P-511-670(V:2) PD104SLL Version: 2.0 TECHNICAL SPECIFICATION MODEL NO : PD104SLL The content of this information is subject to be changed without notice. Please contact E Ink or its agent for further information. Customer’s Confirmation Customer Date By E Ink’s Confirmation Approve By Confirmed By Prepared By The information contained herein is the exclusive property of E Ink Holdings Inc., and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of E Ink Holdings Inc. Page:1 P-511-670(V:2) PD104SLL Revision History Issued Date Rev. 1.0 2013-09-02 2.0 2013-11-06 Revised Content New Modify Page 10 7-2) Recommended Driving Condition for Back Light Note 7-3 ILED=60mA→50mA The information contained herein is the exclusive property of E Ink Holdings Inc., and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of E Ink Holdings Inc. Page:2 P-511-670(V:2) PD104SLL TECHNICAL SPECIFICATION CONTENTS NO. ITEM PAGE - Cover 1 - Revision History 2 - Contents 3 1 Application 4 2 Features 4 3 Mechanical Specifications 4 4 Mechanical Drawing of TFT-LCD module 5 5 Input Terminals 7 6 Absolute Maximum Ratings 9 7 Electrical Characteristics 9 8 Power On Sequence 15 9 Optical Characteristics 16 10 Handling Cautions 19 11 Reliability Test 20 12 Block Diagram 21 13 Packing 22 The information contained herein is the exclusive property of E Ink Holdings Inc., and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of E Ink Holdings Inc. Page:3 P-511-670(V:2) PD104SLL 1.Application This data sheet applies to a color TFT LCD module, PD104SLL. PD104SLL module applies to OA product, car TV(must use Analog to Digital drive board), which require high quality flat panel display. If you must use in high reliability environment can’t over reliability test condition E Ink assume no responsibility for any damage resulting from the use of the device which dose not comply with the instructions and the precautions in these specification sheet. 2. Features . Amorphous silicon TFT LCD panel with High Brightness LED back-light unit . Pixel in stripe configuration . Slim and compact, designed for O/A application . Display Colors:262,144 colors . +3.3V DC supply voltage for TFT LCD panel driving . Wide Viewing Angle 3.Mechanical Specifications Parameter Screen Size Display Format Display Colors Active Area Pixel Pitch Pixel Configuration Outline Dimension Weight Back-light Surface treatment Display mode Gray scale inversion direction Specifications 10.4 (diagonal) 800×(R, G, B)×600 262,144 211.2(H)×158.4 (V) 0.264 (H)×0.264 (V) Stripe 243.0 (w)×185.1(H)×10.72(typ.) (D) 470±20 32-middle power LED Anti-glare and EWV Normally white 12 o’clock [ ref to Note 9-1 ] Unit inch dot mm mm mm g The information contained herein is the exclusive property of E Ink Holdings Inc., and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of E Ink Holdings Inc. Page:4 P-511-670(V:2) PD104SLL Gray scale inversion direction 4. Mechanical Drawing of TFT-LCD Module The information contained herein is the exclusive property of E Ink Holdings Inc., and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of E Ink Holdings Inc. Page:5 P-511-670(V:2) PD104SLL The information contained herein is the exclusive property of E Ink Holdings Inc., and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of E Ink Holdings Inc. Page:6 P-511-670(V:2) PD104SLL 5.Input Terminals 5-1) TFT-LCD Panel Driving Connector type: MSA24038P Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Symbol VDD VDD GND GND IN0IN0+ IN1IN1+ IN2IN2+ CLKCLK+ R/L U/D Function Power supply : +3.3V Power supply : +3.3V Ground Ground Pixel data Transmission pair 0 (negative -) Pixel data Transmission pair 0 (positive +) Pixel