Model G150N50W4E Flange Mount Termination 150 Watts, 50Ω Description The G150N50W4E is high performance Aluminum Nitride (AlN) flange mount termination intended as a cost competitive alternative to Beryllium Oxide (BeO). The termination is well suited to all cellular frequency bands such as; AMPS, GSM, DCS, PCS, PHS and UMTS. The high power handling makes the part ideal for terminating circulators and for use in power combiners. The termination is also RoHS compliant! General Specifications Thick Film AlN Ceramic Nickel Plated Copper -50 to +150°C (see de rating chart) • 150 Watts Resistive Element Substrate Mounting Flange Operating Temperature • DC – 3.0 GHz Tolerance is ±0.010”, unless otherwise specified. Designed to meet of exceed applicable portions of MIL-E-5400. All dimensions in inches. Features: • RoHS Compliant • AlN Ceramic • Non-Nichrome Resistive Element Electrical Specifications • Low VSWR Resistance Value: Power: Frequency Range: • 100% Tested Return Loss 50 Ohms, ± 2% 150 Watts DC – 3.0 GHz 25dB DC – 2.0 GHz 20dB DC – 3.0 GHz Specification based on unit properly installed using suggested mounting instructions and a 50 ohm nominal impedance. Specifications subject to change. Outline Drawing UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES 1 of 2 USA/Canada: Toll Free: Europe: (315) 432-8909 (800) 544-2414 +44 2392-232392 Model G150N50W4E Typical Performance: G150N50W4E G150N50W4E 110 100 90 0.00 80 1.00 120 70 60 0.50 130 50 140 -5.00 40 150 -10.00 160 Return Loss (dB) -15.00 -20.00 170 -25.00 180 30 0.20 20 10 0.50 1.00 2.00 -0.20 0 0.00 -0.50 -30.00 -170 -10 -1.00 -35.00 -160 -20 -40.00 -150 -45.00 -30 -140 -50.00 0.00 0.50 1.00 1.50 2.00 F [GHz] 2.50 3.00 3.50 -40 -130 -50 -120 -60 -110 Power De-rating: -100 -90 -80 -70 Mounting Footprint and Procedure: *Actual performance could be limited by the solder properties of the application 2 of 2 USA/Canada: Toll Free: Europe: (315) 432-8909 (800) 544-2414 +44 2392-232392