Filename: tfs 1569.doc Version 1.2 Vectron International 16.12.2014 Filter specification TFS 1569 1/5 Measurement condition Ambient temperature (T0): Input power level: Terminating impedance: Input: Output: 23 0 °C dBm 50 50 Ω Ω Characteristics Remark: The maximum attenuation in the pass band is defined as the insertion loss ae. The nominal frequency fN is fixed at 1569 MHz without any tolerance or limit. The values of absolute attenuation aabs are guaranteed for the whole operating temperature range. The frequency shift of the filter in the operating temperature range is included in the production tolerance scheme. Data typ. value Insertion loss ae 3.6 Nominal frequency fN - PB - Passband 1.3 Pass band variation dB tolerance / limit max. fN 5.0 ± dB 1569.0 MHz 44.0 MHz dB max. 3.0 dB aabs Absolute attenuation 0.3 MHz … 1400 MHz 31 dB min. 25 dB 1700 MHz … 2500 MHz 34 dB min. 25 dB Group delay ripple within PB 5 ns max. 8 ns Input power level - max. 12 Operating temperature range OTR - 40 °C ... + 85°C - Storage temperature range Temperature coefficient of frequency - TCf * - 74 dBm - 45 °C ... + 85°C ppm/K *) ∆f(Hz) = TCf(ppm/K) x (T-T0) x fTo(MHz) Generated: Checked / Approved: Vectron International GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] Vectron International GmbH reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filename: tfs 1569.doc Version 1.2 Vectron International 16.12.2014 Filter specification TFS 1569 2/5 0 absolute amplitude S21 in dB absolute amplitude S21 in dB -10 -20 -30 -40 0 0.03 -2 0.027 -4 0.024 -6 0.021 -8 0.018 -10 0.015 -12 0.012 -14 0.009 -16 0.006 -18 0.003 GDR S21 in µs Filter characteristic -50 -60 0 250 500 750 1000 1250 1500 frequency in MHz 1750 2000 2250 2500 -20 1470 1490 1510 1530 1550 1570 1590 frequency in MHz 1610 1630 1650 0 1670 Construction and pin connection (All dimensions in mm) 5 6 4 G69 ● E51 1,2 Max. 1 Ground Input Ground Ground Output Ground Date code: E F G ... Year + week 2014 2015 2016 3 2 Date code 0,1 1 3 0,75 1,5 3 ±0,15 1 2 3 4 5 6 6 0,6 4 0,6 50 Ω Test circuit L1 2 5 L2 SAW 1, 3, 4, 6 Vectron International GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] Vectron International GmbH reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filename: tfs 1569.doc Version 1.2 Vectron International 16.12.2014 Filter specification TFS 1569 3/5 Stability characteristics, reliability After the following tests the filter shall meet the whole specification: 1. Shock: 500g, 1 ms, half sine wave, 3 shocks each plane; DIN IEC 68 T2 - 27 2. Vibration: 10 Hz to 500 Hz, 0.35 mm or 5 g respectively, 1 octave per min, 10 cycles per plane, 3 planes; DIN IEC 68 T2 - 6 3. Change of temperature: 4. Resistance to solder heat (reflow): -55 °C to 125°C / 15 min. each / 100 cycles DIN IEC 68 part 2 – 14 Test N reflow possible: three times max.; for temperature conditions refer to the attached "Air reflow temperature conditions" on page 4; This filter is RoHS compliant (2011/65/EU) Packing Tape & Reel: IEC 286 – 3, with exception of value for N and minimum bending radius; tape type II, embossed carrier tape with top cover tape on the upper side; max. pieces of filters per reel: reel of empty components at start: reel of empty components at start including leader: trailer: 3000 min. 300 mm min. 500 mm min. 300 mm Pull Off Direction Tape (all dimensions in mm) W : 8,00 ± 0,3 Po : 4,00 ± 0,1 Do : 1,50 +0,1/-0 E : 1,75 ± 0,1 F : 3,50 ± 0,05 G(min) : 0,75 P2 : 2,00 ± 0,05 P1 : 4,00 ± 0,1 D1(min) : 1,50 Ao : 3,25 ± 0,1 Bo : 3,25 ± 0,1 Ct : 5,3 ± 0,1 P1 Date Code Do P2 W G Ct Bo F G E t Po Ko Typ PIN Marker D1 Ao W 2 Reel (all dimensions in mm) A : 330 or 180 W1 : 8,4 +1,5/-0 W2(max) : 14,4 N(min) : 60 C : 13,0 ± 0,2 C A N W 1 The minimum bending radius is 45 mm. Vectron International GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] Vectron International GmbH reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filename: tfs 1569.doc Version 1.2 Vectron International 16.12.2014 Filter specification TFS 1569 4/5 Air reflow temperature conditions Conditions Average ramp-up rate (30°C to 217°C) > 100°C > 150°C > 217°C Peak temperature Time within 5°C of actual peak temperature Cool-down rate (Peak to 50°C) Time from 30°C to Peak temperature Exposure less than 3°C/second between 300 and 600 seconds between 240 and 500 seconds between 30 and 150 seconds max. 260°C between 10 and 30 seconds less than 6°C/second no greater than 300 seconds Chip-mount air reflow profile Temperature / °C max. 260°C 217°C max. 300 s 10 ... 30 s Time / s 30 ... 150 s Vectron International GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] Vectron International GmbH reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filename: tfs 1569.doc Vectron International Version 1.2 Filter specification 16.12.2014 TFS 1569 5/5 History Version Reason of Changes Name Date 1.0 - Generation of development specification Strehl 20.02.2006 1.1 - Correction of remark - Add typical values and filter characteristic - Generation of filter specification Noack 02.06.2006 - Update data table, filter characteristic and stability characteristics Noack 16.12.2014 1.2 Vectron International GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] Vectron International GmbH reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.