.27 Max--------------------------------------- 1.79 After 100 Cycles o Mating Min --------------------------------------- 2.09 Max--------------------------------------- 2.31 o Unmating Min --------------------------------------- 1.41 Max--------------------------------------- 1.93 Page 7 of 33 Tracking Code: TC0917-SEML-2413 Part #: SEML-1XX-02-03.0-G-D-WT Part description: SEML/TEM SEML/TEM (10 POSITION) Mating – Unmating Forces • After 1 Cycle o Mating Min --------------------------------------- 2.17 Max--------------------------------------- 3.64 o Unmating Min --------------------------------------- 2.25 Max--------------------------------------- 3.51 • After 2 Cycles o Mating Min --------------------------------------- 2.39 Max--------------------------------------- 3.64 o Unmating Min --------------------------------------- 2.50 Max--------------------------------------- 3.38 • After 3 Cycles o Mating Min --------------------------------------- 2.44 Max--------------------------------------- 3.68 o Unmating Min --------------------------------------- 2.55 Max--------------------------------------- 3.38 • After 4 Cycles o Mating Min --------------------------------------- 2.52 Max--------------------------------------- 3.69 o Unmating Min --------------------------------------- 2.59 Max--------------------------------------- 3.45 • After 5 Cycles o Mating Min --------------------------------------- 2.47 Max--------------------------------------- 3.90 o Unmating Min --------------------------------------- 2.59 Max--------------------------------------- 3.55 • After 6 Cycles o Mating Min --------------------------------------- 2.50 Max--------------------------------------- 3.89 o Unmating Min --------------------------------------- 2.60 Max--------------------------------------- 3.45 • After 7 Cycles o Mating Min --------------------------------------- 2.53 Max--------------------------------------- 3.93 o Unmating Min --------------------------------------- 2.58 Max--------------------------------------- 3.58 Page 8 of 33 Tracking Code: TC0917-SEML-2413 Part #: SEML-1XX-02-03.0-G-D-WT Part description: SEML/TEM • • • • • • • • After 8 Cycles o Mating Min --------------------------------------- 2.57 Max--------------------------------------- 3.93 o Unmating Min --------------------------------------- 2.61 Max--------------------------------------- 3.56 After 9 Cycles o Mating Min --------------------------------------- 2.58 Max--------------------------------------- 3.98 o Unmating Min --------------------------------------- 2.59 Max--------------------------------------- 3.57 After 10 Cycles o Mating Min --------------------------------------- 2.62 Max--------------------------------------- 3.96 o Unmating Min --------------------------------------- 2.57 Max--------------------------------------- 3.90 After 15 Cycles o Mating Min --------------------------------------- 2.57 Max--------------------------------------- 4.40 o Unmating Min --------------------------------------- 2.58 Max--------------------------------------- 3.68 After 20 Cycles o Mating Min --------------------------------------- 2.62 Max--------------------------------------- 4.25 o Unmating Min --------------------------------------- 2.63 Max--------------------------------------- 3.79 After 25 Cycles o Mating Min --------------------------------------- 2.62 Max--------------------------------------- 4.30 o Unmating Min --------------------------------------- 2.64 Max--------------------------------------- 3.80 After 50 Cycles o Mating Min --------------------------------------- 2.65 Max--------------------------------------- 4.34 o Unmating Min --------------------------------------- 2.71 Max--------------------------------------- 3.88 After 100 Cycles o Mating Min --------------------------------------- 2.62 Max--------------------------------------- 4.31 o Unmating Min --------------------------------------- 2.62 Max--------------------------------------- 3.82 Page 9 of 33 Tracking Code: TC0917-SEML-2413 Part #: SEML-1XX-02-03.0-G-D-WT Part description: SEML/TEM SEM/TEM (25 POSITION) Mating – Unmating Forces • After 1 Cycle o Mating Min --------------------------------------- 3.37 Max--------------------------------------- 4.82 o Unmating Min --------------------------------------- 2.39 Max--------------------------------------- 3.88 • After 2 Cycles o Mating Min --------------------------------------- 3.28 Max--------------------------------------- 4.79 o Unmating Min --------------------------------------- 2.54 Max--------------------------------------- 3.98 • After 3 Cycles o Mating Min --------------------------------------- 3.33 Max--------------------------------------- 4.85 o Unmating Min --------------------------------------- 2.50 Max--------------------------------------- 3.97 • After 4 Cycles o Mating Min --------------------------------------- 3.41 Max--------------------------------------- 4.74 o Unmating Min --------------------------------------- 2.48 Max--------------------------------------- 3.99 • After 5 Cycles o Mating Min --------------------------------------- 3.49 Max--------------------------------------- 5.04 o Unmating Min --------------------------------------- 2.49 Max--------------------------------------- 4.36 • After 6 Cycles o Mating Min --------------------------------------- 3.53 Max--------------------------------------- 4.87 o Unmating Min --------------------------------------- 2.48 Max--------------------------------------- 4.34 • After 7 Cycles o Mating Min --------------------------------------- 3.34 Max--------------------------------------- 4.83 o Unmating Min --------------------------------------- 2.62 Max--------------------------------------- 4.27 Page 10 of 33 Tracking Code: TC0917-SEML-2413 Part #: SEML-1XX-02-03.0-G-D-WT Part description: SEML/TEM • • • • • • • • After 8 Cycles o Mating Min --------------------------------------- 3.36 Max--------------------------------------- 4.66 o Unmating Min --------------------------------------- 2.63 Max--------------------------------------- 4.23 After 9 