10-FZ06NBA075FU10-M304L78 target datasheet flow Boost0 600V / 75A Features flow0 12mm housing ● symmetric booster ● ultra fast switching frequency ● low inductance layout Target Applications Schematic ● solar inverter ● UPS Types ● 10-FZ06NBA075FU10-M304L78 Maximum Ratings Tj=25°C, unless otherwise specified Parameter Condition Symbol Value Unit 600 V 58 76 A 225 A 111 169 W ±20 V 10 480 µs V Tjmax 175 °C VRRM 600 V Input Boost IGBT Collector-emitter break down voltage DC collector current Repetitive peak collector current VCE IC ICpulse Power dissipation per IGBT Ptot Gate-emitter peak voltage VGE Short circuit ratings tSC VCC Maximum Junction Temperature Tj=Tjmax Th=80°C Tc=80°C tp limited by Tjmax Tj=Tjmax Th=80°C Tc=80°C Tj≤125°C VGE=15V Input Boost FWD Peak Repetitive Reverse Voltage DC forward current IF Tj=Tjmax Repetitive peak forward current IFRM tp limited by Tjmax Power dissipation per Diode Ptot Tj=Tjmax Maximum Junction Temperature copyright by Vincotech Tjmax Th=80°C Tc=80°C 90 180 Th=80°C Tc=80°C 100 175 1 A A W °C Revision: 1 10-FZ06NBA075FU10-M304L78 target datasheet Maximum Ratings Tj=25°C, unless otherwise specified Parameter Condition Symbol Value Unit Thermal Properties Storage temperature Tstg -40...+125 °C Operation temperature under switching condition Top -40...+(Tjmax - 25) °C 4000 V min 12,7 mm Insulation Properties Insulation voltage Vis t=2s DC voltage Creepage distance copyright by Vincotech 2 Revision: 1 10-FZ06NBA075FU10-M304L78 target datasheet Characteristic Values Parameter Conditions Symbol VGE [V] or VGS [V] Vr [V] or VCE [V] or VDS [V] Value IC [A] or IF [A] or ID [A] Unit Tj Min Typ Max Tj=25°C Tj=150°C Tj=25°C Tj=150°C Tj=25°C Tj=150°C Tj=25°C Tj=150°C 3,5 4,5 6 2,15 2,25 2,75 Input Boost IGBT Gate emitter threshold voltage VGE(th) Collector-emitter saturation voltage VCE(sat) 15 Collector-emitter cut-off current incl. Diode ICES 0 600 Gate-emitter leakage current IGES ±20 0 Integrated Gate resistor Rgint Input capacitance Cies Output capacitance Coss Reverse transfer capacitance Crss Gate charge QGate Thermal resistance chip to heatsink per chip RthJH VCE=VGE 0,00025 75 250 400 Tj=25°C f=1MHz 0 30 Tj=25°C V V µA nA none Ω 4000 pF 400 pF 115 15 400 75 Tj=25°C Thermal grease thickness ≤50µm, λ=1W/mK 94 nC 0,85 K/W Input Boost FWD Diode forward voltage Peak reverse recovery current Reverse recovery time VF 70 Tj=25°C Tj=125°C 1 2 1,5 2,7 V IRRM A trr ns Reverse recovered charge Qrr µC Reverse recovered energy Erec mWs Thermal resistance chip to heatsink per chip RthJH Thermal grease thickness ≤50µm, λ=1W/mK 0,9 K/W Thermistor Rated resistance Rnom Power dissipation P Power dissipation constant copyright by Vincotech Tj=25°C Tj=125°C 20 640 22 750 Tj=25°C B25/100 4000 3 24 880 kΩ Ω 200 mW K Revision: 1 10-FZ06NBA075FU10-M304L78 target datasheet Ordering Code and Marking - Outline - Pinout Ordering Code & Marking Version without thermal paste 12mm housing Ordering Code 10-FZ06NBA075FU10-M304L78 in DataMatrix as M304L78 in packaging barcode as M304L78 Outline Pinout copyright by Vincotech 4 Revision: 1 10-FZ06NBA075FU10-M304L78 target datasheet PRODUCT STATUS DEFINITIONS Datasheet Status Target Preliminary Final Product Status Definition Formative or In Design This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. The data contained is exclusively intended for technically trained staff. First Production This datasheet contains preliminary data, and supplementary data may be published at a later date. Vincotech reserves the right to make changes at any time without notice in order to improve design. The data contained is exclusively intended for technically trained staff. Full Production This datasheet contains final specifications. Vincotech reserves the right to make changes at any time without notice in order to improve design. The data contained is exclusively intended for technically trained staff. DISCLAIMER The information given in this datasheet describes the type of component and does not represent assured characteristics. For tested values please contact Vincotech.Vincotech reserves the right to make changes without further notice to any products herein to improve reliability, function or design. Vincotech does not assume any liability arising out of the application or use of any product or circuit described herein; neither does it convey any license under its patent rights, nor the rights of others. LIFE SUPPORT POLICY Vincotech products are not authorised for use as critical components in life support devices or systems without the express written approval of Vincotech. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, or (c) whose failure to perform when properly used in accordance with instructions for use provided in labelling can be reasonably expected to result in significant injury to the user. 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. copyright by Vincotech 5 Revision: 1