PSM-G,PSM-D Data sheet Pressure sensor module/Gauge,Differential Features . . . . Applications . Industrial instrumentation Accuracy, 1.0 FS . Pressure switch, Pneumatic device Volt level output Piggy-back style, pre-amplified and pre-compensated module . Medical device Pre-calibration of offset voltage and span Part number for ordering PSM C - 005KP G Model PSM Rated pressure(Pa) Available pressure media No mark : Non-corrosive gas only C : Non-corrosive gas and liquid Pressure type Pressure type G : Gauge(Positive pressure) GV : Gauge(Negative pressure) GW : Gauge(Bipolar pressure) D : Differential(Positive pressure) DV : Differential(Negative pressure) DW : Differential(Bipolar pressure) Gauge pressure PSM-G Differential pressure PSM-D Piggy-back style module Piggy-back style module Model Package configuration Measurable pressure range (kPa) 100 100 0 100 0 50 0 100 0 200 Part number for ordering PSMC-100KPGW PSMC-100KPGV PSMC-050KPG PSMC-100KPG PSMC-200KPG PSM-100KPGW PSM-100KPGV PSM-050KPG PSM-100KPG PSM-200KPG PSM-100KPDW PSM-100KPDV PSM-050KPD PSM-100KPD PSM-200KPD Specifications Model/Rated pressure 100KPGW 100KPDW Recommended operating conditions Pressure type Rated pressure 100 1020 100 100 100KPGV 100KPDV 050KPG 050KPD 100KPG 100KPD Gauge pressure 100 50 100 1.020 0.510 1.020 0 100 0 50 0 100 PSM : Non-corrosive gas only, PSMC : Non-corrosive gas and liquid 5 0.25 Measurable pressure range Pressure media 1 Excitation voltage Absolute maximum rating Maximum load pressure Twice of rated pressure Maximum excitation voltage 8 Operating temperature 20 100 Storage temperature 40 120 Operating humidity 30 80 (No dew condensation) Electric performances/characteristics (Excitation voltage Vcc=5.0V constant, Ambient temperature Ta=25 ) Current consumption less than 5 Mechanical response time 2 (For the reference) 0.5 ( 100kPa) 0.5 (0kPa) 0.5 (0kPa) 0.5 (0kPa) Output voltage 2, 3 4.5 (100kPa) 4.5 ( 100kPa) 4.5 (50kPa) 4.5 (100kPa) Full scale span voltage 3 4.0 Offset voltage 2, 3 0.5 0.04 Full scale span voltage 2, 3 4.5 0.04 Accuracy 3 1.0 Note ; 1) Please consult us available liquid pressure media when you choose the C models. 2) Output refers to pressure at pressure port 2. 3) Excluding input voltage error. 1 200KPG 200KPD Unit 200 2.040 0 200 kPa kg/cm2 kPa VDC VDC RH mA msec 0.5 (0kPa) V 4.5 (200kPa) V V V FS/0 50 PSM-G,PSM-D Data sheet Pressure sensor module/Gauge,Differential Outline dimensions 12 17.8 7 PSM-G unit (mm) 3max Pressure port Labelled faceplate ELECTRICAL PIN CONNECTIONS 22.86 900mil Vcc NO PIN Vout NC NC NC NC NC NC NC NC GND 11.5 12 3 22.9 PIN NO. SYMBOL Pressure sensor 0.25 8 9 6 1 14 7max 15max Recommended footprint for PCB 11- 1.8 (Diameter of lands) 0.5 2.54 PSM-D 20 12 7 unit (mm) 3max Pressure port 2 Labelled faceplate ELECTRICAL PIN CONNECTIONS 2 3.3 Pressure port 1 2.54 unit(mm) 22.9 12.7 2.54 5 2.54 2.54 2.54 2.54 7 4.8 1.6 11- 0.9 (Diameter of through holes) 22.86 900mil Vcc NO PIN Vout NC NC NC NC NC NC NC NC GND Pressure sensor 0.8 7.5 1 14 6 5 R0.5 6max 11max 2.5 6 0.25 11.5 8 22.9 PIN NO. SYMBOL Recommended footprint for PCB 11- 1.8 (Diameter of lands) 0.5 2.54 12.7 2.54 5 Note ; Please read instruction “Notes” before using the sensor. Fujikura reserves the right to change specifications without notice. If you have any questions regarding technical issues or specifications, please contact us. Sensor Engineering Department 5-1 Kiba 1-chome, Koto-ku, Tokyo 135-8512, Japan Phone +81-(0)3-5606-1072 Fax. +81-(0)3-5606-1538 2 E-mail : [email protected] 22.9 2.54 2.54 2.54 2.54 2.54 7 4.8 1.6 11- 0.9 (Diameter of through holes) unit(mm)