Cycles o Mating Min --------------------------------------- 3.36 Max--------------------------------------- 4.60 o Unmating Min --------------------------------------- 2.64 Max--------------------------------------- 4.21 After 10 Cycles o Mating Min --------------------------------------- 3.36 Max--------------------------------------- 4.60 o Unmating Min --------------------------------------- 2.63 Max--------------------------------------- 4.21 After 15 Cycles o Mating Min --------------------------------------- 3.40 Max--------------------------------------- 4.53 o Unmating Min --------------------------------------- 2.68 Max--------------------------------------- 4.23 After 20 Cycles o Mating Min --------------------------------------- 3.53 Max--------------------------------------- 4.60 o Unmating Min --------------------------------------- 2.47 Max--------------------------------------- 4.26 After 25 Cycles o Mating Min --------------------------------------- 3.50 Max--------------------------------------- 4.59 o Unmating Min --------------------------------------- 2.61 Max--------------------------------------- 4.27 After 50 Cycles o Mating Min --------------------------------------- 3.54 Max--------------------------------------- 4.91 o Unmating Min --------------------------------------- 2.78 Max--------------------------------------- 4.45 After 100 Cycles o Mating Min --------------------------------------- 3.79 Max--------------------------------------- 4.81 o Unmating Min --------------------------------------- 2.62 Max--------------------------------------- 4.76 Page 11 of 33 Tracking Code: TC0917-SEML-2413 Part #: SEML-1XX-02-03.0-G-D-WT Part description: SEML/TEM SEML/TEM (25 POSITION) Mating – Unmating Forces • After 1 Cycle o Mating Min --------------------------------------- 3.75 Max--------------------------------------- 7.88 o Unmating Min --------------------------------------- 4.05 Max--------------------------------------- 6.35 • After 2 Cycles o Mating Min --------------------------------------- 3.82 Max--------------------------------------- 7.79 o Unmating Min --------------------------------------- 4.08 Max--------------------------------------- 6.25 • After 3 Cycles o Mating Min --------------------------------------- 3.86 Max--------------------------------------- 6.64 o Unmating Min --------------------------------------- 4.13 Max--------------------------------------- 6.06 • After 4 Cycles o Mating Min --------------------------------------- 3.97 Max--------------------------------------- 6.31 o Unmating Min --------------------------------------- 4.08 Max--------------------------------------- 5.80 • After 5 Cycles o Mating Min --------------------------------------- 3.96 Max--------------------------------------- 5.94 o Unmating Min --------------------------------------- 4.04 Max--------------------------------------- 5.50 • After 6 Cycles o Mating Min --------------------------------------- 3.92 Max--------------------------------------- 5.74 o Unmating Min --------------------------------------- 4.01 Max--------------------------------------- 5.68 • After 7 Cycles o Mating Min --------------------------------------- 3.90 Max--------------------------------------- 5.62 o Unmating Min --------------------------------------- 3.92 Max--------------------------------------- 5.41 Page 12 of 33 Tracking Code: TC0917-SEML-2413 Part #: SEML-1XX-02-03.0-G-D-WT Part description: SEML/TEM • • • • • • • • After 8 Cycles o Mating Min --------------------------------------- 3.91 Max--------------------------------------- 5.26 o Unmating Min --------------------------------------- 3.92 Max--------------------------------------- 5.28 After 9 Cycles o Mating Min --------------------------------------- 3.93 Max--------------------------------------- 5.29 o Unmating Min --------------------------------------- 3.82 Max--------------------------------------- 5.22 After 10 Cycles o Mating Min --------------------------------------- 3.91 Max--------------------------------------- 5.16 o Unmating Min --------------------------------------- 3.78 Max--------------------------------------- 5.12 After 15 Cycles o Mating Min --------------------------------------- 3.96 Max--------------------------------------- 5.03 o Unmating Min --------------------------------------- 3.84 Max--------------------------------------- 5.13 After 20 Cycles o Mating Min --------------------------------------- 3.97 Max--------------------------------------- 5.15 o Unmating Min --------------------------------------- 3.93 Max--------------------------------------- 5.21 After 25 Cycles o Mating Min --------------------------------------- 4.01 Max--------------------------------------- 5.21 o Unmating Min --------------------------------------- 3.95 Max--------------------------------------- 5.27 After 50 Cycles o Mating Min --------------------------------------- 4.14 Max--------------------------------------- 5.44 o Unmating Min --------------------------------------- 3.87 Max--------------------------------------- 5.49 After 100 Cycles o Mating Min --------------------------------------- 4.34 Max--------------------------------------- 5.65 o Unmating Min --------------------------------------- 3.80 Max--------------------------------------- 5.74 Page 13 of 33 Tracking Code: TC0917-SEML-2413 Part #: SEML-1XX-02-03.0-G-D-WT Part description: SEML/TEM SEM/TEM (50 POSITION) Mating – Unmating Forces • After 1 Cycle o Mating Min --------------------------------------- 8.57 Max--------------------------------------- 9.50 o Unmating Min --------------------------------------- 5.56 Max--------------------------------------- 6.25 • After 2 Cycles o Mating Min --------------------------------------- 8.07 Max--------------------------------------- 9.11 o Unmating Min --------------------------------------- 5.52 Max--------------------------------------- 6.18 • After 3 Cycles o Mating Min --------------------------------------- 7.87 Max--------------------------------------- 8.91 o Unmating Min --------------------------------------- 5.53 