Features ● ● ● ● LED DRIVER Constant Voltage Output ENEC, UL, RCM and CB Certified Power Factor Corrected Short Circuit, Overload and Overtemperature Protected LIGHTLINE AC/DC-Converter with 5 year Warranty Description The RACV30 is the first of a new series of constant voltage LED drivers, ideal for powering LED strips and LED modules in applications such as cove lighting, signage, back lighting, channel letters, displays or under cabinet lighting. The input voltage range of 90 to 264VAC assures full functionality worldwide. The new drivers provide up to 30 watts and are available with outputs of 12VDC or 24VDC. The output voltages are closely regulated to compensate for varying loads or supply changes (2% max.) Selection Guide Part Number Input Voltage Range (VAC) Output Voltage (VDC) Output Current Range (mA) Efficiency typ. (%) RACV30-24 100-240 24 0-1250 84 RACV30-12 100-240 12 0-2500 83 30 Watt PFC Single CV Output Specifications (typical at 25°C, nominal input voltage and full load) Input Voltage Range Input Frequency Range Input Current Power Factor Correction THD Inrush Current Input Fuse Output Voltage Accuracy Load Regulation Line Regulation Output Ripple Operating Frequency Isolation Voltage Operating Temperature Range (free air convection) Humidity Case Material Weight MTBF Design Lifetime EMC Standards Certifications LED General Safety ENEC PSE Screw Terminal Specification Connector Plug Specification Short Circuit Protection Overload Protection Overtemperature Protection L-44 Full Load Full Load Full Load, 115VAC (2ms peak) (Output Load min <-> max) (Output Load min <-> max) (VACin min <-> VACin max) Ambient Temperature Case Temperature RACV30-24 RACV30-12 MIL STD 217F 90-264VAC or 140-370VDC 47-63Hz < 380mA >0.92 12% max. 30A max. internal 2A/250V ±5% 2% max. 2% max. 3% max. ≤125kHz 3kVAC / 1 minute -20°C to +50°C 75°C max. 85% RH max. Epoxy UL94V-0 167g 170g 30x10³ hours 70 x 10³ hours max. EN55015 FCC18A UL8750, cUL8750 EN61347-2-13:2006 EN61347-1:2008 J61347-1(H20), J61347-2-13(H21), J55015(H20) 14AWG or 2.5mm² 5.5mm connector Current Limit, Automatic Restart Full Load 110~160% Tj=110°C Automatic Restart REV: 0/2015 RoHS 2011/65/EU 6/6 E340696 EN61347-2-13 Certified UL-8750 Certified cUL-8750 Certified RACV30 Note: All LED Drivers may not be used without a load. They must be switched on the primary side only. Noncompliance may damage the LED or reduce its lifetime. Refer to Application Notes www.recom-power.com RACV30 Series LIGHTLINE AC/DC-Converter Characteristic Maximum Number of LED drivers per circuit breakers Condition Circuit Breaker 115VAC, 1Ohm 90° phase angle 230VAC, 1Ohm 90° phase angle 277VAC, 1Ohm 90° phase angle Circuit Breaker Current Typ 10A 16A 20A 25A C 32 48 57 72 B 24 38 46 58 C 38 62 74 92 B 28 44 53 66 C 44 71 84 106 Package Style and Pinning 17 cable clamp 50 Tc 42 5.5mm socket x 2.1mm 33 Cable entry with strain relief cable clamp RACV30 152 Connections 22 160 CN1 Function L VAC in (L) N VAC in (N) CN2 Function + LED+ - LED- 5.5mm Socket* Function Pin LED+ Shell LED- Tolerance XX = +/-1mm XX.X = */-0.5mm The product information and specifications are subject to change without prior notice. RECOM products are not authorized for use in safety-critical applications (such as life support) without RECOM’s explicit written consent. A safety-critical application is defined as an application where a failure of a RECOM product may reasonably be expected to endanger or cause loss of life, inflict bodily harm or damage property. The buyer shall indemnify and hold harmless RECOM, its affiliated companies and its representatives against any damage claims in connection with the unauthorized use of RECOM products in such safety-critical applications. www.recom-power.com REV: 0/2015 L-45