Filename: tfs 1575AD.doc Version 2.1 Vectron International 17.10.2012 Filter specification TFS 1575AD 1/5 Measurement condition Ambient temperature: Input power level: Terminating impedance: Input: Output: 23 0 °C dBm 50Ω 50Ω Characteristics Remark: The maximum attenuation in the pass band is defined as the insertion loss ae. The nominal frequency fN is fixed at 1575.42 MHz without any tolerance or limit. The values of absolute attenuation aabs are guaranteed for the whole operating temperature range. The frequency shift of the filter in the operating temperature range is included in the production tolerance scheme. Data typ. value ae Insertion loss in PB at ambient temperature within OTR dB max. 2.0 dB 1.6 dB max. 2.5 dB 1575.42 PB Passband fN 0.2 Pass band variation dB max. ± MHz 1.023 MHz 1.0 dB aabs Absolute attenuation 1631 2000 1.6 fN Nominal frequency 0,3 tolerance / limit MHz … 1520 MHz 42 dB min. 39 dB MHz MHz … 2000 … 3000 MHz MHz 51 36 dB dB min. min. 39 30 dB dB 13 dB min. 10 dB - max. 0 - - 40 °C ... + 85°C - - 55 °C ... + 105°C Return loss within PB Input power level in PB Operating temperature range OTR Storage temperature range Temperature coefficient of frequency TCf *) -42 dBm ppm/K *) ∆fc(Hz) = Tcf(ppm/K) x (T - To) x fCAT (MHz). Generated: Checked / Approved: Vectron International GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] Vectron International GmbH reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filename: tfs 1575AD.doc Version 2.1 Vectron International 17.10.2012 Filter specification TFS 1575AD 2/5 Filter characteristic 0 0 -10 5 -1 4.6 -2 4.2 -3 3.8 -4 3.4 -5 3 -6 2.6 -7 2.2 -8 1.8 -9 1.4 -30 -40 -50 VSWR magnitude in dB magnitude in dB -20 -60 -70 -80 0 500 1000 1500 frequency in MHz 2000 2500 -10 1535 1543 1551 1559 3000 1567 1575 1583 frequency in MHz 1591 1599 1607 1 1615 Construction and pin connection (All dimensions in mm) 5 6 4 1 2 3 4 5 6 1,2 Max. G75AD ● C42 2 1 3 XXXX=Serial No. 3 0,75 0,30X0,30 1 3,0 +/-0,15 Ground Input Ground Ground Output Ground 6 0,6 Date code: C D E ... 4 0,6 Year + week 2012 2013 2014 50 Ohm Test circuit L1 2 5 L2 SAW 1, 3, 4, 6 Vectron International GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] Vectron International GmbH reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filename: tfs 1575AD.doc Version 2.1 Vectron International 17.10.2012 Filter specification TFS 1575AD 3/5 Stability characteristics, reliability After the following tests the filter shall meet the whole specification: 1. Shock: 500g, 1 ms, half sine wave, 3 shocks each plane; DIN IEC 68 T2 - 27 2. Vibration: 10 Hz to 500 Hz, 0,35 mm or 5 g respectively, 1 octave per min, 10 cycles per plane, 3 planes; DIN IEC 68 T2 - 6 3. Change of temperature: 4. Resistance to solder heat (reflow): 5. ESD -55 °C to 125°C / 30 min. each / 10 cycles DIN IEC 68 part 2 – 14 Test N reflow possible: three times max.; for temperature conditions refer to the attached "Air reflow temperature conditions" on page 4; ANSI/ESD S20.20-1999, class 0 for HBM This filter is RoHS compliant (2002/95/EG, 2005/618/EG) Packing Tape & Reel: IEC 286 – 3, with exception of value for N and minimum bending radius; tape type II, embossed carrier tape with top cover tape on the upper side; max. pieces of filters per reel: reel of empty components at start: reel of empty components at start including leader: trailer: 3000 min. 300 mm min. 500 mm min. 300 mm Pull Off Direction Tape (all dimensions in mm) W : 8,00 ± 0,3 Po : 4,00 ± 0,1 Do : 1,50 +0,1/-0 E : 1,75 ± 0,1 F : 3,50 ± 0,05 G(min) : 0,75 P2 : 2,00 ± 0,05 P1 : 4,00 ± 0,1 D1(min) : 1,50 Ao : 3,25 ± 0,1 Bo : 3,25 ± 0,1 Ct : 5,3 ± 0,1 P1 t PIN Marker Po P2 W G Ct Bo F G E Do Ko Date Code Typ D1 Ao W 2 Reel (all dimensions in mm) A : 180 W1 : 8,4 +1,5/-0 W2(max) : 14,4 N(min) : 60 C : 13,0 ± 0,2 C A N W 1 The minimum bending radius is 45 mm. Vectron International GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] Vectron International GmbH reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filename: tfs 1575AD.doc Version 2.1 Vectron International 17.10.2012 Filter specification TFS 1575AD 4/5 Air reflow temperature conditions Conditions Average ramp-up rate (30°C to 217°C) > 100°C > 150°C > 217°C Peak temperature Time within 5°C of actual peak temperature Cool-down rate (Peak to 50°C) Time from 30°C to Peak temperature Exposure less than 3°C/second between 300 and 600 seconds between 240 and 500 seconds between 30 and 150 seconds max. 260°C between 10 and 30 seconds less than 6°C/second no greater than 300 seconds Chip-mount air reflow profile Temperature / °C max. 260°C 217°C max. 300 s 10 ... 30 s Time / s 30 ... 150 s Vectron International GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] Vectron International GmbH reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filename: tfs 1575AD.doc Vectron International Version 2.1 Filter specification 17.10.2012 TFS 1575AD 5/5 History Version Reason of Changes Name Date 1.0 - Generation of development specification S.Springfeldt 02.03.2012 2.0 - Relaxation of stop band attenuation @2000…3000MHz S.Springfeldt 20.04.2012 2.1 - Generation of filter specification S.Springfeldt 17.10.2012 Vectron International GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] Vectron International GmbH reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.