Max--------------------------------------- 6.34 • After 4 Cycles o Mating Min --------------------------------------- 7.80 Max--------------------------------------- 8.83 o Unmating Min --------------------------------------- 5.52 Max--------------------------------------- 6.49 • After 5 Cycles o Mating Min --------------------------------------- 7.74 Max--------------------------------------- 8.90 o Unmating Min --------------------------------------- 7.74 Max--------------------------------------- 8.90 • After 6 Cycles o Mating Min --------------------------------------- 5.56 Max--------------------------------------- 6.58 o Unmating Min --------------------------------------- 7.65 Max--------------------------------------- 8.92 • After 7 Cycles o Mating Min --------------------------------------- 5.60 Max--------------------------------------- 6.55 o Unmating Min --------------------------------------- 7.69 Max--------------------------------------- 8.97 Page 14 of 33 Tracking Code: TC0917-SEML-2413 Part #: SEML-1XX-02-03.0-G-D-WT Part description: SEML/TEM • • • • • • • • After 8 Cycles o Mating Min --------------------------------------- 7.67 Max--------------------------------------- 8.98 o Unmating Min --------------------------------------- 5.67 Max--------------------------------------- 6.69 After 9 Cycles o Mating Min --------------------------------------- 7.68 Max--------------------------------------- 9.04 o Unmating Min --------------------------------------- 5.71 Max--------------------------------------- 6.70 After 10 Cycles o Mating Min --------------------------------------- 7.70 Max--------------------------------------- 9.04 o Unmating Min --------------------------------------- 5.74 Max--------------------------------------- 6.73 After 15 Cycles o Mating Min --------------------------------------- 7.73 Max--------------------------------------- 9.19 o Unmating Min --------------------------------------- 5.88 Max--------------------------------------- 7.12 After 20 Cycles o Mating Min --------------------------------------- 7.75 Max--------------------------------------- 9.30 o Unmating Min --------------------------------------- 5.98 Max--------------------------------------- 6.99 After 25 Cycles o Mating Min --------------------------------------- 7.72 Max--------------------------------------- 9.27 o Unmating Min --------------------------------------- 6.01 Max--------------------------------------- 7.12 After 50 Cycles o Mating Min --------------------------------------- 7.86 Max--------------------------------------- 9.41 o Unmating Min --------------------------------------- 6.17 Max--------------------------------------- 7.50 After 100 Cycles o Mating Min --------------------------------------- 8.01 Max--------------------------------------- 9.84 o Unmating Min --------------------------------------- 6.30 Max--------------------------------------- 8.38 Page 15 of 33 Tracking Code: TC0917-SEML-2413 Part #: SEML-1XX-02-03.0-G-D-WT Part description: SEML/TEM SEML/TEM (50 POSITION) Mating – Unmating Forces • After 1 Cycle o Mating Min --------------------------------------- 9.89 Max--------------------------------------12.47 o Unmating Min --------------------------------------- 9.50 Max--------------------------------------12.06 • After 2 Cycles o Mating Min --------------------------------------- 9.97 Max--------------------------------------13.38 o Unmating Min --------------------------------------- 9.89 Max--------------------------------------12.71 • After 3 Cycles o Mating Min --------------------------------------10.22 Max--------------------------------------13.68 o Unmating Min --------------------------------------- 9.97 Max--------------------------------------12.84 • After 4 Cycles o Mating Min --------------------------------------10.37 Max--------------------------------------13.75 o Unmating Min --------------------------------------- 9.96 Max--------------------------------------12.94 • After 5 Cycles o Mating Min --------------------------------------10.42 Max--------------------------------------13.79 o Unmating Min --------------------------------------- 9.85 Max--------------------------------------12.95 • After 6 Cycles o Mating Min --------------------------------------10.45 Max--------------------------------------13.91 o Unmating Min --------------------------------------- 9.87 Max--------------------------------------13.00 • After 7 Cycles o Mating Min --------------------------------------10.38 Max--------------------------------------13.86 o Unmating Min --------------------------------------- 9.83 Max--------------------------------------13.08 Page 16 of 33 Tracking Code: TC0917-SEML-2413 Part #: SEML-1XX-02-03.0-G-D-WT Part description: SEML/TEM • • • • • • • • After 8 Cycles o Mating Min --------------------------------------10.36 Max--------------------------------------13.92 o Unmating Min --------------------------------------- 9.78 Max--------------------------------------13.02 After 9 Cycles o Mating Min --------------------------------------10.32 Max--------------------------------------13.92 o Unmating Min --------------------------------------- 9.75 Max--------------------------------------13.07 After 10 Cycles o Mating Min --------------------------------------10.17 Max--------------------------------------13.91 o Unmating Min --------------------------------------- 9.69 Max--------------------------------------13.02 After 15 Cycles o Mating Min --------------------------------------10.12 Max--------------------------------------13.88 o Unmating Min --------------------------------------- 9.77 Max--------------------------------------13.10 After 20 Cycles o Mating Min --------------------------------------10.12 Max--------------------------------------13.98 o Unmating Min --------------------------------------- 9.79 Max--------------------------------------13.26 After 25 Cycles o Mating Min --------------------------------------10.13 Max--------------------------------------13.91 o Unmating Min --------------------------------------- 9.79 Max--------------------------------------13.35 