UNISONIC TECHNOLOGIES CO., LTD 7P30 POWER MOSFET 6.0A, 300V, SWITCHING P-CHANNEL POWER MOSFET DESCRIPTION The UTC 7P30 is a P-channel MOS Field Effect Transistor. it uses UTC’s advanced technology to provide the customers with high switching speed and a minimum on-state resistance. The UTC 7P30 is suitable for high voltage switching applications. FEATURES * RDS(ON)<1Ω @ VGS=-10V, ID=-3.0A * High switching speed * Low input capacitance SYMBOL ORDERING INFORMATION Ordering Number Lead Free Halogen Free 7P30L-TA3-T 7P30G-TA3-T Note: Pin Assignment: G: Gate D: Drain S: Source Package TO-220 Pin Assignment 1 2 3 G D S Packing Tube MARKING INFORMATION PACKAGE MARKING TO-220 www.unisonic.com.tw Copyright © 2014 Unisonic Technologies Co., Ltd 1 of 5 QW-R502-918.C 7P30 POWER MOSFET ABSOLUTE MAXIMUM RATING (TA=25°C) PARAMETER Drain-Source Voltage Gate-Source Voltage SYMBOL RATINGS UNIT VDSS -300 V VGSS ±30 V -6.0 A DC ID(DC) Drain Current Pulsed (Note 2) ID(pulse) -24 A Single Avalanche Current (Note 3) IAS -6.0 A Single Avalanche Energy (Note 3) EAS 180 mJ PD1 35 W TC=25°C Power Dissipation TA=25°C PD2 2.0 W Channel Temperature TCH 150 °C Storage Temperature Range TSTG -55~+150 °C Notes: 1. Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. 2. Pw≤10µs, Duty cycle≤1%. 3. Starting TCH=25°C, RG=25Ω, VGS=-20V→0. ELECTRICAL CHARACTERISTICS (TA=25°C) PARAMETER OFF CHARACTERISTICS Drain-Source Leakage Current Gate-Source Leakage Current SYMBOL IDSS Forward Reverse IGSS TEST CONDITIONS VDS=-300V, VGS=0V VGS=+30V, VDS=0V VGS=-30V, VDS=0V ON CHARACTERISTICS Gate Threshold Voltage VGS(TH) VDS= VGS, ID=-250μA Static Drain-Source On-State Resistance RDS(ON) VGS=-10V, ID=-3.0A DYNAMIC PARAMETERS Input Capacitance CISS Output Capacitance COSS VGS=0V, VDS=-10V, f=1.0MHz Reverse Transfer Capacitance CRSS SWITCHING PARAMETERS Total Gate Charge QG Gate to Source Charge QGS VGS=-10V, VDD=-200V, ID=-6.0A Gate to Drain Charge QGD Turn-ON Delay Time tD(ON) Rise Time tR VDD=-125V, VGS(ON)=-10V, ID=-3.0A, RG=10Ω, RL=42Ω Turn-OFF Delay Time tD(OFF) Fall-Time tF SOURCE-DRAIN DIODE RATINGS AND CHARACTERISTICS Diode Forward Voltage VSD IF=-6.0A, VGS=0V Body Diode Reverse Recovery Time tRR IF=-6.0A, VGS=0V, di/dt=50A/µs Body Diode Reverse Recovery Charge QRR UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MIN TYP MAX UNIT -1.0 µA +100 nA -100 nA -2.0 -4.5 1 V Ω 1040 360 70 pF pF pF 23.1 7.1 12.9 24 16 47 14 nC nC nC ns ns ns ns 3.4 155 930 V ns nC 2 of 5 QW-R502-918.C 7P30 POWER MOSFET TEST CIRCUITS AND WAVEFORMS 2 EAS= 1 2 LIAS VDS RG BVDSS BVDSS-VDD BVDSS ID L IAS -10V ID(t) DUT tP VDD VDD VDS(t) tP Unclamped Inductive Switching Test Circuit UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw Time Unclamped Inductive Switching Waveforms 3 of 5 QW-R502-918.C 7P30 POWER MOSFET TYPICAL CHARACTERISTICS Drain Current, -ID(uA) Drain Current, -ID(uA) Drain-Souce On-State Resistance Characteristics 4 Drain Current vs. Souce to Drain Voltage 7 6 3 5 4 2 3 2 1 1 0 0 0 1 1.5 2 2.5 0.5 3 Drain to Source Voltage, -VDS(V) 3.5 0 2 3 4 1 5 Souce to Drain Voltage,-VSD (V) 6 Maximum Safe Operating Area Operation in this Area is United by RDM 100µs 101 1ms DC 100 Notes: 1.TC=25°C 2.TJ=150°C 3.Single Pulse 10-1 0 10 101 102 Drain-Source Voltage, -VDS (V) UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 4 of 5 QW-R502-918.C 7P30 POWER MOSFET UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 5 of 5 QW-R502-918.C