PSP-240 Series Features: • Universal AC input / full range • Built in active PFC function • Protections: Short Circuit / Overload / Overvoltage / Over temperature • Cooling by free air convection • DIN rail mountable • UL 508(industrial control equipment)approved • LED indicator for power on • 100% full load burn-in test • Fixed switching frequency at 100KHz • 3 year warranty Specifications OUTPUT Cat. No. PSP-24024 PSP-24048 DC VOLTAGE RATED CURRENT CURRENT RANGE RATED POWER RIPPLE & NOISE (max) 24V 10A 0 ~ 10A 240W 80mVp-p 48V 5A 0 ~ 5A 240W 150mVp-p Ripple & noise are measured at 20MHz of bandwidth by using a 12 twisted pair-wire terminated with a 0.1µF & 47µF parallel capacitor. VOLTAGE ADJ. RANGE VOLTAGE TOLERANCE 24 ~ 28V ±1.0% 48 ~ 53V ±1.0% Tolerance: includes set up tolerance, line regulation and load regulation. INPUT LINE REGULATION LOAD REGULATION SETUP, RISE TIME HOLD UP TIME (Typ.) VOLTAGE RANGE ±0.5% ±1.0% 800ms, 40ms / 230VAC 24ms / 230VAC 85 ~ 264VAC ±0.5% ±1.0% 800ms, 40ms / 115VAC at full load 24ms / 115VAC at full load 120 ~ 370VDC Derating may be needed under low input voltages, please check the derating curve for more detail PROTECTION FREQUENCY RANGE POWER FACTOR (Typ.) EFFICIENCY (Typ.) AC CURRENT (max.) INRUSH CURRENT (Typ.) LEAKAGE CURRENT OVERLOAD 47 ~ 63Hz 0.96 / 230VAC 0.99 / 115VAC at full load 84% 2.8A / 115VAC; 1.4A / 230VAC COLD START 27A / 115VAC 45A / 230VAC ≤ 3.5mA / 240VAC 85% 105 ~ 150% rated output power Protection type: Constant current limiting, recovers automatically after fault condition is removed OVERVOLTAGE 30 ~ 36V 54 ~ 60V Protection type: Shut down overvoltage, re-power on to recover OVERTEMPERATURE ENVIRONMENT SAFETY & EMC 100˚C ± 5˚C (TSW: detect on heat sink of power transistor) Protection type: Shut down overvoltage, recovers automatically after temperature goes down WORKING TEMP. WORKING HUMIDITY STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION MOUNTING -10 ~ +70˚C (Refer to output load derating curve) 20 ~ 90% RH non-condensing -20 ~ +85˚C, 10 ~ 95% RH ±0.03% / ˚C (0 ~ 50˚C) 10 ~ 500Hz, 2G 10min./1cycle, 60 min. each long X,Y, Z axes Compliance to IEC60068-2-6 SAFETY STANDARDS UL508 UL60950-1 EN60950-1 compliant I/P-O/P: 3KVAC I/P-FG: 1.5KVAC O/P-FG: 0.5KVAC I/P-O/P, I/P-FG, O/P-FG: 100M Ohms / 500VDC Compliance to EN55011; EN55022 (CISPR22) Class B Compliance to EN61000-3-2,-3 Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204; EN55024; EN61000-6-2; (EN50082-2); heavy industry level; criteria A WITHSTAND VOLTAGE ISOLATION RESISTANCE EMI CONDUCTION & RADIATION HARMONIC CURRENT EMS IMMUNITY The power supply is considered a component which will installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. OTHERS MTBF DIMENSION PACKING 289.9K hrs min. MIL-HDBK-217K (25˚C) 125.5x125.2x100mm (WxHxD) 1.2Kg; 12pcs / 15.5Kg / 1.29CUFT All parameters NOT specially mentioned are measured at 230V AC input, rated load and 25˚C of ambient temperature. For the latest on Altech Power Supply specifications please visit www.altechcorp.com/power. 96 Mechanical Specification 125.5 100 125.2 LED TB1 3 2 1 1 2 3 TB2 4 3 2 1 Assignment Assignment FG AC/N AC/L 1,2 3,4 Block Diagram EMI FILTER & RECTIFIERS I/P PFC CIRCUIT RECTIFIERS & FILTER POWER SWITCHING FG O.L.P. +V -V CONSTANT CURRENT LIMITING & DETECTION CIRCUIT PWM & PFC CONTROL O.V.P. O.T.P. Derating Curve Output Derating VS Input Voltage Ta=25 100 100 230VAC 90 80 80 60 70 110VAC 60 40 50 20 40 -10 0 10 20 30 40 50 55 60 70 (VERTICAL) Vin: --230VAC 110VAC 85 100 110 135 155 230 264 Note: All dimensions are in millimeters, to convert to inches multiply by 0.03937. Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 97