After 50 Cycles o Mating Min --------------------------------------10.41 Max--------------------------------------14.61 o Unmating Min --------------------------------------10.22 Max--------------------------------------13.92 After 100 Cycles o Mating Min --------------------------------------10.78 Max--------------------------------------14.53 o Unmating Min --------------------------------------10.67 Max--------------------------------------14.41 Page 17 of 33 Tracking Code: TC0917-SEML-2413 Part #: SEML-1XX-02-03.0-G-D-WT Part description: SEML/TEM DATA SUMMARIES MATING/UNMATING: 10 POSITION Mating/Unmating Comparison 4.5 4.0 3.5 SEML Mating SEML Unmating SEM Mating SEM Unmating 2.5 2.0 1.5 1.0 0.5 Stress Page 18 of 33 C yc te le r1 s 00 C yc le s C yc le s Af te r5 0 Af le s C yc te r2 5 Af C yc le s te r2 0 Af C yc le s te r1 5 Af C yc le s te r1 0 Af C yc le s te r9 Af yc le s te r8 C Af C yc le s Af te r7 C yc le s Af te r6 C yc le s Af te r5 te r4 C yc le s Af C yc le s te r3 Af te r2 Af te r1 C yc le 0.0 Af Forces, lbs. 3.0 Tracking Code: TC0917-SEML-2413 Part #: SEML-1XX-02-03.0-G-D-WT Part description: SEML/TEM SEM/TEM (10 POSITION) Mating Minimum Maximum Average Minimum Average Minimum Average Force (Lbs) Force (Oz) Force (Lbs) Force (Oz) Force (Lbs) Force (Oz) Force (Lbs) 1.87 2.17 2.0 16.8 24.9 19.4 1.05 1.56 1.2 29.1 34.3 32.1 1.82 2.15 2.0 17.5 23.7 19.2 1.09 1.48 1.2 Minimum Average Average Force (Lbs) Force (Oz) Force (Lbs) Force (Oz) Force (Lbs) 30.6 34.8 32.6 1.91 2.18 2.0 17.2 24.2 19.4 1.08 1.51 1.2 31.1 34.7 32.8 1.94 2.17 2.0 17.4 25.1 19.6 1.09 1.57 1.2 Maximum Average Maximum Average Minimum Maximum Average Mating After 6 Cycles Unmating Force (Lbs) Force (Oz) Force (Lbs) Force (Oz) Force (Lbs) Force (Oz) Force (Lbs) 30.8 35.1 32.9 1.92 2.19 2.1 17.3 25.3 19.8 1.08 1.58 1.2 31.1 34.5 32.8 1.95 2.16 2.1 17.7 26.0 20.0 1.11 1.62 1.3 After 7 Cycles Unmating Mating After 8 Cycles Unmating Force (Oz) Force (Lbs) Force (Oz) Force (Lbs) Force (Oz) Force (Lbs) Force (Oz) Force (Lbs) 31.2 34.5 32.8 1.95 2.16 2.1 17.7 26.2 20.3 1.11 1.64 1.3 30.8 34.4 32.7 1.93 2.15 2.0 17.9 26.3 20.5 1.12 1.64 1.3 After 9 Cycles Unmating Force (Lbs) Force (Oz) Force (Lbs) 30.8 34.4 32.8 1.92 18.1 1.13 2.15 26.5 1.65 2.0 1.3 20.6 After 15 Cycles Mating Unmating Force (Lbs) Force (Oz) Force (Lbs) 29.4 33.8 31.9 1.84 18.3 1.15 2.11 26.6 1.66 2.0 1.3 21.1 After 25 Cycles Mating Unmating Force (Oz) Minimum After 5 Cycles Unmating Force (Oz) Force (Oz) Minimum After 4 Cycles Unmating Force (Oz) Force (Oz) Minimum Mating Force (Lbs) Mating Maximum After 3 Cycles Unmating Force (Oz) Mating Maximum After 2 Cycles Unmating 29.9 34.7 32.5 Mating Maximum Mating Force (Oz) Mating Maximum After 1 Cycle Unmating Force (Lbs) Force (Oz) Force (Lbs) 30.4 33.6 32.2 1.90 19.1 1.19 2.10 27.4 1.71 2.0 1.4 22.0 After 100 Cycles Mating Unmating Force (Oz) Force (Lbs) Force (Oz) Force (Lbs) 33.5 36.9 35.0 2.09 2.31 2.2 22.5 30.9 25.8 1.41 1.93 1.6 Page 19 of 33 Mating Force (Oz) 30.6 34.4 32.6 Force (Lbs) Force (Oz) Force (Lbs) 1.91 17.9 1.12 2.15 26.3 1.64 2.0 1.3 20.6 After 20 Cycles Mating Unmating Force (Oz) 29.4 33.4 31.9 After 10 Cycles Unmating Force (Lbs) Force (Oz) Force (Lbs) 1.84 19.1 1.19 2.09 27.4 1.71 2.0 1.4 21.7 After 50 Cycles Mating Unmating Force (Oz) Force (Lbs) Force (Oz) Force (Lbs) 31.6 34.8 33.1 1.97 2.17 2.1 20.4 28.6 23.6 1.27 1.79 1.5 Tracking Code: TC0917-SEML-2413 Part #: SEML-1XX-02-03.0-G-D-WT Part description: SEML/TEM DATA SUMMARIES Continued SEML/TEM (10 POSITION) Mating Minimum Maximum Average After 1 Cycle Unmating Mating Force (Oz) Force (Lbs) Force (Oz) Force (Lbs) Force (Oz) Force (Lbs) Force (Oz) Force (Lbs) 34.7 58.2 45.9 2.17 3.64 2.9 35.9 56.2 46.4 2.25 3.51 2.9 38.3 58.2 49.3 2.39 3.64 3.1 40.0 54.1 47.3 2.50 3.38 3.0 After 3 Cycles Mating Unmating Minimum Maximum Average Maximum Average Force (Lbs) Force (Oz) Force (Lbs) Force (Oz) Force (Lbs) Force (Oz) Force (Lbs) 39.1 58.9 50.5 2.44 3.68 3.2 40.9 54.1 48.0 2.55 3.38 3.0 40.3 59.0 51.4 2.52 3.69 3.2 41.4 55.2 48.3 2.59 3.45 3.0 Maximum Average Maximum Force (Oz) Force (Lbs) Force (Oz) Force (Lbs) Force (Oz) Force (Lbs) 2.47 3.90 3.3 41.5 56.8 48.5 2.59 3.55 3.0 40.0 62.2 52.4 2.50 3.89 3.3 41.5 56.6 48.6 2.60 3.54 3.0 Maximum Average Maximum Average Minimum Maximum Average Mating After 8 Cycles Unmating Force (Lbs) Force (Oz) Force (Lbs) Force (Oz) Force (Lbs) Force (Oz) Force (Lbs) 40.5 62.9 52.9 2.53 3.93 3.3 41.3 57.3 48.8 2.58 3.58 3.1 41.1 62.9 53.3 2.57 3.93 3.3 41.7 57.0 49.1 2.61 3.56 3.1 After 9 Cycles Unmating Force (Lbs) Force (Oz) Force (Lbs) 41.3 63.7 53.6 2.58 41.5 2.59 3.98 57.1 3.57 3.4 3.1 49.0 After 15 Cycles Mating Unmating Force (Lbs) Force (Oz) Force (Lbs) 41.1 70.4 56.0 2.57 41.2 2.58 4.40 58.9 3.68 3.5 3.2 50.4 After 25 Cycles Mating Unmating Force (Oz) Minimum After 7 Cycles Unmating Force (Oz) Force (Oz) Minimum After 6 Cycles Unmating Force (Lbs) Force (Oz) Average Mating 39.5 62.4 52.4 Mating Minimum After 5 Cycles Unmating Force (Oz) Mating Minimum Mating After 4 Cycles Unmating Force (Oz) Mating Minimum After 2 Cycles Unmating Force (Lbs) Force (Oz) Force (Lbs) 41.9 68.8 58.0 2.62 42.3 2.64 4.30 60.8 3.80 3.6 3.3 52.3 After 100 Cycles Mating Unmating Force (Oz) Force (Lbs) Force (Oz) Force (Lbs) 41.9 69.0 61.3 2.62 4.31 3.8 42.0 61.1 56.0 2.62 3.82 3.5 Page 20 of 33 Mating Force (Oz) 41.9 63.4 53.9 Force (Lbs) Force (Oz) Force (Lbs) 2.62 41.1 2.57 3.96 62.4 3.90 3.4 3.2 50.6 After 20 Cycles Mating Unmating Force (Oz) 41.9 68.0 57.1 After 10 Cycles Unmating Force (Lbs) Force (Oz) Force (Lbs) 2.62 42.1 2.63 4.25 60.6 3.79 3.6 3.2 51.4 After 50 Cycles Mating Unmating Force (Oz) Force (Lbs) Force (Oz) Force (Lbs) 42.4 69.4 60.2 2.65 4.34 3.8 43.3 62.1 54.6 2.71 3.88 3.4 Tracking Code: TC0917-SEML-2413 Part #: SEML-1XX-02-03.0-G-D-WT Part description: SEML/TEM DATA SUMMARIES Continued 25 POSITION Mating/Unmating Comparison 6.0 5.0 SEML Mating SEML Unmating SEM Mating SEM Unmating 3.0 2.0 1.0 Stress Page 21 of 33 50 C Af yc te le r1 s 00 C yc le s te r Af Af te r 25 C yc le s C yc le s le s Af te r 20 C