data Transmission pair 1 (negative -) Pixel data Transmission pair 1 (positive +) Pixel data Transmission pair 2 (negative -) Pixel data Transmission pair 2 (positive +) Sampling Clock (negative -) Sampling Clock (positive +) Horizontal Image Shift-direction Select Signal Vertical Image Shift-direction Select Signal Remark Note5-1 Note5-1 Note 5-1 The information contained herein is the exclusive property of E Ink Holdings Inc., and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of E Ink Holdings Inc. Page:7 P-511-670(V:2) PD104SLL Recommended Transmitter (THC63LVDM63A Thine) to PD104SLL interface Assignment : To PD104SLL Input terminal of Graphic controller output signal interface Output signal THC63LVDM63A terminal(Symbol) symbol Symbol No. Symbol Function TIN0 44 R0 Red pixel data (LSB) TIN1 45 R1 Red pixel data TIN2 47 R2 Red pixel data Tout0No.5 : IN0TIN3 48 R3 Red pixel data TIN4 1 R4 Red pixel data Tout0+ No.6 : IN0+ TIN5 3 R5 Red pixel data(MSB) TIN6 4 G0 Green pixel data (LSB) TIN7 6 G1 Green pixel data TIN8 7 G2 Green pixel data TIN9 9 G3 Green pixel data Tout1No.7 : IN1TIN10 10 G4 Green pixel data TIN11 12 G5 Green pixel data(MSB) Tout1+ No.8 : IN1+ TIN12 13 B0 Blue pixel data(LSB) TIN13 15 B1 Blue pixel data TIN14 16 B2 Blue pixel data TIN15 18 B3 Blue pixel data TIN16 19 B4 Blue pixel data Tout2No.9 : IN2TIN17 20 B5 Blue pixel data(MSB) TIN18 22 HSYNC Horizontal sync signal Tout2+ N0.10 : IN2+ TIN19 23 VSYNC Vertical sync signal TIN20 25 DENB Compound Synchronization signal TCLK outNo.11 : CLK TCLK in 26 CLK Data sampling clock TCLK out+ No.12 : CLK + Data stream of IN0-/+, IN1-/+ and IN2-/+ for PD104SLL LVDS Interface Block Diagram LCD Internal Circuit Signal Processor LVDS interface TTL parallel to LVDS Graphic Controller Circuit The information contained herein is the exclusive property of E Ink Holdings Inc., and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of E Ink Holdings Inc. Page:8 P-511-670(V:2) PD104SLL 5-2) Backlight driving Connector type : “BHSR-02VS-1” of Japan Solderless Terminal MFG Co. LTD Pin No Symbol Description Remark 1 + Input terminal (Anode) Wire color : Red 2 - Input terminal (Cathode) Wire Color : Black 6.Absolute Maximum Ratings: Parameters Supply Voltage Symbol VDD MIN. -0.3 GND=0V, Ta=25℃ Unit Remark V MAX. +4.0 7.Electrical Characteristics 7-1) Recommended Operating Conditions: Item Symbol Supply Voltage VDD Current Dissipation IDD LVDS Differential input high threshold VTH LVDS Differential input low threshold VTL Min. 3.0 -100 GND = 0V,Ta = 25℃ Max. Unit Remark 3.6 V 380 mA Note 7-1 100 mV Note 7-2 - Typ. 3.3 190 - Note 7-1 : To test the current dissipation of VDD, using the “color bars” testing pattern shown as below 1 2 3 4 5 6 7 8 1. 2. 3. 4. 5. 6. 7. 8. White Yellow Cyan Green Magenta Red Blue Black Idd current dissipation testing pattern Note 7-2 :Please refers to THC63LVDF63A specification by THINE Corporation. module conforms to LVDS standard. This LCD The information contained herein is the exclusive property of E Ink Holdings Inc., and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of E Ink Holdings Inc. Page:9 P-511-670(V:2) PD104SLL 7-2) Recommended Driving Condition for Back Light Parameter Symbol Supply voltage of LED backlight VLED Min TYP MAX Unit - - (25.6) V Ta = 25℃ Remark Note 7-3 Supply current of LED backlight ILED - (50) - mA Note 7-4 Backlight Power Consumption PLED - - (10.24) W Note 7-3 / Note 7-5 Note 7-3:The ILED=50mA, Customer system design for driving should be constant current. Note 7-4:The LED driving condition is defined for each LED module. (4 LED Serial) Input current = 50mA * 8 = 400mA Note 7-5:PLED = VLED-1 * ILED-1 + VLED-2* ILED-2 ….. + VLED-7 * ILED-7+VLED-8 * ILED-8 (PLED) MAX= (VLED) MAX * (ILED) TYP * Number of LED parallel 7-3) Power Consumption Parameter LCD Panel Power Consumption Symbol Backlight Power Consumption Total Power Consumption - Condition - Typ. 627 - Max. Unit Remark 684 mW Note 7-6 (10.24) W W (11) Note 7-6: The power consumption for back light is not included. The information contained herein is the exclusive property of E Ink Holdings Inc., and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of E Ink Holdings Inc. Page:10 P-511-670(V:2) PD104SLL 7-4) Input / Output signal timing chart (A) Vertical Timing t1 t2 CLK t3 t3 ENAB R5~R0 G5~G0 B5~B0 X,1 X,2 X,3 X,4 X,Y X,598 X,599 X,600 (B) Horizontal Timing tc t3 t4 CLK ENAB 797,Y 799,Y R5~R0 G5~G0 B5~B0 1,Y 2,Y 3,Y 4,Y 5,Y 6,Y 7,Y X,Y 798,Y 800,Y The information contained herein is the exclusive property of E Ink Holdings Inc., and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of E Ink Holdings Inc. Page:11 P-511-670(V:2) PD104SLL t5 t7 t6 VIH(Min):0.8Vcc CLK VIL(Max):0.2Vcc t8 Input Signal CenterLevel: 0.5Vcc t9 ENAB R5-R0 G5-G0 B5-B0 VIH(Min):0.8Vcc VALID DATA a VIL(Max):0.2Vcc b CLK 0.5Vcc Duty ( a ,b ) : 50 ± 10% C) Timing Specifications Item Frame Cycling symbol Min. Typ. Max. t1 - 628 X t3 - - - 16.58 - ms Vertical Display Period t2 - 600 X t3 - Horizontal Scanning Time t3 - 1056 X t5 - - 26.4 - Unit Remark us Horizontal Display Period t4 - 800 X t5 - Clock Cycle t5 - 25 - ns Clock High Level Time t6 - - - ns Clock Low Level Time t7 - - - ns Hold time t8 10 - - ns Setup time t9 8 - - ns The information contained herein is the exclusive property of E Ink Holdings Inc., and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of E Ink Holdings Inc. Page:12 P-511-670(V:2) PD104SLL 7-5) Display Color and Gray Scale Reference Color Input Color Data Green Red Blue R5 R4 R3 R2 R1 R0 G5 G4 G3 G2 G1 G0 B5 B4 B3 B2 B1 B0 Basic Colors Red Green Blue Black Red (63) Green (63) Blue (63) Cyan Magenta Yellow White Red (00) Red (01) Red (02) Darker ↓ Brighter Red (61) Red (62) Red (63) Green (00) Green (01) Green (02) Darker ↓ Brighter Green (61) Green (62) Green (63) Blue (00) Blue (01) Blue (02) Darker ↓ Brighter Blue (61) Blue (62) Blue (63) 0 1 0 0 0 1 1 1 0 0 0 0 1 0 0 0 1 1 1 0 0 0 0 1 0 0 0 1 1 1 0 0 0 0 1 0 0 0 1 1 1 0 0 0 0 1 0 0 0 1 1 1 0 0 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 0 1 0 1 1 0 0 0 0 0 1 0 1 0 1 1 0 0 0 0 0 1 0 1 0 1 1 0 0 0 0 0 1 0 1 0 1 1 0 0 0 0 0 1 0 1 0 1 1 0 0 0 0 0 1 0 1 0 1 1 0 0 0 0 0 0 1 1 1 0 1 0 0 0 0 0 0 1 1 1 0 1 0 0 0 0 0 0 1 1 1 0 1 0 0 0 0 0 0 1 1 1 0 1 0 0 0 0 0 0 1 1 1 0 1 0 0 0 0 0 0 1 1 1 0 1 0 0 0 ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ 1 1 1 0 0 0 1 1 1 0 0 0 1 1 1 0 0 0 1 1 1 0 0 0 0 1 1 0 0 0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 0 0 0 1 1 1 0 0 0 1 1 1 0 0 0 1 1 1 0 0 0 0 1 1 0 0 0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 1 0 ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 The information contained herein is the exclusive property of E Ink Holdings Inc., and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of E Ink Holdings Inc. Page:13 P-511-670(V:2) PD104SLL 7-6) Pixel Arrangement The LCD module pixel arrangement is the stripe. R G B R G B R G B 1 st Line RGB R G B R G B 2 nd Line RGB R G B 3 rd Line RGB 1 st Pixel 800 th Pixel 1 Pixel = R G B RGB 598 th Line RGBRGB RGB 599 th Line RGBRGBRGB 600 th Line RGB RGB The information contained herein is the exclusive property of E Ink Holdings Inc., and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of E Ink Holdings Inc. Page:14 P-511-670(V:2) PD104SLL 8 .Power On Sequence 3.0 V 0 s< t <35 m s 0 s< t <35 m s 3.0 V VDD Signal 2t 1 0<t 1 B acklight 1. The supply voltage for input signals should be same as VDD. 2. When the power is off , please keep whole signals (Hsync,Vsync,DENB,CLK, Data) low level or high impedance. The information contained herein is the exclusive property of E Ink Holdings Inc., and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of E Ink Holdings Inc. Page:15 P-511-670(V:2) PD104SLL 9.) Optical Characteristics 9-1) Specification: Parameter Symbol Condition MIN. Horizontal θ21.22 60 θ(to 12 45 Viewing Angle CR≥10 o’clock) Vertical θ(to 6 35 o’clock) θ=0° Contrast Ratio CR 500 θ=0°/φ=0° 1400 Brightness L Rise Tr θ=0°/φ=0° Response time Fall Tf Luminance Uniformity U 75 x 0.25 θ=0°/φ=0° White Chromaticity y 0.27 Cross Talk Ratio LED Life Time CTK - θ=0°/φ=0° 30000 +25℃ Ta = +25℃ Unit Remarks deg TYP. ±75 MAX. - 60 - deg 50 - deg 600 1700 15 25 80 50 50 - 0.30 0.35 cd/㎡ ms ms % - 0.32 0.37 - - 3.5 - % hrs Note 9-1 Note 9-2 Note 9-3 Note 9-4 Note 9-5 Note 9-6 Note 9-7 All the optical measurement shall be executed 30 minutes after backlight being turn-on. The optical characteristics shall be measured in dark room (ambient illumination on panel surface less than 1 Lux). The measuring configuration shows as following figure. Photometer (TOPCON BM-5A or BM-7 fast) 500 mm +/- 50 mm Field = 1° TFT-LCD module Optical characteristics measuring configuration The information contained herein is the exclusive property of E Ink Holdings Inc., and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of E Ink Holdings Inc. Page:16 P-511-670(V:2) PD104SLL Note 9-1:The definitions of viewing angles are as follows. LED BL connector θ 12 o’clock 3 o’clock 9 o’clock 6 o’clock φ * 12 o’clock Gray scale inversion direction Note 9-2 : The definition of contrast ratio CR = Luminance when Testing point is White Luminance when Testing point is Black Note 9-3:Topcon BM-5A or BM-7 fast luminance meter 1°field of view is used in the testing . Note 9-4: Definition of Response Time Tr and Tf: White Black White 100% 90% Brightness 10% 0% Tr Tf Note 9-5: The uniformity of LCD is defined as U= The Minimum Brightness of the 9 testing Points The Maximum Brightness of the 9 testing Points Luminance meter : BM-5A or BM-7 fast(TOPCON) Measurement distance : 500 mm +/- 50 mm Ambient illumination : < 1 Lux Measuring direction : Perpendicular to the surface of module The information contained herein is the exclusive property of E Ink Holdings Inc., and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of E Ink Holdings Inc. Page:17 P-511-670(V:2) PD104SLL The test pattern is white. 1/6 2/6 2/6 1/6 1/6 Note 9-6: Cross Talk (CTK) = 2/6 YA-YB YA 2/6 1/6 ×100% YA: Brightness of Pattern A YB: Brightness of Pattern B Luminance meter : BM 5A or BM-7 fast (TOPCON) Measurement distance : 500 mm +/- 50 mm Ambient illumination : < 1 Lux Measuring direction : Perpendicular to the surface of module Pattern A Pattern B (Gray Level 31) (Gray Level 31, central black box exclusive) YA YB 1/3 1/3 1/3 1/3 1/3 1/3 Black : Measuring Point (A and B are at the same point.) (Gray Level 0) Note 9-7: The “LED Life time “ is defined as the module brightness decrease to 50% original Brightness that the ambient temperature is 25℃ and ILED = 400mA. The information contained herein is the exclusive property of E Ink Holdings Inc., and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of E Ink Holdings Inc. Page:18 P-511-670(V:2) PD104SLL 10. Handling Cautions 10-1) Mounting of module a) Please power off the module when you connect the input/output connector. b) Polarizer which is made of soft material and susceptible to flaw must be handled carefully. c) Protective film (Laminator) is applied on surface to protect it against scratches and dirt. d) Please following the tear off direction as figure 10-1 to remove the protective film as slowly as possible, so that electrostatic charge can be minimized. 