RACT20 Series - recom

Features
LED DRIVER
●
●
●
●
●
●
●
●
20W Dimmable AC-DC LED Power Supply
350mA, 500mA, 700mA or 1050mA Outputs
ENEC, UL, RCM and CB Certified
Deep Dimming to 0% *
Active Power Factor Correction >0.95
3.75kVAC Isolation
Output Connector to avoid miswiring
5 Year Warranty
LIGHTLINE
AC/DC-Converter
with 5 year Warranty
Description
20W Triac
Dimmable
LED Driver
The RACT20 series is a constant current dimmable AC/DC source for driving high power LED applications.
The phase angle dimming function works with leading or trailing edge dimmers. This driver is suitable for indoor
LED lighting systems and powers 5-15 high power LEDs or single LED arrays from 350mA up to 1A.
Selection Guide
Output
Current
(mA)
350
Output
Voltage
(VDC)
30-56
Dimming
Control
RACT20-350
Input
Voltage
(VAC)
230
Triac
Efficiency
typ.
(%)
82
Max.
#
LEDs
15 x 1W
RACT20-500
230
500
21-39
Triac
82
12 x 1W
RACT20-700
230
700
15-28
Triac
81
8 x 2W, 8+8 x 1W
RACT20-1050
230
1050
12-18
Triac
81
5 x 3W, 5+5 x 2W
RACT20-350-US
115
350
30-56
Triac
82
15 x 1W
RACT20-500-US
115
500
21-39
Triac
82
12 x 1W
RACT20-700-US
115
700
15-28
Triac
81
8 x 2W, 8+8 x 1W
RACT20-1050-US
115
1050
12-18
Triac
81
5 x 3W, 5+5 x 2W
Specifications (typical at 25°C, nominal input voltage, rated output current unless otherwise specified)
Input Voltage Range
RACT20-xxxx
180-264VAC
RACT20-xxxx-US
90-135VAC
Rated Power
20W max.
Output Current Accuracy
±5% max.
Input Current
115VAC
0.4A max.
230VAC
0.2A max.
Input Frequency Range
Power Factor
THD
Full Load, 115VAC
8% max.
Full Load, 230VAC
11% max.
<0.75mA
350mA
60VDC max.
(No Load Vout)
500mA
44VDC max.
700mA
33VDC max.
1050mA
22VDC max.
350mA, 500mA
4.5Vp-p max.
700mA, 1050 mA
4.0Vp-p max.
Short Circuit Protection
Hiccup mode, Auto recovery
95°C ±10°C (RT1) Hiccup mode, Auto recovery
Overtemperature Protection
Isolation Voltage
3.75kVAC / 1 minute
Efficiency at Full Load
Operating Temperature Range
see selection guide
AC phase-cut dimming, work with leading/trailing edge dimmers
Ambient Temperature
-30°C to +50°C
(free air convection, according to CE/UL) Case Temperature
Operating Temperature Range
E340696
UL-8750 certified
UL-60950-1 certified
European Version only:
ENEC 61347 certified
RACT20
* only US-Versions
>0.95
Open Circuit Voltage
Dimming
RoHS
2011/65/EU
6/6
47-63Hz
Full Load
Leakage Current
Output Ripple and Noise
*
Derating-Graph
(Ambient Temperature)
100
Output Power (%)
Part
Number
80
Safe Operating
Area
60
40
20
0
-30
0
25
75
50
Ambient Temperature °C
85°C max.
Ambient Temperature
-30°C to +50°C
(free air convection, according to ENEC) Case Temperature
80°C max.
Refer to Application Notes
continued on next page
www.recom-power.com
REV: 0/2015
L-33
RACT20
Series
LIGHTLINE
DC/DC-Converter
Specifications (typical at 25°C, nominal input voltage, rated output current unless otherwise specified)
Storage Temperature
-40°C to +85°C
Relative Humidity
95% RH
EMC
design refer to EN55022
IP Rating
IP Rating suitable for indoor LED lighting system
Design Lifetime
Class B
IP20
3
25°C ambient
>70 x 10 hours in operation
Package Weight
145g
Packing Quantity
1 pc.
PCB Material
Plastic Resin with Fibreglass (UL94V-0)
Case Material
Plastic
Connections
AC Input
Screw Terminal
LED Output
Screw Terminal
LED Output
5.5mm Socket with 2mm Pin
(suiteable matching plug Switchcraft S760 or similar)
Standards
ENEC Lamp Controlgear
EN61347-2-13:2006
EN61347-1:2008
Electrical Lighting, EMC Emissions
EN55015:2006 + A2:2009
Limits for Harmonics Emissions
EN 61000-3-2:2006 + A2:2009
EMC Compatability: Flicker and Voltage Variations
EN 61000-3-3:2006
Electrical Lighting: EMC Immunity
EN 61547:2009
AS/NZS 61347.1:2002, IEC 61347-2-13
RCM (21377)
FCC
Certifications
FCC15B
LED Lighting Safety (E340696)
UL8750
UL60950-1
CAN/CSA C22.2 No. 60950-1-07
PSE
J61347-1(H20), J61347-2-13(H21), J55015(H20)
*The triac dimmer must be capable of dimming down to zero
Note:
All LED Drivers may not be used without a load. They must be switched on the primary side only. Noncompliance may damage the LED or reduce its lifetime.
Characteristics
115VAC - Version
Dimming Response
Ta=25°C
LED Brightness
100%
0%
RACT20-700 & RACT20-1050
RACT20-350 & RACT20-500
60°
Output Power (%)
100
80
60
40
20
0
140° 150°
180°
140°
135
230VAC - Version
Ta=25°C
RACT20-xxx-US
70°
100
Input Voltage (VAC)
100
180°
Phase angle
Output Power (%)
0%
90
Phase angle
100%
LED Brightness
RACT20
Information Technology Equipment - Safety
80
60
40
20
0
180
200
264
Input Voltage (VAC)
L-34
REV: 0/2015
www.recom-power.com
RACT20
Series
LIGHTLINE
AC/DC-Converter
Characteristics
Maximum Number of LED drivers per circuit breakers
Condition
115VAC, 1Ohm
90° phase angle
230VAC, 1Ohm
90° phase angle
277VAC, 1Ohm
90° phase angle
Circuit Breaker
Circuit Breaker Current
Typ
10A
16A
20A
25A
C
47
68
84
105
B
36
57
69
85
C
57
87
109
134
B
41
65
80
98
C
65
99
125
154
Package Style and Pinning
137.5
Cable entry
with strain relief
41
83
Tc
50.2
5.5mm socket
x 2.1mm
27
RACT20
3.5mm dia.
129
Connections
23
CN1
Function
L
VAC in (L)
N
VAC in (N)
CN2
Function
+
LED+
-
LED-
5.5mm Socket* Function
Pin
LED+
Shell
LED-
Tolerance
XX = +/-1mm
XX.X = */-0.5mm
The product information and specifications are subject to change without prior notice. RECOM products are not authorized for use in safety-critical applications (such as life support) without RECOM’s explicit
written consent. A safety-critical application is defined as an application where a failure of a RECOM product may reasonably be expected to endanger or cause loss of life, inflict bodily harm or damage property. The buyer
shall indemnify and hold harmless RECOM, its affiliated companies and its representatives against any damage claims in connection with the unauthorized use of RECOM products in such safety-critical applications.
www.recom-power.com
REV: 0/2015
L-35