yc le s C yc te r1 5 Af C yc le s te r1 0 Af C yc le s te r9 Af le s te r8 C yc Af C yc le s Af te r7 le s C yc Af te r6 C yc le s Af te r5 te r4 C yc le s Af C yc le s te r3 Af te r2 Af te r1 C yc le 0.0 Af Forces, lbs. 4.0 Tracking Code: TC0917-SEML-2413 Part #: SEML-1XX-02-03.0-G-D-WT Part description: SEML/TEM DATA SUMMARIES Continued SEM/TEM (25 POSITION) Mating Minimum Maximum Average After 1 Cycle Unmating Mating Force (Oz) Force (Lbs) Force (Oz) Force (Lbs) Force (Oz) Force (Lbs) Force (Oz) Force (Lbs) 53.9 77.1 65.0 3.37 4.82 4.1 38.2 62.1 50.2 2.39 3.88 3.1 52.5 76.6 65.0 3.28 4.79 4.1 40.6 63.7 51.0 2.54 3.98 3.2 After 3 Cycles Mating Unmating Minimum Maximum Average Maximum Average Force (Lbs) Force (Oz) Force (Lbs) Force (Oz) Force (Lbs) Force (Oz) Force (Lbs) 53.3 77.6 65.3 3.33 4.85 4.1 40.0 63.5 51.8 2.50 3.97 3.2 54.6 75.8 65.4 3.41 4.74 4.1 39.7 63.8 52.1 2.48 3.99 3.3 Maximum Average Maximum Force (Oz) Force (Lbs) Force (Oz) Force (Lbs) Force (Oz) Force (Lbs) 3.49 5.04 4.1 39.8 69.8 52.5 2.49 4.36 3.3 56.5 77.9 65.9 3.53 4.87 4.1 39.7 69.4 52.7 2.48 4.34 3.3 Maximum Average Maximum Average Minimum Maximum Average Mating After 8 Cycles Unmating Force (Lbs) Force (Oz) Force (Lbs) Force (Oz) Force (Lbs) Force (Oz) Force (Lbs) 53.4 77.3 65.4 3.34 4.83 4.1 41.9 68.3 52.7 2.62 4.27 3.3 53.8 74.6 65.1 3.36 4.66 4.1 42.1 67.7 52.7 2.63 4.23 3.3 After 9 Cycles Unmating Force (Lbs) Force (Oz) Force (Lbs) 53.8 73.6 64.6 3.36 42.2 2.64 4.60 67.4 4.21 4.0 3.3 52.9 After 15 Cycles Mating Unmating Force (Lbs) Force (Oz) Force (Lbs) 54.4 72.5 64.8 3.40 42.9 2.68 4.53 67.7 4.23 4.1 3.3 53.5 After 25 Cycles Mating Unmating Force (Oz) Minimum After 7 Cycles Unmating Force (Oz) Force (Oz) Minimum After 6 Cycles Unmating Force (Lbs) Force (Oz) Average Mating 55.8 80.6 66.0 Mating Minimum After 5 Cycles Unmating Force (Oz) Mating Minimum Mating After 4 Cycles Unmating Force (Oz) Mating Minimum After 2 Cycles Unmating Force (Lbs) Force (Oz) Force (Lbs) 56.0 73.4 64.4 3.50 41.8 2.61 4.59 68.3 4.27 4.0 3.4 54.4 After 100 Cycles Mating Unmating Force (Oz) Force (Lbs) Force (Oz) Force (Lbs) 60.6 77.0 68.1 3.79 4.81 4.3 41.9 76.2 56.8 2.62 4.76 3.6 Page 22 of 33 Mating Force (Oz) 53.8 73.6 64.6 Force (Lbs) Force (Oz) Force (Lbs) 3.36 42.1 2.63 4.60 67.4 4.21 4.0 3.3 52.9 After 20 Cycles Mating Unmating Force (Oz) 56.5 73.6 64.5 After 10 Cycles Unmating Force (Lbs) Force (Oz) Force (Lbs) 3.53 39.5 2.47 4.60 68.2 4.26 4.0 3.3 53.5 After 50 Cycles Mating Unmating Force (Oz) Force (Lbs) Force (Oz) Force (Lbs) 56.6 78.6 66.3 3.54 4.91 4.1 44.5 71.2 56.8 2.78 4.45 3.5 Tracking Code: TC0917-SEML-2413 Part #: SEML-1XX-02-03.0-G-D-WT Part description: SEML/TEM DATA SUMMARIES Continued SEML/TEM (25 POSITION) Mating Minimum Maximum Average After 1 Cycle Unmating After 2 Cycles Mating Force (Lbs) Force (Oz) Force (Lbs) Force (Oz) Force (Lbs) Force (Oz) Force (Lbs) 60.0 126.1 83.2 3.75 7.88 5.2 64.8 101.6 81.3 4.05 6.35 5.1 61.1 124.6 80.8 3.82 7.79 5.0 65.3 100.0 79.7 4.08 6.25 5.0 After 3 Cycles Mating Unmating Minimum Maximum Average Maximum Average Maximum Average Force (Lbs) Force (Oz) Force (Lbs) Force (Oz) Force (Lbs) 61.8 106.2 78.0 3.86 6.64 4.9 66.1 97.0 78.7 4.13 6.06 4.9 63.5 101.0 76.3 3.97 6.31 4.8 65.3 92.8 77.0 4.08 5.80 4.8 Maximum Maximum Average Maximum Average Minimum Maximum Average Unmating Force (Lbs) Force (Oz) Force (Lbs) Force (Oz) Force (Lbs) Force (Oz) Force (Lbs) 3.96 5.94 4.7 64.6 88.0 75.7 4.04 5.50 4.7 62.7 91.8 73.6 3.92 5.74 4.6 64.2 90.9 75.1 4.01 5.68 4.7 After 7 Cycles Unmating After 8 Cycles Mating Unmating Force (Oz) Force (Lbs) Force (Oz) Force (Lbs) Force (Oz) Force (Lbs) Force (Oz) Force (Lbs) 62.4 89.9 72.6 3.90 5.62 4.5 62.7 86.6 73.9 3.92 5.41 4.6 62.6 84.2 71.4 3.91 5.26 4.5 62.7 84.5 73.2 3.92 5.28 4.6 After 9 Cycles Unmating Force (Lbs) Force (Oz) Force (Lbs) 62.9 84.6 70.9 3.93 61.1 3.82 5.29 83.5 5.22 4.4 4.5 72.5 After 15 Cycles Mating Unmating Force (Lbs) Force (Oz) Force (Lbs) 63.4 80.5 70.4 3.96 61.4 3.84 5.03 82.1 5.13 4.4 4.5 72.1 After 25 Cycles Mating Unmating Force (Oz) Minimum After 6 Cycles Mating 63.4 95.0 74.9 Force (Oz) Minimum After 5 Cycles Unmating Force (Oz) Force (Oz) Average Unmating Force (Oz) Mating Minimum Mating Force (Lbs) Mating Minimum After 4 Cycles Force (Oz) Mating Minimum Unmating Force (Oz) Force (Lbs) Force (Oz) Force (Lbs) 64.2 83.4 70.4 4.01 63.2 3.95 5.21 84.3 5.27 4.4 4.5 72.3 After 100 Cycles Mating Unmating Force (Oz) Force (Lbs) Force (Oz) Force (Lbs) 69.4 90.4 77.9 4.34 5.65 4.9 60.8 91.8 70.8 3.80 5.74 4.4 Page 23 of 33 Mating Force (Oz) 62.6 82.6 70.5 Force (Lbs) Force (Oz) Force (Lbs) 3.91 60.5 3.78 5.16 81.9 5.12 4.4 4.5 72.3 After 20 Cycles Mating Unmating Force (Oz) 63.5 82.4 70.7 After 10 Cycles Unmating Force (Lbs) Force (Oz) Force (Lbs) 3.97 62.9 3.93 5.15 83.4 5.21 4.4 4.5 72.4 After 50 Cycles Mating Unmating Force (Oz) Force (Lbs) Force (Oz) Force (Lbs) 66.2 87.0 73.3 4.14 5.44 4.6 61.9 87.8 72.6 3.87 5.49 4.5 Tracking Code: TC0917-SEML-2413 Part #: SEML-1XX-02-03.0-G-D-WT Part description: SEML/TEM DATA SUMMARIES Continued 50 POSITION Mating/Unmating Comparison 13.5 12.5 11.5 SEML Mating SEML Unmating SEM Mating SEM Unmating 9.5 8.5 7.5 6.5 5.5 Stress Page 24 of 33 50 C Af yc te le r1 s 00 C yc le s te r Af Af te r 25 C yc le s C yc le s le s Af te r 20 C yc le s C yc te r1 5 Af C yc le s te r1 0 Af C yc le s te r9 Af le s te r8 C yc Af C yc le s Af te r7 le s C yc Af te r6 C yc le s Af te r5 te r4 C yc le s Af C yc le s te r3 Af te r2 Af te r1 C yc le 4.5 Af Forces, lbs. 10.5 Tracking Code: TC0917-SEML-2413 Part #: SEML-1XX-02-03.0-G-D-WT Part description: SEML/TEM DATA SUMMARIES Continued SEM/TEM (50 POSITION) Mating Minimum Maximum Average After 1 Cycle Unmating Force (Oz) Force (Lbs) Force (Oz) Force (Lbs) Force (Oz) Force (Lbs) Force (Oz) Force (Lbs) 137.0 152.0 143.8 8.57 9.50 9.0 88.9 100.0 94.4 5.56 6.25 5.9 129.1 145.8 136.9 8.07 9.11 8.6 88.3 98.8 94.3 5.52 6.18 5.9 After 3 Cycles Mating Unmating Minimum Maximum Average Maximum Average Force (Lbs) Force (Oz) Force (Lbs) Force (Oz) Force (Lbs) Force (Oz) Force (Lbs) 125.9 142.6 134.7 