TFS1226

Filename: tfs 1226.doc
Version 1.3
Vectron International
04.02.2014
Filter specification
TFS 1226
1/5
Measurement condition
Ambient temperature:
Input power level:
Terminating impedance: *
Input:
Output:
23
0
°C
dBm
338 Ω || -1.6 pF
338 Ω || -1.6 pF
Characteristics
Remark:
The maximum attenuation in the passband is defined as the insertion loss . The nominal frequency fN is fixed at 1226.85 MHz without any tolerance or limit.
The values of absolute attenuation aabs are guaranteed for the whole operating temperature range. The frequency shift of the filter in the operating
temperature range is included in the production tolerance scheme.
Data
typ. value
Insertion loss
ae
4.5
Nominal frequency
fN
-
dB
MHz
MHz
MHz
MHz
MHz
MHz
6.5
dB
MHz
fN ±
1.0
MHz
dB
max.
2.0
dB
dB
dB
dB
dB
dB
dB
min.
min.
min.
min.
min.
min.
35
18
10
10
20
30
dB
dB
dB
dB
dB
dB
-
max.
0
dBm
-
- 31 °C ... + 85 °C
0.7
aabs
Absolute attenuation
1000
1205
1221
1232
1233
1236
max.
1226.85
Passband
Passband variation
tolerance / limit
...
...
...
...
...
...
1205
1221
1222
1333
1236
1500
MHz
MHz
MHz
MHz
MHz
MHz
39
24
25
25
45
37
Input power level
Operating temperature range
OTR
Storage temperature range
Temperature coefficient of frequency
TCf **
- 0.051
- 45 °C ... + 90 °C
ppm/K2
-
*) The terminating impedances depend on parasitics and q-values of matching elements and the board used, and are to be understood as
reference values only. Should there be additional questions do not hesitate to ask for an application note or contact our design team.
**) ∆fc(Hz) = Tcf(ppm/K2) x (T - To)2 x fT0 (MHz).
Generated:
Checked / Approved:
Vectron International GmbH
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
E-Mail: [email protected]
Vectron International GmbH reserves the right to make changes to the product(s) and/or information contained herein without notice.
No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or
information.
Filename: tfs 1226.doc
Version 1.3
Vectron International
04.02.2014
Filter specification
TFS 1226
2/5
0
0
-10
-0.5
-20
-1
-30
-1.5
magnitude in dB
magnitude in dB
Filter characteristic
-40
-50
-60
-2
-2.5
-3
-70
-3.5
-80
-4
-90
-4.5
-100
1000
1100
1200
1300
frequency in MHz
1400
-5
1500
1224.5 1225 1225.5 1226 1226.5 1227 1227.5 1228 1228.5 1229 1229.5
frequency in MHz
Construction and pin connection
(All dimensions in mm)
C26
● E06
1
2
3
4
5
6
Ground
Input
Ground
Ground
Output
Ground
Date code:
E
F
G
...
Year + week
2014
2015
2016
50 Ω Test circuit
L1
2
5
L2
SAW
C2
C1
1, 3, 4, 6
Vectron International GmbH
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
E-Mail: [email protected]
Vectron International GmbH reserves the right to make changes to the product(s) and/or information contained herein without notice.
No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or
information.
Filename: tfs 1226.doc
Version 1.3
Vectron International
04.02.2014
Filter specification
TFS 1226
3/5
Stability characteristics, reliability
After the following tests the filter shall meet the whole specification:
1. Shock:
500g, 1 ms, half sine wave, 3 shocks each plane;
DIN IEC 68 T2 - 27
2. Vibration:
10 Hz to 500 Hz, 0.35 mm or g respectively, 1 octave per min, 10 cycles per
plane, 3 planes; DIN IEC 68 T2 - 6
3. Change of
temperature:
4. Resistance to
solder heat (reflow):
5. ESD
-55 °C to 125°C / 15 min. each / 100 cycles
DIN IEC 68 part 2 – 14 Test N
reflow possible: three times max.;
for temperature conditions, see page 4: "Air reflow temperature conditions"
ANSI/ESD S20.20-1999, class 1A for HBM
This filter is RoHS compliant (2011/65/EU)
Packing
Tape & Reel:
IEC 286 – 3, with exception of value for N and minimum bending radius;
tape type II, embossed carrier tape with top cover tape on the upper side;
max. pieces of filters per reel:
reel of empty components at start:
reel of empty components at start including leader:
trailer:
9000
min. 300 mm
min. 500 mm
min. 300 mm
Pull Off Direction
Tape (all dimensions in mm)
W
: 8,00 ± 0,3
Po
: 4,00 ± 0,1
Do
: 1,50 +0,1/-0
E
: 1,75 ± 0,1
F
: 3,50 ± 0,05
G(min)
: 0,75
P2
: 2,00 ± 0,05
P1
: 4,00 ± 0,1
D1(min)
: 1,50
Ao
: 3,25 ± 0,1
Bo
: 3,25 ± 0,1
Ct
: 5,5 ± 0,1
P1
Date Code
Do
P2
W
G
Ct
Bo
F
G
E
t
Po
Ko
Typ
PIN Marker
D1
Ao
W 2
Reel (all dimensions in mm)
A
: 330
W1
: 8,4 +1,5/-0
W2(max) : 14,4
N(min)
: 50
C
: 13,0 +0,5/-0,2
C
A
N
W 1
The minimum bending radius is 45 mm.
Vectron International GmbH
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
E-Mail: [email protected]
Vectron International GmbH reserves the right to make changes to the product(s) and/or information contained herein without notice.
No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or
information.
Filename: tfs 1226.doc
Version 1.3
Vectron International
04.02.2014
Filter specification
TFS 1226
4/5
Air reflow temperature conditions
Conditions
Average ramp-up rate (30°C to 217°C)
> 100°C
> 150°C
> 217°C
Peak temperature
Time within 5°C of actual peak temperature
Cool-down rate (Peak to 50°C)
Time from 30°C to Peak temperature
Exposure
less than 3°C/second
between 300 and 600 seconds
between 240 and 500 seconds
between 30 and 150 seconds
max. 260°C
between 10 and 30 seconds
less than 6°C/second
no greater than 300 seconds
Chip-mount air reflow profile
Temperature / °C
max.
260°C
217°C
max. 300 s
10 ... 30 s
Time / s
30 ... 150 s
Vectron International GmbH
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
E-Mail: [email protected]
Vectron International GmbH reserves the right to make changes to the product(s) and/or information contained herein without notice.
No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or
information.
Filename: tfs 1226.doc
Vectron International
Version 1.3
Filter specification
04.02.2014
TFS 1226
5/5
History
Version
Reason of Changes
Name
Date
1.0
- Generation of development specification
Strehl
06.02.2009
1.1
- Change OTR and construction and pin connection
S. Channaa
23.02.2009
1.2
- Add typical values and filter characteristic
- Generation of filter specification
S. Channaa
25.11.2009
- Maximum input power updated
Kortenbeutel
04.02.2014
1.3
Vectron International GmbH
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
E-Mail: [email protected]
Vectron International GmbH reserves the right to make changes to the product(s) and/or information contained herein without notice.
No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or
information.