X3GM-3,X3GM-6 Data sheet Pre-amplified/3V Excitation/Gauge Features . . . . . Applications . Industrial instrumentation . Pressure switch, Pneumatic device . Medical device 3V excitation, Battery operation available Volt level output On-chip amplification and temperature compensations Pre-calibration of offset voltage and span Non-corrosive liquid measurable (X3GMC only) Part number for ordering X3GM C - 3 050KP G S R Terminal leads direction (See Outline Diagram) R: Rated Pressure (Pa) Model Length of the pressure port X3GM Terminal leads configuration 3 : 3mm S : Surface mount package Available pressure media Pressure type 6 : 6mm No mark : Non-corrosive gas only G : Gauge (Positive pressure) C : Non-corrosive gas and liquid GV : Gauge (Negative pressure) (Contact us about availability) GW : Gauge (Bipolar pressure) Pressure type Gauge pressure X3GM-3 X3GM-6 Package configuration Surface mount package, 3mm pressure port Surface mount package, 6mm pressure port Measurable pressure range (kPa) 100 100 0 100 0 50 0 100 0 200 0 1000 X3GM-3100KPGWSR X3GM-3100KPGVSR X3GM-3050KPGSR X3GM-3100KPGSR X3GM-3200KPGSR X3GM-3001MPGSR Model Part number for ordering X3GM-6100KPGWSR X3GM-6100KPGVSR X3GM-6050KPGSR X3GM-6100KPGSR X3GM-6200KPGSR X3GM-6001MPGSR Specifications Model/Rated pressure 100KPGW 100KPGV 050KPG 100KPG 200KPG Recommended operating conditions Pressure type Gauge pressure 100 100 50 100 200 Rated pressure 1.020 1.020 0.510 1.020 2.040 Measurable pressure range 100 100 0 100 0 50 0 100 0 200 Pressure media 1 XFGM : Non-corrosive gas only, XFGMC : Non-corrosive gas and liquid Excitation voltage 3.0 0.15 Absolute maximum rating Maximum load pressure Twice of rated pressure Maximum excitation voltage 6 Operating temperature 10 80 Storage temperature 20 100 Operating humidity 30 80 (No dew condensation) Electric performances/characteristics (Excitation voltage Vcc=3.0V constant, Ambient temperature Ta=25 ) Current consumption less than 6 Output impedance less than 10 Source current less than 0.1 Sink current less than 1 Mechanical response time 2 (For the reference) Full scale span voltage 1.5 Offset voltage 1.2 0.5 0.075 Full scale span voltage 1.2 2.0 0.075 Accuracy 1.2 5.0 Note ; 1) Please consult us available when you choose the C models. 2) Excluding input voltage error. 1 001MPG Unit 1000 10.20 0 1000 kPa kg/cm2 kPa VDC 1.5times of rated pressure VDC RH mA mA mA msec V V V FS/0 50 X3GM-3,X3GM-6 Data sheet Pre-amplified/3V Excitation/Gauge Outline dimensions Unit : mm X3GM-3 2.54 2.54 0.8 Pressure port 2 6 5 3 7 1 4 7 3 Vent hole 0.25 X. 6.5 MA 15 0.8 3.5 0.15 3 Index Recommended footprint for PCB 10.3 5 4 Labelled faceplate 1.7 1 2.54 2.54 1.4 6 1 2 9.4 Land-pads 3 (Unit : mm) Unit : mm X3GM-6 2.54 2.54 0.8 Pressure port 2 6 5 3 7 1 4 7 Vent hole 3 10.3 6 5 4 2-R0.5 3.5 Recommended footprint for PCB 2- 1(Holes for projections) 1.4 1.7 1 Projections 1 2 3 Labelled faceplate Land-pads 6.0 Projections 2.54 2.54 0.8 MA 0.5 X. 15 0.25 9.5 6 Index 6.0 9.4 (Unit : mm) 2 Pre-amplified/3V Excitation/Gauge X3GM-3,X3GM-6 Data sheet Connection diagram X3GM-3, X3GM-6 Vcc(DC3V) Vcc Vout Vout GND C2 C1 Remarks : 1)C1 : Connect 680pF capacitor within 2cm distance from leads. 2) C2 : Connect 0.01 F or more capacitor within 2cm distance from leads. GND 3)4 and 5 pins must be No Connection. Open them as floating ones completely, and do NOT connect to other line or each other. Transfer Function Vout=Vs (P + ) (Pressure Error Temperature Error Multiplier Vs) Vs=3.0volts Notes ; The output voltage (Vout) is no perfect ratiometric with the power supply voltage. P=Input Pressure(kPa) Model 050KPG(D) 100KPG(D) 100KPGV 100KPGW(DW) 200KPG(D) 001MPG(D) 115KPA pressure range 0 50kPa 0 100kPa 0 100kPa 100 +100kPa 0 200kPa 0 1MPa 15 115kPa.abs 0.01 0.005 0.005 0.0025 0.0025 0.0005 0.005 Temperature Error Multiplier=1 Note ; Please read instruction “Notes” before using the sensor. Fujikura reserves the right to change specifications without notice. If you have any questions regarding technical issues or specifications, please contact us. Sensor Engineering Department 5-1 Kiba 1-chome, Koto-ku, Tokyo 135-8512, Japan Phone +81-(0)3-5606-1072 Fax. +81-(0)3-5606-1538 3 E-mail : [email protected] 0.1667 0.1667 0.1667 0.4167 0.1667 0.1667 0.09167 Pressure Error(kPa) 2.5 5.0 5.0 10.0 10.0 50.0 5.0