7.87 8.91 8.4 88.5 101.4 95.1 5.53 6.34 5.9 124.7 141.2 133.7 7.80 8.83 8.4 88.4 103.9 96.1 5.52 6.49 6.0 Maximum Average Maximum Force (Oz) Force (Lbs) Force (Oz) Force (Lbs) Force (Oz) Force (Lbs) 7.74 8.90 8.4 88.9 105.2 96.1 5.56 6.58 6.0 122.4 142.7 133.4 7.65 8.92 8.3 89.6 104.8 97.2 5.60 6.55 6.1 Maximum Average Maximum Average Minimum Maximum Average Mating After 8 Cycles Unmating Force (Lbs) Force (Oz) Force (Lbs) Force (Oz) Force (Lbs) Force (Oz) Force (Lbs) 123.0 143.5 134.0 7.69 8.97 8.4 90.3 105.9 98.0 5.64 6.62 6.1 122.7 143.6 134.5 7.67 8.98 8.4 90.7 107.0 98.4 5.67 6.69 6.1 After 9 Cycles Unmating Force (Lbs) Force (Oz) Force (Lbs) 122.9 144.7 134.8 7.68 91.4 5.71 9.04 107.1 6.70 8.4 6.2 99.2 After 15 Cycles Mating Unmating Force (Lbs) Force (Oz) Force (Lbs) 123.7 147.0 137.4 7.73 94.0 5.88 9.19 113.9 7.12 8.6 6.4 102.6 After 25 Cycles Mating Unmating Force (Oz) Minimum After 7 Cycles Unmating Force (Oz) Force (Oz) Minimum After 6 Cycles Unmating Force (Lbs) Force (Oz) Average Mating 123.9 142.4 134.1 Mating Minimum After 5 Cycles Unmating Force (Oz) Mating Minimum Mating After 4 Cycles Unmating Force (Oz) Mating Minimum Mating After 2 Cycles Unmating Force (Lbs) Force (Oz) Force (Lbs) 123.5 148.3 138.8 7.72 96.1 6.01 9.27 114.0 7.12 8.7 6.6 106.0 After 100 Cycles Mating Unmating Force (Oz) Force (Lbs) Force (Oz) Force (Lbs) 128.2 157.5 146.7 8.01 9.84 9.2 100.7 134.0 117.2 6.30 8.38 7.3 Page 25 of 33 Mating Force (Oz) After 10 Cycles Unmating Force (Lbs) Force (Oz) Force (Lbs) 123.2 144.7 135.2 7.70 91.9 5.74 9.04 107.7 6.73 8.4 6.2 99.2 After 20 Cycles Mating Unmating Force (Oz) Force (Lbs) Force (Oz) Force (Lbs) 124.0 148.8 138.1 7.75 95.6 5.98 9.30 111.9 6.99 8.6 6.5 104.3 After 50 Cycles Mating Unmating Force (Oz) Force (Lbs) Force (Oz) Force (Lbs) 125.8 150.5 141.2 7.86 9.41 8.8 98.7 120.0 110.7 6.17 7.50 6.9 Tracking Code: TC0917-SEML-2413 Part #: SEML-1XX-02-03.0-G-D-WT Part description: SEML/TEM DATA SUMMARIES Continued SEML/TEM (50 POSITION) Mating Minimum Maximum Average After 1 Cycle Unmating Force (Oz) Force (Lbs) Force (Oz) Force (Lbs) Force (Oz) Force (Lbs) Force (Oz) Force (Lbs) 158.2 199.4 174.9 9.89 12.47 10.9 152.0 192.9 171.2 9.50 12.06 10.7 159.5 214.1 182.6 9.97 13.38 11.4 158.2 203.4 177.5 9.89 12.71 11.1 After 3 Cycles Mating Unmating Minimum Maximum Average Maximum Average Force (Lbs) Force (Oz) Force (Lbs) Force (Oz) Force (Lbs) Force (Oz) Force (Lbs) 163.5 218.8 186.0 10.22 13.68 11.6 159.5 205.4 178.8 9.97 12.84 11.2 165.9 220.0 187.7 10.37 13.75 11.7 159.3 207.1 179.1 9.96 12.94 11.2 Maximum Average Maximum Force (Oz) Force (Lbs) Force (Oz) Force (Lbs) Force (Oz) Force (Lbs) 10.42 13.79 11.8 157.6 207.2 178.4 9.85 12.95 11.2 167.2 222.5 189.8 10.45 13.91 11.9 158.0 208.0 179.1 9.87 13.00 11.2 Maximum Average Maximum Average Minimum Maximum Average Mating After 8 Cycles Unmating Force (Lbs) Force (Oz) Force (Lbs) Force (Oz) Force (Lbs) Force (Oz) Force (Lbs) 166.0 221.8 190.0 10.38 13.86 11.9 157.2 209.3 179.2 9.83 13.08 11.2 165.8 222.7 189.6 10.36 13.92 11.9 156.5 208.3 178.1 9.78 13.02 11.1 After 9 Cycles Unmating Force (Lbs) Force (Oz) Force (Lbs) 165.2 222.6 188.2 10.32 156.0 9.75 13.92 209.1 13.07 11.8 11.1 177.7 After 15 Cycles Mating Unmating Force (Lbs) Force (Oz) Force (Lbs) 162.0 222.0 188.9 10.12 156.3 9.77 13.88 209.6 13.10 11.8 11.2 178.8 After 25 Cycles Mating Unmating Force (Oz) Minimum After 7 Cycles Unmating Force (Oz) Force (Oz) Minimum After 6 Cycles Unmating Force (Lbs) Force (Oz) Average Mating 166.8 220.6 189.3 Mating Minimum After 5 Cycles Unmating Force (Oz) Mating Minimum Mating After 4 Cycles Unmating Force (Oz) Mating Minimum Mating After 2 Cycles Unmating Force (Lbs) Force (Oz) Force (Lbs) 162.0 222.6 191.3 10.13 156.6 9.79 13.91 213.6 13.35 12.0 11.5 183.5 After 100 Cycles Mating Unmating Force (Oz) Force (Lbs) Force (Oz) Force (Lbs) 172.5 232.4 206.0 10.78 14.53 12.9 170.7 230.6 199.3 10.67 14.41 12.5 Page 26 of 33 Mating Force (Oz) After 10 Cycles Unmating Force (Lbs) Force (Oz) Force (Lbs) 162.7 222.5 189.1 10.17 155.1 9.69 13.91 208.4 13.02 11.8 11.1 177.1 After 20 Cycles Mating Unmating Force (Oz) Force (Lbs) Force (Oz) Force (Lbs) 161.9 223.6 190.1 10.12 156.7 9.79 13.98 212.2 13.26 11.9 11.4 183.1 After 50 Cycles Mating Unmating Force (Oz) Force (Lbs) Force (Oz) Force (Lbs) 166.6 233.7 198.5 10.41 14.61 12.4 163.6 222.7 192.2 10.22 13.92 12.0 Tracking Code: TC0917-SEML-2413 Part #: SEML-1XX-02-03.0-G-D-WT Part description: SEML/TEM DATA MATING/UNMATING: SEM/TEM (10 POSITION) Sample# 1 2 3 4 5 6 7 8 9 10 Sample# 1 2 3 4 5 6 7 8 9 10 After 1 Cycle After 2 Cycles After 3 Cycles After 4 Cycles After 5 Cycles After 6 Cycles After 7 Cycles Mating Unmating Mating Unmating Mating Unmating Mating Unmating Mating Unmating Mating Unmating Mating Unmating 2.07 1.87 2.17 2.11 2.09 1.10 1.10 1.21 1.56 1.25 2.01 1.95 2.14 1.82 2.06 1.12 1.13 1.24 1.13 1.34 2.04 1.96 2.10 1.98 2.09 1.13 1.15 1.26 1.15 1.33 2.03 2.01 2.10 2.01 2.11 1.16 1.16 1.24 1.16 1.35 2.06 2.04 2.09 2.04 2.06 1.18 1.15 1.24 1.20 1.37 2.05 2.00 2.09 1.99 2.07 1.20 1.21 1.24 1.20 1.37 2.03 2.02 2.07 1.99 2.09 1.23 1.22 1.27 1.20 1.39 2.16 1.16 1.92 1.05 1.96 1.13 1.99 1.14 2.01 1.40 After 8 Cycles 2.01 1.15 2.04 1.15 1.89 1.09 2.15 1.18 2.03 1.48 After 9 Cycles 2.02 1.14 2.04 1.18 1.91 1.08 2.18 1.22 2.08 1.51 After 10 Cycles 2.01 1.15 2.05 1.19 1.94 1.09 2.17 1.21 2.07 1.57 After 15 Cycles 2.00 1.15 2.09 1.18 1.92 1.08 2.19 1.24 2.09 1.58 After 20 Cycles 2.02 1.14 2.09 1.20 1.95 1.11 2.16 1.24 2.11 1.62 After 25 Cycles Mating Unmating Mating Unmating Mating Unmating Mating Unmating Mating Unmating Mating Unmating Mating Unmating 2.02 2.00 2.05 2.00 2.08 1.23 1.23 1.28 1.24 1.40 1.99 2.01 2.03 2.01 2.09 1.23 1.24 1.26 1.25 1.41 2.00 1.97 2.02 1.99 2.09 1.22 1.24 1.26 1.25 1.41 1.97 1.95 1.98 1.98 1.99 1.27 1.26 1.30 1.29 1.43 2.00 1.93 1.98 1.97 1.99 1.31 1.29 1.32 1.32 1.46 1.99 1.93 1.99 2.00 2.04 1.32 1.29 1.34 1.38 1.47 2.08 2.02 2.01 1.97 2.11 1.32 1.39 1.43 1.50 1.54 2.05 2.14 1.92 2.15 2.08 1.19 1.25 1.13 1.30 1.65 2.07 2.15 1.91 2.13 2.03 1.15 1.26 1.12 1.32 1.64 2.02 2.11 1.84 