PSM-G,PSM-D Data sheet Pressure sensor module/Gauge,Differential Features . . . . Applications . . . . . Low pressure measurable ( 1kPa, 2kPa, 5kPa) Volt level output Piggy-back style, pre-amplified and pre-compensated module Pre-calibration of offset voltage and span Part number for ordering Industrial instrumentation Pressure switch, Pneumatic device Medical device HVAC Pressure leak down check PSM - 005KP G Model PSM Pressure type Pressure type GW : Gauge(Bipolar pressure) DW : Differential(Bipolar pressure) G : Gauge(Positive pressure) D : Differential(Positive pressure) Rated pressure(Pa) Gauge pressure PSM-G Differential pressure PSM-D Package configuration Piggy-back style module Piggy-back style module Measurable pressure range (kPa) 1 1 2 2 5 5 0 2 0 5 0 10 PSM-001KPGW PSM-002KPGW PSM-005KPGW PSM-002KPG PSM-005KPG PSM-010KPG Model Part number for ordering PSM-001KPDW PSM-002KPDW PSM-005KPDW PSM-002KPD PSM-005KPD PSM-010KPD Specifications 001KPGW 002KPGW 005KPGW 002KPG 005KPG 001KPDW 002KPDW 005KPDW 002KPD 005KPD Recommended operating conditions Pressure type Gauge pressure Differential pressure 1 2 5 2 5 Rated pressure 10 20 51 20 51 Measurable pressure range 1 1 2 2 5 5 0 2 0 5 Pressure media 1 Non-corrosive gas only Excitation voltage 5 0.25 Absolute maximum rating Maximum load pressure 27 Maximum excitation voltage 7 Operating temperature 20 100 Storage temperature 40 120 Operating humidity 30 80 (No dew condensation) Electric performances/characteristics (Excitation voltage Vcc=5.0V constant, Ambient temperature Ta=25 ) Current consumption less than 5 Mechanical response time less than 2 0.5( 1kPa) 0.5( 2kPa) 0.5( 5kPa) 0.5(0kPa) 0.5(0kPa) Output voltage 1,2 4.5(+1kPa) 4.5(+2kPa) 4.5(+5kPa) 4.5(+2kPa) 4.5(+5kPa) Full scale span voltage 2 4.0 Offset voltage 1,2 2.5 0.2 2.5 0.12 2.5 0.08 2.5 0.2 2.5 0.12 Full scale span voltage 1,2 4.5 0.2 4.5 0.12 4.5 0.08 2.5 0.2 4.5 0.12 Accuracy 2 5.0 3.0 2.0 5.0 3.0 Model/Rated pressure Note ; 1)Output refers to pressure at pressure port 2. 2)Excluding input voltage error. 1 010KPG 010KPD Unit 10 102 0 10 kPa g/cm2 kPa VDC kPa VDC RH mA msec 0.5(0kPa) V 4.5(+10kPa) 2.5 0.08 4.5 0.08 2.0 V V V FS/0 50 PSM-G,PSM-D Data sheet Pressure sensor module/Gauge,Differential Outline dimensions 12 17.8 7 PSM-G ELECTRICAL PIN CONNECTIONS unit(mm) 3max Pressure port PIN NO. SYMBOL 22.86 900mil Vcc NO PIN Vout NC NC NC NC NC NC NC NC GND 11.5 12 3 22.9 Labelled faceplate Pressure sensor 0.25 8 9 6 1 7max 15max 14 Recommended footprint for PCB 11- 1.8 (Diameter of lands) 2.54 12.7 2.54 5 7 ELECTRICAL PIN CONNECTIONS unit(mm) 3max Pressure port 2 PIN NO. SYMBOL Labelled faceplate 2 3.3 22.86 900mil Vcc NO PIN Vout NC NC NC NC NC NC NC NC GND 11.5 8 22.9 Pressure port 1 Pressure sensor 0.8 7.5 1 14 6 5 R0.5 Recommended footprint for PCB 6max 11max 2.5 6 0.25 11- 1.8 (Diameter of lands) 0.5 2.54 12.7 2.54 5 22.9 2.54 2.54 7 4.8 1.6 11- 0.9 (Diameter of through holes) 2.54 2.54 2.54 PSM-D unit(mm) 22.9 20 12 2.54 0.5 2.54 2.54 2.54 2.54 7 4.8 1.6 11- 0.9 (Diameter of through holes) unit(mm) Transfer Function Vout=Vs (P + ) (Pressure Error Temperature Error Multiplier Vs=5.0volts P=Input Pressure(kPa) Temperature Error Multiplier=1 Model 001KPGW(DW) 002KPGW(DW) 005KPGW(DW) 002KPG(D) 005KPG(D) 010KPG(D) pressure range 1 1kPa 2 2kPa 5 2kPa 0 2kPa 0 5kPa 0 10kPa Vs) 0.4 0.2 0.08 0.4 0.16 0.08 Note ; Please read instruction “Notes” before using the sensor. Fujikura reserves the right to change specifications without notice. If you have any questions regarding technical issues or specifications, please contact us. Sensor Engineering Department 5-1 Kiba 1-chome, Koto-ku, Tokyo 135-8512, Japan Phone +81-(0)3-5606-1072 Fax. +81-(0)3-5606-1538 2 E-mail : [email protected] 0.5 0.5 0.5 0.1 0.1 0.1 Pressure Error(kPa) 0.1 0.12 0.2 0.1 0.15 0.2