Filename: tfs 400r.doc Version 2.0 Vectron International 29.05.2012 Filter specification TFS 400R 1/5 Measurement condition Ambient temperature: Input power level: Terminating impedance: Input: Output: 23 0 °C dBm 150 Ω 150 Ω Characteristics Remark: The reference level for the absolute attenuation aabs of the TFS 400R is the attenuation at nominal frequency. This value is defined as the insertion loss ae. The nominal frequency fN is fixed at 400,0 MHz without any tolerance. The values of the absolute attenuation aabs are guaranteed for the whole operating temperature range. The frequency shift of the filter in the operating temperature range is included in the production tolerance scheme. Data typ. value Insertion loss (reference level) ae 2,4 dB tolerance / limit max. 3,5 dB Nominal frequency fN - Centre frequency fC 400,0 MHz 14,6 MHz MHz 65 dB min. 50 dB Bandwidth 3 400,0 MHz BW dB Absolute attenuation - aabs fN ± 100 fN ± 200 MHz 59 dB min. 50 dB fN ± 300 MHz 62 dB min. 50 dB fN + 400 MHz 65 dB min. 50 dB fN + 500 MHz 65 dB min. 50 dB Operating temperature range OTR Storage temperature range Temperature coefficient of frequency TCf * - - 40 °C ... + 85 °C - - 40 °C ... + 85 °C -72 ppm/K *) ∆f(Hz) = TCf(ppm/K) x (T-T0) x fTo(MHz). Material: LiNbO3_64° black, so in principle pyrofree Generated: Checked / Approved: Vectron International GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] Vectron International GmbH reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filename: tfs 400r.doc Version 2.0 Vectron International 29.05.2012 Filter specification TFS 400R 2/5 0 0 -10 -0.5 -20 -1 -30 -1.5 magnitude in dB magnitude in dB Filter characteristic -40 -50 -60 -2 -2.5 -3 -70 -3.5 -80 -4 -90 -4.5 -100 -200 0 200 400 frequency in MHz 600 800 -5 1000 392 394 396 398 400 402 frequency in MHz 404 406 408 Construction and pin connection (All dimensions in mm) 6 7 400R ● C22 8 4 3 2 1 1,2 Max. 5 Date code d. Gr 3,0 +/-0,15 0,6 60 7 0,6 Ground Input Ground Ground Ground Output Ground Ground Date code: C D E ... Year + week 2012 2013 2014 3 1,5 1 1 2 3 4 5 6 7 8 5 0,6 150 Ω Test circuit L1 2 6 L2 SAW 1, 3, 4, 5, 7, 8 Vectron International GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] Vectron International GmbH reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filename: tfs 400r.doc Version 2.0 Vectron International 29.05.2012 Filter specification TFS 400R 3/5 Stability characteristics, reliability After the following tests the filter shall meet the whole specification: 1. Shock: 500g, 1 ms, half sine wave, 3 shocks each plane; DIN IEC 68 T2 - 27 2. Vibration: 10 Hz to 500 Hz, 0,35 mm or 5 g respectively, 1 octave per min, 10 cycles per plane, 3 planes; DIN IEC 68 T2 - 6 3. Change of temperature: 4. Resistance to solder heat (reflow): 5. ESD -55 °C to 125°C / 30 min. each / 10 cycles DIN IEC 68 part 2 – 14 Test N reflow possible: three times max.; for temperature conditions, see page 4: "Air reflow temperature conditions" ANSI/ESD S20.20-1999, class 1A for HBM This filter is RoHS compliant (2002/95/EG, 2005/618/EG) Packing Tape & Reel: IEC 286 – 3, with exception of value for N and minimum bending radius; tape type II, embossed carrier tape with top cover tape on the upper side; max. pieces of filters per reel: reel of empty components at start: reel of empty components at start including leader: trailer: 9000 min. 300 mm min. 500 mm min. 300 mm Pull Off Direction Tape (all dimensions in mm) W : 8,00 ± 0,3 Po : 4,00 ± 0,1 Do : 1,50 +0,1/-0 E : 1,75 ± 0,1 F : 3,50 ± 0,05 G(min) : 0,75 P2 : 2,00 ± 0,05 P1 : 4,00 ± 0,1 D1(min) : 1,50 Ao : 3,25 ± 0,1 Bo : 3,25 ± 0,1 Ct : 5,5 ± 0,1 P1 t Po P2 W G Ct Bo F G E Do PIN Marker Ko Date Code Typ D1 Ao W 2 Reel (all dimensions in mm) A : 330 W1 : 8,4 +1,5/-0 W2(max) : 14,4 N(min) : 50 C : 13,0 +0,5/-0,2 C A N W 1 The minimum bending radius is 45 mm. Vectron International GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] Vectron International GmbH reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filename: tfs 400r.doc Version 2.0 Vectron International 29.05.2012 Filter specification TFS 400R 4/5 Air reflow temperature conditions Conditions Average ramp-up rate (30°C to 217°C) > 100°C > 150°C > 217°C Peak temperature Time within 5°C of actual peak temperature Cool-down rate (Peak to 50°C) Time from 30°C to Peak temperature Exposure less than 3°C/second between 300 and 600 seconds between 240 and 500 seconds between 30 and 150 seconds max. 260°C between 10 and 30 seconds less than 6°C/second no greater than 300 seconds Chip-mount air reflow profile Temperature / °C max. 260°C 217°C max. 300 s 10 ... 30 s Time / s 30 ... 150 s Vectron International GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] Vectron International GmbH reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filename: tfs 400r.doc Vectron International Version 2.0 Filter specification 29.05.2012 TFS 400R 5/5 History Version Reason of Changes Name Date 1.0 - Generation of development specification Channaa 26.11.2010 1.1 - pyrofree statement below data table extended Channaa 3.12.2010 1.2 - Add typical values and filter characteristic - Generation of filter specification Channaa 27.01.2011 - Changed pull off direction from reel Schönbein 29.05.2012 2.0 Vectron International GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] Vectron International GmbH reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.