2.08 2.05 1.17 1.29 1.15 1.37 1.66 2.01 2.09 1.84 2.09 2.08 1.19 1.38 1.19 1.39 1.71 2.03 2.07 1.90 2.10 2.05 1.22 1.40 1.19 1.41 1.71 2.09 2.11 2.01 2.17 2.11 1.27 1.56 1.35 1.59 1.79 2.04 1.17 2.12 1.24 1.93 1.12 2.15 1.27 2.07 1.64 After 100 Cycles Sample# 1 2 3 4 5 Mating Unmating 2.23 2.15 2.09 2.10 2.15 1.54 1.52 1.56 1.59 1.72 6 7 8 9 10 2.19 2.22 2.17 2.31 2.24 1.41 1.69 1.49 1.71 1.93 Page 27 of 33 2.04 1.15 2.10 1.21 1.95 1.11 2.16 1.25 2.07 1.64 After 50 Cycles Tracking Code: TC0917-SEML-2413 Part #: SEML-1XX-02-03.0-G-D-WT Part description: SEML/TEM DATA Continued SEML/TEM (10 POSITION) Sample# 1 1 3 4 5 6 7 8 9 10 Sample# 1 2 3 4 5 6 7 8 9 10 After 1 Cycle After 2 Cycles After 3 Cycles After 4 Cycles After 5 Cycles After 6 Cycles After 7 Cycles Mating Unmating Mating Unmating Mating Unmating Mating Unmating Mating Unmating Mating Unmating Mating Unmating 2.17 2.63 3.24 2.58 3.05 2.25 3.04 3.12 3.51 2.86 2.39 2.97 3.19 3.20 3.09 2.50 3.21 3.04 2.73 2.87 2.44 3.21 3.17 3.55 3.08 2.55 3.35 3.13 2.77 2.84 2.52 3.44 3.06 3.59 3.14 2.60 3.45 2.92 2.92 2.79 2.47 3.49 3.01 3.90 3.17 2.59 3.55 2.96 2.79 2.74 2.50 3.43 3.04 3.89 3.14 2.60 3.54 2.93 2.90 2.75 2.53 3.53 2.99 3.85 3.22 2.58 3.58 2.95 3.01 2.79 3.02 2.75 2.84 2.83 2.59 2.44 2.96 2.95 3.64 3.24 After 8 Cycles 3.23 2.98 3.19 3.12 2.67 2.53 3.26 3.19 3.64 3.38 After 9 Cycles 3.08 2.91 3.18 3.13 2.65 2.58 3.53 3.38 3.68 3.34 After 10 Cycles 3.09 2.92 3.25 3.16 2.68 2.59 3.68 3.43 3.69 3.39 After 15 Cycles 3.06 2.93 3.36 3.23 2.77 2.63 3.78 3.49 3.71 3.38 After 20 Cycles 3.09 2.94 3.39 3.24 2.74 2.68 3.86 3.51 3.68 3.31 After 25 Cycles 3.11 2.89 3.41 3.24 2.78 2.65 3.93 3.50 3.72 3.31 After 50 Cycles Mating Unmating Mating Unmating Mating Unmating Mating Unmating Mating Unmating Mating Unmating Mating Unmating 2.57 3.52 3.00 3.93 3.22 2.61 3.56 2.96 2.99 2.75 2.58 3.52 3.03 3.98 3.24 2.59 3.57 2.96 3.01 2.77 2.62 3.53 3.05 3.94 3.27 2.57 3.57 2.98 3.90 2.77 2.57 3.62 3.10 4.01 3.27 2.58 3.68 3.08 3.06 2.77 2.62 3.76 3.16 4.02 3.31 2.63 3.72 3.13 3.04 2.75 2.62 3.74 3.20 4.08 3.42 2.64 3.78 3.20 2.99 2.75 2.65 3.89 3.49 4.23 3.40 2.71 3.88 3.51 3.01 2.99 3.14 3.50 2.85 3.91 3.77 2.86 3.29 2.70 3.53 3.35 3.13 3.51 2.85 3.96 3.81 2.85 3.32 2.72 3.53 3.41 3.28 3.82 3.06 4.40 3.89 2.91 3.41 2.93 3.68 3.42 3.42 3.99 3.25 4.25 3.88 3.00 3.54 3.04 3.79 3.50 3.55 4.11 3.35 4.30 3.87 3.11 3.61 3.19 3.80 3.61 4.02 3.99 3.49 4.34 4.12 3.62 3.62 3.25 3.80 3.72 3.11 2.98 3.47 3.26 2.82 2.70 3.92 3.52 3.74 3.34 After 100 Cycles Sample# 1 2 3 4 5 Mating Unmating 2.62 3.94 3.59 4.04 3.71 2.62 3.81 3.63 3.28 2.96 6 7 8 9 10 4.23 3.94 3.84 4.31 4.12 3.82 3.76 3.58 3.78 3.73 Page 28 of 33 Tracking Code: TC0917-SEML-2413 Part #: SEML-1XX-02-03.0-G-D-WT Part description: SEML/TEM DATA Continued SEM/TEM (25 POSITION) Sample# 1 2 3 4 5 6 7 8 9 10 Sample# 1 2 3 4 5 6 7 8 9 10 After 1 Cycle After 2 Cycles After 3 Cycles After 4 Cycles After 5 Cycles After 6 Cycles After 7 Cycles Mating Unmating Mating Unmating Mating Unmating Mating Unmating Mating Unmating Mating Unmating Mating Unmating 3.48 3.37 3.65 4.53 3.75 2.90 2.39 2.81 3.83 3.06 3.28 3.38 3.62 4.62 3.92 2.93 2.54 2.91 3.73 3.00 3.33 3.42 3.70 4.59 3.86 3.02 2.50 3.02 3.71 3.03 3.41 3.47 3.77 4.49 3.88 3.03 2.48 3.09 3.70 3.11 3.50 3.49 3.79 4.38 3.92 3.02 2.49 3.15 3.49 3.16 3.54 3.53 3.78 4.30 4.03 3.02 2.48 3.18 3.57 3.15 3.63 3.34 3.73 4.36 4.04 2.94 2.62 3.13 3.55 3.18 4.53 3.29 3.47 2.64 4.77 3.88 4.82 3.08 4.23 3.51 After 8 Cycles 4.55 3.42 3.54 2.70 4.71 3.98 4.79 3.11 4.24 3.57 After 9 Cycles 4.53 3.47 3.62 2.74 4.68 3.97 4.85 3.22 4.23 3.72 After 10 Cycles 4.54 3.46 3.63 2.78 4.71 3.99 4.74 3.24 4.24 3.67 After 15 Cycles 4.49 3.42 3.68 2.81 5.04 4.36 4.68 3.28 4.28 3.62 After 20 Cycles 4.46 3.47 3.73 2.81 4.87 4.34 4.59 3.31 4.35 3.58 After 25 Cycles Mating Unmating Mating Unmating Mating Unmating Mating Unmating Mating Unmating Mating Unmating Mating Unmating 3.63 3.36 3.74 4.43 3.99 2.94 2.63 3.14 3.60 3.25 3.57 3.36 3.75 4.42 3.99 2.96 2.64 3.17 3.70 3.31 3.63 3.36 3.74 4.43 3.98 2.97 2.63 3.15 3.75 3.37 3.74 3.40 3.71 4.53 4.08 3.00 2.68 3.21 3.86 3.45 3.63 3.53 3.68 4.60 4.11 2.88 2.47 3.22 3.97 3.49 3.68 3.50 3.65 4.59 4.12 2.90 2.61 3.26 4.11 3.56 3.72 3.54 3.81 4.91 4.32 2.95 2.78 3.37 4.36 3.74 4.36 3.73 4.60 4.33 4.29 3.54 2.82 4.21 3.27 3.45 4.33 3.73 4.60 4.27 4.29 3.50 2.81 4.21 3.24 3.42 4.30 3.74 4.49 4.29 4.25 3.51 2.85 4.23 3.28 3.38 4.24 3.71 4.45 4.29 4.10 3.53 2.85 4.26 3.36 3.41 4.22 3.69 4.41 4.30 4.10 3.56 2.85 4.27 3.40 3.46 4.35 3.75 4.48 4.38 4.17 3.73 2.94 4.45 3.58 3.57 4.42 3.54 3.73 2.82 4.66 4.23 4.42 3.32 4.31 3.49 After 100 Cycles Sample# 1 2 3 Mating Unmating 3.79 3.81 3.88 3.61 2.86 3.11 4 5 4.27 4.81 2.62 3.99 6 7 8 9 10 4.43 3.92 4.62 4.68 4.37 3.76 3.15 4.76 3.85 3.79 Page 29 of 33 4.42 3.52 3.71 2.85 4.83 4.27 4.49 3.33 4.32 3.54 After 50 Cycles Tracking Code: TC0917-SEML-2413 Part #: SEML-1XX-02-03.0-G-D-WT Part description: SEML/TEM DATA Continued SEML/TEM (25 POSITION) Sample# 1 2 3 4 5 6 7 8 9 10 Sample# 1 2 3 4 5 6 7 8 9 10 After 1 Cycle After 2 Cycles After 3 Cycles After 4 Cycles After 5 Cycles After 6 Cycles After 7 Cycles Mating Unmating Mating Unmating Mating Unmating Mating Unmating Mating Unmating Mating Unmating Mating Unmating 5.68 5.14 4.74 4.45 3.75 5.15 5.62 4.07 4.73 4.05 5.40 4.96 4.71 4.31 3.82 5.02 5.55 4.27 4.58 4.08 5.28 5.04 4.77 4.27 3.86 4.97 5.56 4.19 4.55 4.13 5.16 4.82 4.53 4.26 3.97 5.01 5.29 4.08 4.41 4.16 5.06 4.73 4.61 4.27 3.96 5.12 5.12 4.04 4.43 4.12 5.00 4.59 4.52 4.24 3.92 5.22 5.03 4.01 4.28 4.12 5.04 4.54 4.42 4.24 3.90 5.22 4.97 3.92 4.29 4.09 5.08 5.69 7.88 6.35 6.44 5.46 4.46 5.09 4.40 4.58 After 8 Cycles 5.02 5.41 7.79 6.25 6.00 5.27 4.31 4.82 4.16 4.54 After 9 Cycles 4.82 5.31 6.64 6.06 5.75 5.26 4.20 4.62 4.09 4.55 After 10 Cycles 4.80 5.18 6.31 5.80 5.66 5.28 4.14 4.48 4.06 4.43 After 15 Cycles 4.70 5.13 5.94 5.50 5.40 5.15 4.13 4.43 4.02 4.26 After 20 Cycles 4.60 5.01 5.74 5.68 5.29 5.03 4.02 4.33 4.05 4.25 After 25 Cycles Mating Unmating Mating Unmating Mating Unmating Mating Unmating Mating Unmating Mating Unmating Mating Unmating 