10-2) Precautions in mounting a) When metal part of the TFT-LCD module (shielding lid and rear case) is soiled, wipe it with soft dry cloth. b) Wipe off water drops or finger grease immediately. Long contact with water may cause discoloration or spots. c) TFT-LCD module uses glass which breaks or cracks easily if dropped or bumped on hard surface. Please handle with care. d) Since CMOS LSI is used in the module. So take care of static electricity and earth yourself when handling. 10-3) Adjusting module a) Adjusting volumes on the rear face of the module have been set optimally before shipment. b) Therefore, do not change any adjusted values. If adjusted values are changed, the specifications described may not be satisfied. 10-4) Polarizer mark The polarizer mark is to describe the direction of wide view angle film how to mach up with the rubbing direction. 10-5) Others a) Do not expose the module to direct sunlight or intensive ultraviolet rays for many hours. b) Store the module at a room temperature place. c) The voltage of beginning electric discharge may over the normal voltage because of leakage current from approach conductor by to draw lump read lead line around. d) If LCD panel breaks, it is possibly that the liquid crystal escapes from the panel. Avoid putting it into eyes or mouth. When liquid crystal sticks on hands, clothes or feet. Wash it out immediately with soap. e) Observe all other precautionary requirements in handling general electronic components. f) Please adjust the voltage of common electrode as material of attachment by 1 module. Figure 10-1 the way to peel off protective film The information contained herein is the exclusive property of E Ink Holdings Inc., and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of E Ink Holdings Inc. Page:19 P-511-670(V:2) PD104SLL 11. Reliability Test No Test Item Test Condition 1 High Temperature Storage Test Ta = +80℃, 240 hrs 2 Low Temperature Storage Test Ta = -30℃, 240 hrs 3 High Temperature Operation Test Ta =+70℃, 240 hrs 4 Low Temperature Operation Test Ta = -20℃, 240 hrs High Temperature & High Humidity Ta = +60℃, 90%RH, 240 hrs Operation Test (No Condensation) Thermal Cycling Test -30℃+70℃, 200 Cycles (non-operating) Vibration Test 30min 30min Frequency:10 ~ 57 HZ , Amplitude:0.15 mm,58~500Hz, 1G Sweep time: 11 min (non-operating) Test Period: 3 hrs Shock Test (1 hr for each direction of X, Y, Z) 80G, 6ms, X,Y, Z 5 6 7 8 9 (non-operating) Electron Static Discharge Remark 1 times for each direction C=150pF,R=330Ω Contact=±8KV Air=±15KV 10 times/terminal Ta: ambient temperature Note: The protective film must be removed before temperature test. [Criteria] In the standard conditions, there is not display function NG issue occurred. (including : line defect ,no image). All the cosmetic specification is judged before the reliability stress. The information contained herein is the exclusive property of E Ink Holdings Inc., and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of E Ink Holdings Inc. Page:20 P-511-670(V:2) PD104SLL 12.Block Diagram The information contained herein is the exclusive property of E Ink Holdings Inc., and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of E Ink Holdings Inc. Page:21 P-511-670(V:2) PD104SLL 13.Packing The information contained herein is the exclusive property of E Ink Holdings Inc., and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of E Ink Holdings Inc. Page:22