MPX / PX Series PRODUCT SELECTION Control Voltage AVAILABLE OPTIONS MPX240D5 MPX240D5R PX240D5 PX240D5R MPX240D5 MPX240D5R PX240D5 PX240D5R 12-280 5 0.06 600 250 1.4 260 4.0 500 0.5 12-280 5 0.06 600 250 1.4 260 4.0 500 0.5 12-280 5 0.06 600 250 1.4 260 4.0 500 0.5 12-280 5 0.06 600 250 1.4 260 4.0 500 0.5 MPX240D5 MPX240D5R PX240D5 PX240D5R 3-32 VDC 3.0 VDC 1.0 VDC 1500 Ohm 1/2 Cycle 1/2 Cycle 3-32 VDC 3.0 VDC 1.0 VDC 1500 Ohm 20 µs 1/2 Cycle 3-32 VDC 1.0 VDC 3.0 VDC 1500 Ohm 1/2 Cycle 1/2 Cycle 3-32 VDC 1.0 VDC 3.0 VDC 1500 Ohm 20 µs 1/2 Cycle ol e 3-32 VDC te • Ultra High Surge Current • Random (R) and Zero Voltage Switching • SCR Output AC OUTPUT SPECIFICATIONS (1) Description bs Operating Voltage (47-63Hz) [Vrms] Maximum Load Current [Arms] Minimum Load Current [Arms] Transient Overvoltage [Vpk] Maximum Surge Current (16.6ms) [Apk] Maximum On-State Voltage Drop @ Rated Current [Vpk] Maximum I²t for fusing (8.3 msec) [A² sec] Maximum Off-State Leakage Current @ Rated Voltage [mArms] Minimum Off-State dv/dt @ Maximum Rated Voltage [V/µsec] (2) Minimum Power Factor (with Maximum Load) INPUT SPECIFICATIONS (1) Description Control Voltage Range Must Turn On Voltage Must Turn Off Voltage Nominal Input Impedance Maximum Turn-On Time [msec] Maximum Turn-Off Time [msec] GENERAL SPECIFICATIONS O Description Dielectric Strength, Input/Output/Base (50/60Hz) Minimum Insulation Resistance (@ 500 VDC) Maximum Capacitance, Input/Output Ambient Operating Temperature Range Ambient Storage Temperature Range Weight (typical) Encapsulation GENERAL NOTES 1) All parameters at 25°C unless otherwise noted. 2) 2) Off-state dv/dt test method per EIA/NARM standard RS-443, paragraph 13.11.1 3) Voltage Applied for 1 minute. Parameters 4000 Vrms 109 Ohm 16 pF -30 to 80°C -40 to 125°C 0.4 oz. (11g) Thermally Conductive Epoxy ol e te MECHANICAL SPECIFICATIONS O bs THERMAL DERATE INFORMATION AGENCY APPROVALS UL E16949 Rev. 120210 O te ol e bs O bs ol e te ANNEX - ENVIROMENTAL INFORMATION