EDA60 SERIES AC-DC ENCLOSED SWITCHING POWER SUPPLY FEATURES ‧UL / cUL / TUV / CE ‧COMPLY WITH ErP (except 5V model) ‧UNIVERSAL INPUT 88~264VAC ‧SHORT CIRCUIT PROTECTION ‧INTERNAL INPUT FILTER ‧2 YEARS WARRANTY ‧HIGH EFFICIENCY UP TO 89% ‧HIGH AVERAGE EFFICIENCY ‧LOW STANDBY POWER CONSUMPTION R H a UL 60950-1 EN 60950-1 MODEL LIST MODEL NO. INPUT VOLTAGE OUTPUT WATTAGE OUTPUT VOLTAGE OUTPUT CURRENT EFF. (min.) EFF. (typ.) EFF. (avg.) Single Output Models EDA60-05 88~264 VAC 45 WATTS + 5 VDC 9000 mA 80% 82% 81% EDA60-12 88~264 VAC 60 WATTS + 12 VDC 5000 mA 86% 88% 87% EDA60-15 88~264 VAC 60 WATTS + 15 VDC 4000 mA 87% 89% 87% EDA60-24 88~264 VAC 60 WATTS + 24 VDC 2500 mA 87% 89% 87% SPECIFICATION o All Specifications Typical At Nominal Line, Full Load, 25 C Unless Otherwise Noticed GENERAL Conditions Conditions Characteristics min. min. typ. typ. max. max. unit unit Switching frequency Vi nom, Io nom Isolation voltage Input-Output 3000 / 4242 VAC / VDC Input-FG 1500 / 2121 VAC / VDC 100 MΩ 40 Isolation resistance Input-Output, @ 500VDC Ambient temperature *1 Operating at Vi nom o Vi nom, from 61 C to +71 C Storage temperature Non operational -40 Relative humidity Vi nom, Io nom 20 Temperature coefficient Vi nom, Io min MTBF Bellcore Issue 6 @40 oC, GB Cooling 2.5 + 85 o C % / oC o C 95 % RH ± 0.03 % / oC 5V model 570000 Hours 12V model 588000 Hours 15V model 602000 Hours 24V model 615000 Hours IEC 60068-2-13 Dimension KHz + 71 -40 o Derating (see derating curve) Altitude during operation 100 4850 L98 x W82 x D35 m mm Free air convection *1. It is permissible to be lower than -25oC , but minimum load is 2% www.chinfa.com 2010.05.25 [email protected] P1 EDA60 SERIES SPECIFICATION All Specifications Typical At Nominal Line, Full Load, 25oC Unless Otherwise Noticed INPUT SPECIFICATIONS Characteristics Rated input voltage Conditions Io nom Absolute input max. range Input current Vi : 115 / 230 VAC, Io nom Rated input current Vi : 88 VAC, Io nom Line frequency Vi nom, Io nom Inrush current Power dissipation Vi : 115 / 230 VAC , Io nom Leakage current min. typ. unit VAC 100 240 AC in 88 264 VAC DC in 120 375 VDC 1100 / 600 47 Vi : 230 VAC, Io nom mA 1500 mA 63 30 / 60 Hz A 5V model 11 W 12V model 15V model 10 W 9 W 24V model 8 W Input-Output Input-FG Standby power consumption max. Vi nom, Io=0A 0.25 mA 3.5 0.5 mA max. unit +1 % W OUTPUT SPECIFICATIONS Characteristics Conditions min. Output voltage accuracy (Adjusted before shipment) Vi nom, Io max 0 Minimum load Line regulation Vi nom Io nom, Vi min ...Vi max 0 Load regulation Vi nom, Io min ...Io nom Voltage trim range Vi nom, 0.8 Io nom Rated continuous loading Vi nom typ. % ± 0.5 % VDC % 5V model 4.75 ±1 5.5 12V model 15V model 10.8 13.2 VDC 13.5 16.5 VDC 24V model 5V model 27.6 21.6 9 A @ 5Vdc / 8.1 A @ 5.5 Vdc 12V model 15V model 24V model VDC 5 A @ 12Vdc / 4.5 A @ 13.2 Vdc 4 A @ 15Vdc / 3.6 A @ 16.5 Vdc 2.5 A @ 24Vdc / 2.15 A @ 27.6 Vdc Hold up time Vi : 115 / 230 VAC , Io nom Turn on time Vi nom, Io nom 5V, 12V & 15V models 24V model 1500 ms ms 2000 ms Vi nom, Io nom 5V, 12V &15V models : with 7000μF CAP 24V model : with 3500μF CAP 2000 ms 2500 ms 150 ms 500 ms 150 ms Rise time 10 / 80 Vi nom, Io nom Vi nom, Io nom 5V, 12V &15V models : with 7000μF CAP 24V model : with 3500μF