● ● ● ● ● ● ● ● ● Features LED Driver 3W Class II AC-DC LED Power Supply 350mA to 700mA CC/CV Output ENEC, UL, RCM and CB Certified Universal Input Voltage Range Fused Input and Protected Output 3kVAC Isolation IP66 Low Cost 3 Year Warranty Description A compact universal AC input 3W constant current switching power module suitable for driving 1 - 6 high power LEDs. The output (dual constant voltage / constant current mode) current limit is fixed at 350mA, 500mA or 700mA. At lower output currents, the output is constant voltage. Connections are via 118mm long flying leads. Selection Guide Part Number (VDC) CV Mode (mA) (VDC) CC Mode (mA) Efficiency typ. (%) RACD03-350 15 0-350 2.5-15 350 72 RACD03-500 11 0-500 2.5-11 500 71 RACD03-700 6 0-700 2.5-6 700 62 LIGHTLINE AC/DC-Converter with 3 year Warranty 3 Watt Single Output Specifications (typical at 25°C and after warm up time unless otherwise specified ) Input Voltage Range 90-264VAC or 120-370VDC Rated Power 3W nom. / 5.5W max. Input Frequency Range 47-63 Hz Output Voltage Range 2.5 - 15VDC max. Inrush Current (<2mS) 230VAC 10A max. Leakage Current 240VAC/50Hz Input Fuse Built-in 0.2mA typ. T1A Input Current Output Current Accuracy RoHS 2011/65/EU 6/6 E340696 UL-8750 Certified EN-61347 Certified ENEC Certified 130mA max. (combined Tolerance, Load Regulation and Line Regulation) Minimum Load Open Circuit Protected ±10% 1 LED Output Ripple 0.1Ap-p max. Hold Up Time 18ms min. Operating Frequency 66kHz typ. AC RMS Isolation Voltage I/P to O/P 3.75kV / 1 minute Temperature Coefficient ±0.02%/°C typ. Overload Protection 120% typ. Short Circuit Protection Continuous Current Limit Output Overvoltage Protection Overtemperature Protection RACD03 Zener Diode Clamp Shutdown, Automatic restart after cooling down Operating Temperature Range Ambient Temperature (free air convection, according to CE/UL) Case Temperature Operating Temperature Range Ambient Temperature (free air convection, according to ENEC) Case Temperature -20°C to +50°C 75°C max. -20°C to +40°C 75°C max. Storage Temperature Range -25°C to +85°C Humidity 95% RH max. IP Rating IP66 PCB Material Plastic Resin with Fibreglass (UL94V-0) Case Material Plastic Weight 45g continued on next page Refer to Application Notes www.recom-power.com REV: 1/2015 L-19 RACD03 Series LIGHTLINE AC/DC-Converter Specifications (typical at 25°C and after warm up time unless otherwise specified ) Packing Quantity Designed to meet Standards Electrical Lighting, EMC Emissions Limits for Harmonics Emissions EMC Compatability: Flicker and Voltage Variations Electrical Lighting: EMC Immunity Class II Power Supply Safety FCC LED Lighting Safety (E340696) RCM (U21376) ENEC General Safety ENEC Safety of AC supplied Control Gear for LED Modules Certifications Design Lifetime Connections 25°C ambient AC Input Live AC Input Neutral LED + LED - 10pc EN55015:2006 + A1: 2007 + A2:2009 EN 61000-3-2:2006 EN 61000-3-3:2006 EN 61547:1995 + A1:2000 UL1310 FCC18A UL8750 AS/NZS 61347.1:2002, IEC 61347-2-13 EN 61347-1: 2008 EN 61347-2-13: 2006 >20 x 10³ hours in operation Brown Wire, AWG18, 172mm + 5-7mm stripped and tinned Blue Wire, AWG18, 172mm + 5-7mm stripped and tinned Red Wire, AWG18, 128mm + 5-7mm stripped and tinned Black Wire, AWG18, 128mm + 5-7mm stripped and tinned Note: All LED Drivers may not be used without a load. They must be switched on the primary side only. Noncompliance may damage the LED or reduce its lifetime. Characteristics Constant Current (CC) and Constant Voltage (CV) Graph Condition CC Output Voltage RACD03-500 CV 11V Maximum Number of LED drivers per circuit breakers RACD03-700 CV 6V CC Circuit Breaker Current Typ 10A 16A 20A 25A C 221 247 337 430 230VAC, 1Ohm 90° phase angle B C 80 265 157 317 200 437 254 550 700mA 500mA Output Current 350mA 3V Circuit Breaker 115VAC, 1Ohm 90° phase angle CC RACD03 RACD03-350 CV 15V Nominal Current Limits Package Style and Pinning 1.3+0.1 - TC Wire Connections 29.6 4.0 5.0 38.1 46.1 23.1 2 Mounting screws are included Tc = Case Temperature Measuring Point 52.1 Wire Function Brown VAC in (L) Blue VAC in (N) Red LED+ Black LED- Tolerance XX = +1mm/ -0.5mm XX.X = +/- 0.25mm The product information and specifications are subject to change without prior notice. RECOM products are not authorized for use in safety-critical applications (such as life support) without RECOM’s explicit written consent. A safety-critical application is defined as an application where a failure of a RECOM product may reasonably be expected to endanger or cause loss of life, inflict bodily harm or damage property. The buyer shall indemnify and hold harmless RECOM, its affiliated companies and its representatives against any damage claims in connection with the unauthorized use of RECOM products in such safety-critical applications. L-20 REV: 1/2015 www.recom-power.com