Filename: tfs 751.doc Version 1.3 Vectron International 06.03.2009 Filter specification TFS 751 1/5 Measurement condition Ambient temperature: Input power level: Terminating impedance: Input: Output: 23 0 °C dBm 50 50 Ω Ω Characteristics Remark: The maximum attenuation in the pass band is defined as the insertion loss ae. The nominal frequency fN is fixed at 751,5 MHz without any tolerance or limit. The values of absolute attenuation aabs are guaranteed for the whole operating temperature range. The frequency shift of the filter in the operating temperature range is included in the production tolerance scheme. Data typ. value Insertion loss (reference level) ae 1,7 Nominal frequency fN - PB - Passband p-p Pass band ripple MHz MHz MHz ... ... ... max. fN 3,0 ± dB 751,5 MHz 5,5 MHz 1,5 dB dB max. 35 35 33 dB dB dB min. min. min. 15 20 20 dB dB dB 13 dB min. 10 dB max. 15 dBm arel Absolute attenuation 776 788 806 0,8 dB tolerance / limit 787 805 849 MHz MHz MHz Return loss within PB - Input power level Operating temperature range OTR Storage temperature range Temperature coefficient of frequency TCf * - - 25 °C ... + 85 °C - - 40 °C ... + 85 °C -39 ppm/K - *) ∆fc(Hz) = Tcf(ppm/K) x (T - To) x fCAT (MHz). Generated: Checked / Approved: Vectron International GmbH & Co. KG Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] Vectron International GmbH & Co. KG reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filename: tfs 751.doc Version 1.3 Vectron International 06.03.2009 Filter specification TFS 751 2/5 Filter characteristic 0.179 -1 0.158 -10 -2 0.137 -15 -3 0.116 -20 -4 0.095 -5 0.074 -6 0.053 -35 -7 0.032 -40 -8 0.011 -45 -9 -0.01 -25 -30 -50 651.5 671.5 691.5 711.5 731.5 751.5 771.5 frequency in MHz 791.5 811.5 831.5 -10 731.5 851.5 735.5 739.5 743.5 747.5 751.5 755.5 frequency in MHz 759.5 763.5 767.5 delay in µs 0 -5 magnitude in dB magnitude in dB insertion loss: -1.16 dB 0 -0.031 771.5 Construction and pin connection (All dimensions in mm) 5 6 4 751 ● X08 1,2 Max. Ground Input Ground Ground Output Ground Date code: X A B ... Year + week 2009 2010 2011 3 2 1 1 2 3 4 5 6 Date code 0,1 3 0,75 3 ±0,15 1,5 1 0,6 6 0,6 4 50 Ω Test circuit L1 2 5 L2 SAW 1, 3, 4, 6 Vectron International GmbH & Co. KG Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] Vectron International GmbH & Co. KG reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filename: tfs 751.doc Version 1.3 Vectron International 06.03.2009 Filter specification TFS 751 3/5 Stability characteristics, reliability After the following tests the filter shall meet the whole specification: 1. Shock: 500g, 1 ms, half sine wave, 3 shocks each plane; DIN IEC 68 T2 - 27 2. Vibration: 10 Hz to 500 Hz, 0,35 mm or g respectively, 1 octave per min, 10 cycles per plan, 3 plans; DIN IEC 68 T2 - 6 3. Change of temperature: 4. Resistance to solder heat (reflow): 5. ESD -55 °C to 125°C / 30 min. each / 10 cycles DIN IEC 68 part 2 – 14 Test N reflow possible: three times max.; for temperature conditions refer to the attached "Air reflow temperature conditions" on page 4; ANSI/ESD S20.20-1999, class 1A for HBM This filter is RoHS compliant (2002/95/EG, 2005/618/EG) Packing Tape & Reel: IEC 286 – 3, with exception of value for N and minimum bending radius; tape type II, embossed carrier tape with top cover tape on the upper side; max. pieces of filters per reel: reel of empty components at start: reel of empty components at start including leader: trailer: 9000 min. 300 mm min. 500 mm min. 300 mm Pull Off Direction Tape (all dimensions in mm) W : 8,00 ± 0,3 Po : 4,00 ± 0,1 Do : 1,50 +0,1/-0 E : 1,75 ± 0,1 F : 3,50 ± 0,05 G(min) : 0,75 P2 : 2,00 ± 0,05 P1 : 4,00 ± 0,1 D1(min) : 1,50 Ao : 3,25 ± 0,1 Bo : 3,25 ± 0,1 Ct : 5,5 ± 0,1 P1 Date Code Po Do P2 W G Ct Bo F G E t Ko Typ PIN Marker D1 Ao W 2 Reel (all dimensions in mm) A : 330 W1 : 8,4 +1,5/-0 W2(max) : 14,4 N(min) : 50 C : 13,0 +0,5/-0,2 A C N W 1 The minimum bending radius is 45 mm. Vectron International GmbH & Co. KG Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] Vectron International GmbH & Co. KG reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filename: tfs 751.doc Version 1.3 Vectron International 06.03.2009 Filter specification TFS 751 4/5 Air reflow temperature conditions Conditions Average ramp-up rate (30°C to 217°C) > 100°C > 150°C > 217°C Peak temperature Time within 5°C of actual peak temperature Cool-down rate (Peak to 50°C) Time from 30°C to Peak temperature Exposure less than 3°C/second between 300 and 600 seconds between 240 and 500 seconds between 30 and 150 seconds max. 260°C between 10 and 30 seconds less than 6°C/second no greater than 300 seconds Chip-mount air reflow profile Temperature / °C max. 260°C 217°C max. 300 s 10 ... 30 s Time / s 30 ... 150 s Vectron International GmbH & Co. KG Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] Vectron International GmbH & Co. KG reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filename: tfs 751.doc Vectron International Version 1.3 Filter specification 06.03.2009 TFS 751 5/5 History Version Reason of Changes Name Date 1.0 - Generation of development specification Strehl 04.08.2008 1.1 - Change construction Strehl 12.08.2008 1.2 - typical values and filter characteristics added Pfeiffer 17.02.2009 1.3 - relative attenuation to absolute attenuation changed Pfeiffer 06.03.2009 Vectron International GmbH & Co. KG Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] Vectron International GmbH & Co. KG reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.