Filename: tfs 1255a.doc Version 1.1 Vectron International 05.04.2013 Filter specification TFS 1255A 1/5 Measurement condition Ambient temperature: Input power level: Terminating impedance: Input: Output: 23 0 °C dBm 50 Ω 50 Ω Characteristics Remark: The maximum attenuation in the pass band is defined as the insertion loss ae. The nominal frequency fN is fixed at 1255.0 MHz without any tolerance or limit. The values of absolute attenuation aabs are guaranteed for the whole operating temperature range. The frequency shift of the filter in the operating temperature range is included in the production tolerance scheme. Data typ. value Insertion loss ae Nominal frequency 3.2 dB tolerance / limit max. 4.0 fN Passband PB PB 1 dB 1255.0 MHz fN ± 30.0 MHz fN ± 25.0 MHz Pass band variation within PB 1 0.4 dB max. 1.5 dB Pass band variation within PB 0.7 dB max. 2.5 dB Absolute attenuation aabs 10 MHz … 1000 MHz 33 dB min. 30 dB 1000 MHz … 1160 MHz 38 dB min. 30 dB 1350 MHz … 2000 MHz 40 dB min. 30 dB 2000 MHz … 3000 MHz 37 dB min. 30 dB 7 ns ns Group delay ripple . 1230 MHz … 1262 MHz 5 ns max. 1225 MHz … 1285 MHz 10 ns max. 15 VSWR within PB 1.5 : 1 max. 2.2 : 1 Input power level in PB - max. 10 - - 40 °C ... + 85°C Operating temperature range OTR Storage temperature range Temperature coefficient of frequency TCf * -72 dBm - 45 °C ... + 85°C ppm/K - *) ∆fc(Hz) = Tcf(ppm/K) x (T - To) x fCAT (MHz) Generated: Checked / Approved: Vectron International GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] Vectron International GmbH reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filename: tfs 1255a.doc Version 1.1 Vectron International 05.04.2013 Filter specification TFS 1255A 2/5 Filter characteristic 0 0 -10 magnitude in dB magnitude in dB -20 -40 -60 -20 -30 -40 -50 -80 -60 -100 500 1000 1500 frequency in MHz 2000 2500 3000 -70 1100 1150 1200 1250 frequency in MHz 1300 1350 1400 Construction and pin connection (All dimensions in mm) 5 6 4 1,2 Max. C55A ● D14 1 Ground Input Ground Ground Output Ground Date code: D E F ... Year + week 2013 2014 2015 3 2 Date code 3 0,75 0,30X0,30 1 3,0 +/-0,15 1 2 3 4 5 6 6 0,6 4 0,6 50 Ω Test circuit L1 2 5 L2 SAW 1, 3, 4, 6 Vectron International GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] Vectron International GmbH reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filename: tfs 1255a.doc Version 1.1 Vectron International 05.04.2013 Filter specification TFS 1255A 3/5 Stability characteristics, reliability After the following tests the filter shall meet the whole specification: 1. Shock: 500g, 1 ms, half sine wave, 3 shocks each plane; DIN IEC 68 T2 - 27 2. Vibration: 10 Hz to 500 Hz, 0.35 mm or g respectively, 1 octave per min, 10 cycles per plane, 3 planes; DIN IEC 68 T2 - 6 3. Change of temperature: 4. Resistance to solder heat (reflow): -55 °C to 125°C / 30 min. each / 10 cycles DIN IEC 68 part 2 – 14 Test N reflow possible: three times max.; for temperature conditions refer to the attached "Air reflow temperature conditions" on page 4; This filter is RoHS compliant (2002/95/EG, 2005/618/EG) Packing Tape & Reel: IEC 286 – 3, with exception of value for N and minimum bending radius; tape type II, embossed carrier tape with top cover tape on the upper side; max. pieces of filters per reel: reel of empty components at start: reel of empty components at start including leader: trailer: 3000 min. 300 mm min. 500 mm min. 300 mm Pull Off Direction Tape (all dimensions in mm) W : 8,00 ± 0,3 Po : 4,00 ± 0,1 Do : 1,50 +0,1/-0 E : 1,75 ± 0,1 F : 3,50 ± 0,05 G(min) : 0,75 P2 : 2,00 ± 0,05 P1 : 4,00 ± 0,1 D1(min) : 1,50 Ao : 3,25 ± 0,1 Bo : 3,25 ± 0,1 Ct : 5,3 ± 0,1 P1 t Po P2 W G Ct Bo F G E Do PIN Marker Ko Date Code Typ D1 Ao W 2 Reel (all dimensions in mm) A : 180 W1 : 8,4 +1,5/-0 W2(max) : 14,4 N(min) : 60 C : 13,0 ± 0,2 C A N W 1 The minimum bending radius is 45 mm. Vectron International GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] Vectron International GmbH reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filename: tfs 1255a.doc Version 1.1 Vectron International 05.04.2013 Filter specification TFS 1255A 4/5 Air reflow temperature conditions Conditions Average ramp-up rate (30°C to 217°C) > 100°C > 150°C > 217°C Peak temperature Time within 5°C of actual peak temperature Cool-down rate (Peak to 50°C) Time from 30°C to Peak temperature Exposure less than 3°C/second between 300 and 600 seconds between 240 and 500 seconds between 30 and 150 seconds max. 260°C between 10 and 30 seconds less than 6°C/second no greater than 300 seconds Chip-mount air reflow profile Temperature / °C max. 260°C 217°C max. 300 s 10 ... 30 s Time / s 30 ... 150 s Vectron International GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] Vectron International GmbH reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filename: tfs 1255a.doc Vectron International Version 1.1 Filter specification 05.04.2013 TFS 1255A 5/5 History: Version Reason of changes Name Date 1.0 - Generation of development specification S.Springfeldt 12.03.2013 1.1 - Generation of filter specification S.Springfeldt 05.04.2013 Vectron International GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] Vectron International GmbH reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.