CAP Fall time Transient recovery time Vi nom, Io nom Ripple & noise Vi nom, Io nom, BW = 20MHz Power back immunity Vi nom, Io nom 1 second 2 ms 100 mV Vi nom, 1~0.5 Io nom 5V model 7.5 VDC 12V model 15V model 18 VDC 22 35 VDC 24V model 5V, 12V &15V models Capacitor load Vi nom, Io nom Efficiency Vi nom, Io nom, Po / Pi 24V model 7000 VDC μF μF 3500 Up to 89%, See model list and typ efficiency curve CONTROL AND PROTECTION Characteristics Conditions min. Input fuse Internal surge voltage protection Rated over load protection www.chinfa.com 2010.05.25 typ. max. unit T2A / 250VAC internal IEC 61000-4-5 Vi nom (see typ current limited curve) Varistor 110 150 % [email protected] P2 EDA60 SERIES SPECIFICATION All Specifications Typical At Nominal Line, Full Load, 25oC Unless Otherwise Noticed CONTROL AND PROTECTION Characteristics Over voltage protection typ. min. max. unit 5V model 5.75 6.75 VDC 12V model 13.8 16.2 VDC 15V model 17.25 20.25 VDC 24V model 28.8 32.4 VDC Conditions Vi nom, Io nom (Auto Recovery) Output short circuit Hiccup mode APPROVALS AND STANDARDS UL / cUL UL 60950-1 Recognized TUV EN 60950-1, CB scheme CE EN 61000-6-3, EN 55022 Class B, EN 61000-3-2, EN 61000-3-3, EN 61000-6-2, EN 55024 EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN 61000-4-5, EN 61000-4-6, EN 61000-4-8 EN 61000-4-11, ENV 50204, EN 61204-3 Vibration resistance meet IEC 60068-2-6 (10-500 Hz, 2G, along X, Y, Z each Axis, 60 min for each Axis ) Shock resistance meet IEC 60068-2-27 (15G, 11ms, 3 Axis, 6 Faces, 3 times for each Face) PHYSICAL CHARACTERISTICS Case size 98 x 82 x 35 mm (3.86 x 3.23 x 1.38 inches) Case material Metal Weight 310 g MECHANISM & PIN CONFIGURATION mm [inch] 55.00 [2.17] 8.20 [0.32] 9.50 [0.37] 19.50 [0.77] INSTALLATION Ventilation / Cooling Normal convection Connector size range AWG22-14 (0.2~2mm2 ) flexible / solid cable, connector can withstand torque at maximum 12 pound-inches. 2-M3 L=Max 4mm Vout ADJ. 4.00 [0.16] 98.00 [3.86] 5.50 [0.22] 82.00 [3.23] GENERAL TOLERANCE 0.00[0.00] - 30.00[1.18] ±0.30[0.01] 30.00[1.18] - 120.00[4.72] ±0.50[0.02] 5.00 [0.20] 88.5 [3.48] 40.00 [1.57] 40.5 [1.59] 4.40 82.00 [3.23] 87.00 [3.43] 17.00 [0.67] www.chinfa.com 2010.05.25 35.00 [1.38] 2-M3 L=Max 8mm 17.50 [0.69] 3.5 35.00 [1.38] 3.5 28.00 [1.10] 1 L 2 (AC) N 3 4 5 V +V +V Vout AD 74.00 [2.91] [email protected] P3 EDA60 SERIES PIN ASSIGNMENT Designation PIN NO. Input terminals (phase conductor, no polarity at DC input) Input terminals (neutral conductor, no polarity at DC input) IN 2 N V - Negative output terminal V+ Vout ADJ. Positive output terminal DC ON Operation indicator LED Ground this terminal to minimize high-frequency emissions 3 4 5 Description L OTHER OUT 1 Trimmer-potentiometer for Vout adjustment CIRCUIT SCHEMATIC ‧Block diagram for EDA60 series L Fuse Vo + Rectifier Line Filter Inrush Current Switching Limiter and Device Rectifier Vo - N Y Control Circuit FG Opto Isolation Reference & Error Amp. Vout ADJ. TYP. CURRENT LIMITED CURVE Output Voltage [ % ] v EDA60 Hiccup mode 100 50 t Time DERATING CURVE TYP. EFFICIENCY CURVE EDA60-24 90 88 EFFICIENCY [ % ] Power out [ % ] 100 75 0 -40 o 61 Temperature [ C ] www.chinfa.com 2010.05.25 71 86 84 82 80 10 230 Vac 115 Vac 25 50 Power out [ % ] 75 100 [email protected] P4