Features ● ● ● ● ● ● LED DRIVER Universal AC Input 90-295VAC 250mA, 350mA, 500mA, 700mA Output Constant Current Operation Isolation 3.75kVAC Overcurrent and Short Circuit Protection IP67 Rated LIGHTLINE AC/DC-Converter with 3 year Warranty Selection Guide Part Number Rated Power (W) Output Current (mA) Output Voltage (VDC) Constant Current Range (VDC) Efficiency RACD07-250 7 250 28 14 - 28 75% RACD07-350 7 350 21 10 - 20 70% RACD07-500 7 500 14.5 5 - 14.5 70% RACD07-700 7 700 11 3 - 10.5 70% (min.) 7 Watt Single Output Specifications (measured at 115VAC / 230VAC and 25°C ambient temperature) Input Voltage Range 90-295 VAC or 120-415VDC Rated Power 7W nom. Input Frequency Range 47-63Hz ±3% typ. / ±7% max. Current Accuracy Output Current Ripple 30mAp-p typ. Voltage Accuracy (includes load, line and tolerance) ±5% AC Input Current 0.2A Start-up Time <1S Hold-Up Time 18ms min. Operating Frequency 45kHz Isolation Voltage 3.75kVAC / 1 minute Short Circuit Protection Continuous Over Current Protection Constant Current Mode Protection Overload Protection No Load Voltage E340696 UL 8750 Certified EN 61347 Certified EN 61347-2-13 Certified RACD07 105% - 120% typ. RACD07-250 29.3V RACD07-350 21.8V RACD07-500 15.1V RACD07-700 11.9V Output Overvoltage Protection Zener Diode Clamp Storage Humidity 10% - 90% RH Operating Humidity 20% - 90% RH Non-Condensing Operating Temperature Range Ambient Temperature (free air convection) Case Temperature -20°C to +40°C 65°C max. Storage Temperature Range -40°C to +80°C IP Rating IP67 Isolation Resistance 100MΩ / 500VDC at 25°C PCB Material (UL94V-0) Plastic Resin with Fibreglass Case Material (UL94V-0) Plastic Weight 74g Dimension 57 x 41 x 24mm Packing Quantity 25pcs continued on next page www.recom-power.com RoHS 2011/65/EU 6/6 REV: 0/2015 Refer to Application Notes L-23 RACD07 Series LIGHTLINE AC/DC-Converter Specifications (measured at 115VAC / 230VAC and 25°C ambient temperature) Certifications UL General Safety (E340696) UL8750 (based on 1310) General Safety (Report 1201032E-01) EN61347-1 LVD Safety (Report PSE101-0791) EN61347-2-13 EMC Immunity (Report 1307026E-01) EN61547 EMC Harmonics (Report 1307026E-01) EN61000-3-2 EMC Flicker (Report 1307026E-01) EN61000-3-3 EMC Emissions (Report 1307026E-01) EN55015 Design Lifetime 70 x 10³ hours max. MTBF (+25°C) using MIL-HDBK 217F 200 x 10³ hours min. Notes: 1. All LED Drivers may not be used without a load. They must be switched on the primary side only. Noncompliance may damage the LED or reduce its lifetime. 2. The use of a circuit breaker with C-characteristic is recommended. Typical Characteristics Input Voltage vs. Output Load Load Maximum Number of LED drivers per circuit breakers Ta=25°C Condition 100% RACD07 80% 115VAC, 1Ohm 90° phase angle 60% 40% 230VAC, 1Ohm 90° phase angle 20% 90100 115 130 180 220 240 277VAC, 1Ohm 90° phase angle 264 Input Voltage (VAC) Circuit Breaker Circuit Breaker Current Typ 10A 16A 20A 25A C 101 128 171 228 B 61 100 121 150 C 121 164 221 291 B 70 115 139 172 C 139 188 254 334 Package Style & Pinning 57.0 49.0 150 ± 10 UL1007 18AWG 17.0 40.8 11.0 Tc LED+ (Red) LED- (Black) R2 UL1007 18AWG Wire Function Red LED+ Black LED- Brown VAC in (L) Blue VAC in (N) L (Brown) N (Blue) 4.5 Wire Connections Tolerance XX.X = +/- 0.2mm 24.0 2.0 The product information and specifications are subject to change without prior notice. RECOM products are not authorized for use in safety-critical applications (such as life support) without RECOM’s explicit written consent. A safety-critical application is defined as an application where a failure of a RECOM product may reasonably be expected to endanger or cause loss of life, inflict bodily harm or damage property. The buyer shall indemnify and hold harmless RECOM, its affiliated companies and its representatives against any damage claims in connection with the unauthorized use of RECOM products in such safety-critical applications. L-24 REV: 0/2015 www.recom-power.com