5.06 4.49 4.33 4.23 3.91 5.19 4.88 3.92 4.26 4.04 5.01 4.41 4.25 4.23 3.93 5.15 4.82 3.82 4.29 4.01 4.96 4.42 4.22 4.26 3.91 5.11 4.78 3.78 4.31 4.00 5.03 4.39 4.24 4.27 3.97 5.13 4.72 3.84 4.39 3.98 5.15 4.43 4.25 4.20 3.97 5.21 4.71 3.93 4.31 4.02 5.21 4.45 4.31 4.02 4.02 5.27 4.67 3.95 4.28 4.02 5.44 4.45 4.40 4.16 4.14 5.49 4.62 4.11 3.87 4.16 4.26 5.29 5.01 3.98 3.97 4.73 5.22 4.90 4.26 4.10 4.17 5.16 4.95 3.96 4.07 4.67 5.12 4.89 4.27 4.28 4.12 4.91 4.96 3.96 4.18 4.58 4.94 4.89 4.28 4.31 4.15 4.82 4.97 3.98 4.26 4.50 4.90 4.92 4.31 4.44 4.01 4.70 4.99 4.01 4.30 4.46 4.77 4.94 4.31 4.49 4.35 4.65 5.15 4.51 4.58 4.44 4.52 5.09 4.28 4.78 4.33 4.85 5.26 5.28 5.07 4.90 3.98 4.29 3.95 4.11 After 100 Cycles Sample# 1 2 3 4 5 Mating Unmating 5.65 4.92 4.60 4.70 4.53 5.74 4.55 4.26 3.80 4.22 6 7 8 9 10 4.84 4.77 4.34 5.15 5.16 4.60 4.57 4.05 4.44 4.02 Page 30 of 33 4.51 4.88 5.62 5.41 5.14 4.99 4.02 4.29 3.93 4.15 After 50 Cycles Tracking Code: TC0917-SEML-2413 Part #: SEML-1XX-02-03.0-G-D-WT Part description: SEML/TEM DATA Continued SEM/TEM (50 POSITION) Sample# 1 1 3 4 5 6 7 8 9 After 1 Cycle After 2 Cycles After 3 Cycles After 4 Cycles After 5 Cycles After 6 Cycles After 7 Cycles Mating Unmating Mating Unmating Mating Unmating Mating Unmating Mating Unmating Mating Unmating Mating Unmating 9.13 8.59 8.61 9.47 9.42 6.25 5.91 5.80 6.16 5.97 8.18 8.32 8.44 9.11 8.88 6.15 5.96 5.86 6.18 5.89 7.89 8.32 8.44 8.91 8.78 6.34 6.00 5.82 6.19 5.96 7.80 8.35 8.45 8.83 8.71 6.49 6.04 5.90 6.24 6.00 7.74 8.40 8.48 8.90 8.75 6.58 5.97 5.90 6.33 5.90 7.65 8.42 8.53 8.92 8.68 6.55 6.06 5.98 6.37 6.00 7.69 8.46 8.56 8.97 8.70 6.62 6.11 6.05 6.44 6.03 8.57 5.56 8.78 5.67 8.82 5.74 9.50 6.03 After 8 Cycles 8.07 5.52 8.74 5.70 8.30 5.75 8.98 6.04 After 9 Cycles 7.87 5.53 8.59 5.83 8.10 5.63 8.85 6.18 After 10 Cycles 7.80 5.52 8.53 5.90 8.04 5.67 8.74 6.30 After 15 Cycles 7.78 5.58 8.58 5.89 8.03 5.56 8.76 6.35 After 20 Cycles 7.69 5.60 8.52 5.99 8.01 5.76 8.63 6.37 After 25 Cycles 7.69 5.64 8.55 6.03 8.04 5.80 8.72 6.43 After 50 Cycles Sample# Mating Unmating Mating Unmating Mating Unmating Mating Unmating Mating Unmating Mating Unmating Mating Unmating 1 2 3 4 5 6 7.79 8.48 8.62 8.98 8.78 7.67 6.69 6.14 6.08 6.49 6.07 5.67 7.79 8.49 8.66 9.04 8.77 7.68 6.70 6.19 6.12 6.52 6.09 5.71 7.82 8.54 8.75 9.04 8.76 7.70 6.73 6.17 6.04 6.61 6.07 5.74 8.26 8.62 8.84 9.19 8.92 7.73 7.12 6.39 6.28 6.80 6.27 5.88 8.05 8.67 8.92 9.30 8.93 7.75 6.95 6.52 6.39 6.99 6.41 5.98 8.25 8.71 8.95 9.27 9.02 7.72 7.09 6.71 6.46 7.12 6.50 6.01 8.75 8.79 9.02 9.41 9.04 7.86 7.50 7.17 6.58 7.48 6.82 6.17 7 8 9 8.58 5.90 8.07 5.82 8.72 6.49 After 100 Cycles 8.61 8.09 8.71 6.13 5.83 6.55 8.66 8.09 8.69 6.09 5.81 6.55 8.75 8.24 8.77 6.31 6.01 6.66 8.86 8.31 8.88 6.54 6.11 6.79 8.86 8.32 8.96 6.63 6.15 6.97 9.08 8.41 9.06 7.04 6.35 7.18 Sample# 1 Mating Unmating 9.53 8.38 2 3 4 5 6 7 9.17 9.31 9.84 9.37 8.01 9.23 7.84 7.05 7.79 7.24 6.30 7.14 8 9 8.84 9.24 6.77 7.40 Page 31 of 33 Tracking Code: TC0917-SEML-2413 Part #: SEML-1XX-02-03.0-G-D-WT Part description: SEML/TEM DATA Continued SEML/TEM (50 POSITION) Sample# 1 2 3 4 5 6 7 8 9 10 Sample# 1 2 3 4 5 6 7 8 9 10 After 1 Cycle After 2 Cycles After 3 Cycles After 4 Cycles After 5 Cycles After 6 Cycles Mating Unmating Mating Unmating Mating Unmating Mating Unmating Mating Unmating Mating Unmating Mating Unmating 11.85 10.84 12.47 11.00 11.13 11.36 9.70 12.06 10.87 10.75 12.27 11.08 13.38 11.09 11.39 11.58 10.10 12.71 10.71 11.00 12.51 11.34 13.68 10.80 11.41 11.62 10.33 12.84 10.64 10.92 12.67 11.48 13.75 10.69 11.43 11.84 10.42 12.94 10.40 10.86 12.88 11.49 13.79 10.68 11.35 11.80 10.48 12.95 10.24 10.77 13.08 11.46 13.91 10.58 11.29 11.90 10.64 13.00 10.11 10.73 13.13 11.51 13.86 10.57 11.24 11.96 10.68 13.08 10.02 10.71 10.80 10.60 10.35 10.43 10.91 11.03 9.89 10.70 10.07 9.50 After 8 Cycles 10.76 10.74 11.35 11.05 11.75 11.60 11.11 11.57 9.97 9.89 After 9 Cycles 10.62 10.70 11.84 11.06 12.14 11.72 11.69 11.94 10.22 9.97 After 10 Cycles 10.60 10.59 12.03 11.15 12.36 11.84 11.95 11.96 10.37 9.96 After 15 Cycles 10.57 10.36 12.39 11.10 12.56 11.88 12.20 12.11 10.42 9.85 After 20 Cycles 10.45 10.32 12.47 11.20 12.60 11.99 12.28 12.21 10.54 9.87 After 25 Cycles After 7 Cycles 10.38 10.34 12.49 11.22 12.55 11.96 12.40 12.23 10.59 9.83 After 50 Cycles Mating Unmating Mating Unmating Mating Unmating Mating Unmating Mating Unmating Mating Unmating Mating Unmating 12.95 11.51 13.92 10.48 11.19 11.42 10.74 13.02 9.96 10.71 11.99 11.52 13.92 10.48 11.23 11.15 10.77 13.07 9.90 10.70 12.88 11.58 13.91 10.39 11.17 11.80 10.73 13.02 9.75 10.58 12.54 11.65 13.88 10.37 11.11 11.46 11.11 13.10 9.77 10.62 13.02 11.71 13.98 10.35 11.05 13.20 11.33 13.26 9.79 10.62 13.03 12.03 13.91 10.45 10.99 13.02 11.48 13.35 9.79 10.66 13.36 12.79 14.61 10.72 11.41 13.24 12.47 13.92 10.22 11.15 10.32 12.60 12.59 12.45 10.54 10.19 11.25 12.00 12.31 9.75 10.17 12.60 12.57 12.45 10.49 10.02 11.18 11.84 12.09 9.69 10.12 12.54 12.78 12.51 10.60 10.04 11.35 12.11 12.36 9.84 10.12 12.41 12.98 12.58 10.64 10.04 11.40 12.34 12.44 10.02 10.13 12.28 13.22 12.86 10.69 9.99 11.53 12.36 12.53 10.01 10.41 12.55 13.91 13.39 10.90 10.36 12.06 13.14 13.07 10.51 10.36 10.25 12.58 11.16 12.56 12.03 12.43 12.27 10.53 9.78 After 100 Cycles Sample# 1 2 3 4 5 Mating Unmating 14.53 13.35 14.44 11.55 11.87 14.41 13.17 13.78 10.67 11.55 6 7 8 9 10 10.78 12.45 14.36 14.02 11.38 10.72 11.78 13.89 13.55 11.04 Page 32 of 33 Tracking Code: TC0917-SEML-2413 Part #: SEML-1XX-02-03.0-G-D-WT Part description: SEML/TEM EQUIPMENT AND CALIBRATION SCHEDULES Equipment #: TCT-04 Description: Dillon Quantrol TC21 25-1000 mm/min series test stand Manufacturer: Dillon Quantrol Model: TC2 I series test stand Serial #: 04-1041-04 Accuracy: Speed Accuracy: +/- 5% of indicated speed; Speed Accuracy: +/- 5% of indicated speed; … Last Cal: 5/6/2008, Next Cal: 5/6/2009 Equipment #: LC-50N-3 Description: 50 N icell load cell for Dillon Test Stand Manufacturer: Mecmesin (Dillon/Quantrol) Model: ILC Serial #: 08-0093-02 Accuracy: .10% of Capacity … Last Cal: 2/15/2009, Next Cal: 02/15/2010 Page 33 of 33