Filename: tfs 2457.doc Version 2.3 Vectron International 24.04.2014 Filter specification TFS 2457 1/5 Measurement condition Ambient temperature: Input power level: Terminating impedance: Input: Output: 23 0 °C dBm 50 Ω 50 Ω Characteristics Remark: The attenuation at the nominal frequency fN is defined as the insertion loss ae. The nominal frequency fN is fixed at 2457.6 MHz without any tolerance or limit. The values of absolute attenuation aabs and insertion loss ae are guaranteed for the whole operating temperature range. The frequency shift of the filter in the operating temperature range is included in the production tolerance scheme. Data typ. value Insertion loss ae Nominal frequency fN Centre frequency fC Bandwidth 3 4.0 dB tolerance / limit max. - 5.0 2457.6 2429.6 MHz 171.4 MHz dB MHz BW dB Absolute attenuation - aabs @ 1230.46 MHz 45 dB min. 35 dB @ 3691.40 MHz 37 dB min. 33 dB @ 4921.87 MHz 30 dB min. 25 dB @ 6152.33 MHz 25 dB min. 10 dB @ 7382.81 MHz 16 dB Input power level Operating temperature range OTR Storage temperature range Temperature coefficient of frequency TCf * max. 10 dBm - -40 °C ... +90 °C - -45 °C ... +95 °C -72 ppm/K *) ∆f(Hz) = TCf(ppm/K) x (T-T0) x fTo(MHz). No relevant temperature-induced charge generation. Generated: Checked / Approved: Vectron International GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] Vectron International GmbH reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filename: tfs 2457.doc Version 2.3 Vectron International 24.04.2014 Filter specification TFS 2457 2/5 Filter characteristic 0 0 -1 -10 -2 -3 magnitude in dB magnitude in dB -20 -30 -4 -5 -6 -40 -7 -8 -50 -9 -60 2000 3000 4000 5000 frequency in MHz 6000 -10 2330 7000 2350 2370 2390 2410 2430 2450 frequency in MHz 2470 2490 2510 2530 Construction and pin connection (All dimensions in mm) 6 7 5 W57 ● E17 8 2 1 4 Ground Input Ground Ground Ground Output Ground Ground Date code: E F G ... Year + week 2014 2015 2016 3 1 ,0 +/-0,15 Date code 0,6 +/-0,15 7 3 ,0 +/-0,15 3 0,6 +/-0,15 1 ° 60 1 2 3 4 5 6 7 8 5 0,6 +/-0,15 3 ,0 +/-0,15 50 Ω Test circuit L1 2 6 L2 SAW 1, 3, 4, 5, 7, 8 Vectron International GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] Vectron International GmbH reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filename: tfs 2457.doc Version 2.3 Vectron International 24.04.2014 Filter specification TFS 2457 3/5 Stability characteristics, reliability After the following tests the filter shall meet the whole specification: 1. Shock: 500g, 1 ms, half sine wave, 3 shocks each plane; DIN IEC 68 T2 - 27 2. Vibration: 10 Hz to 500 Hz, 0.35 mm or 5 g respectively, 1 octave per min, 10 cycles per plane, 3 planes; DIN IEC 68 T2 - 6 3. Change of temperature: 4. Resistance to solder heat (reflow): -55 °C to 125°C / 15 min. each / 100 cycles DIN IEC 68 part 2 – 14 Test N reflow possible: three times max.; for temperature conditions refer to the attached "Air reflow temperature conditions" on page 4; This filter is RoHS compliant (2011/65/EU) Packing Tape & Reel: IEC 286 – 3, with exception of value for N and minimum bending radius; tape type II, embossed carrier tape with top cover tape on the upper side; max. pieces of filters per reel: reel of empty components at start: reel of empty components at start including leader: trailer: 3000 min. 300 mm min. 500 mm min. 300 mm Pull Off Direction Tape (all dimensions in mm) W : 8,00 ± 0,3 Po : 4,00 ± 0,1 Do : 1,50 +0,1/-0 E : 1,75 ± 0,1 F : 3,50 ± 0,05 G(min) : 0,75 P2 : 2,00 ± 0,05 P1 : 4,00 ± 0,1 D1(min) : 1,50 Ao : 3,25 ± 0,1 Bo : 3,25 ± 0,1 Ct : 5,3 ± 0,1 P1 t PIN Marker Po P2 W G Ct Bo F G E Do Ko Date Code Typ D1 Ao W 2 Reel (all dimensions in mm) A : 180 W1 : 8,4 +1,5/-0 W2(max) : 14,4 N(min) : 60 C : 13,0 ± 0,2 C A N W 1 The minimum bending radius is 45 mm. Vectron International GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] Vectron International GmbH reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filename: tfs 2457.doc Version 2.3 Vectron International 24.04.2014 Filter specification TFS 2457 4/5 Air reflow temperature conditions Conditions Average ramp-up rate (30°C to 217°C) > 100°C > 150°C > 217°C Peak temperature Time within 5°C of actual peak temperature Cool-down rate (Peak to 50°C) Time from 30°C to Peak temperature Exposure less than 3°C/second between 300 and 600 seconds between 240 and 500 seconds between 30 and 150 seconds max. 260°C between 10 and 30 seconds less than 6°C/second no greater than 300 seconds Chip-mount air reflow profile Temperature / °C max. 260°C 217°C max. 300 s 10 ... 30 s Time / s 30 ... 150 s Vectron International GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] Vectron International GmbH reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filename: tfs 2457.doc Vectron International Version 2.3 Filter specification 24.04.2014 TFS 2457 5/5 History Version Reason of Changes Name Date 1.0 Generation of development specification. Channaa 07.03.2011 2.0 Typo in 3691,4MHz corrected, add typical values. Add filter characteristic, generation of filter specification. Channaa 30.06.2011 2.1 Change remark. Channaa 23.12.2011 2.2 Remark corrected. Molke 14.12.2012 2.3 Remark changed. Filter characteristic updated. Schönbein 24.04.2014 Vectron International GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] Vectron International GmbH reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.