PSMAD65 SERIES Up to 65 Watts AC DC Power Supplies Single Output Rev A Type O: Open Type Type U: U Chassis Type Type C: Enclosed Type Type D: Din Rail Type Size: 3” x 2” x 1.04” Size: 3.53” x 2.38” x 1.31” Size: 3.53” x 2.38” x 1.31” Size: 3.67” x 2.37” x 1.31” OPTIONS FEATURES • Package Type -Open Type -U Chassis Type -Enclosed Type -Din Rail Type • Output Voltage • Protection Class • Universal Input Voltage Range of 85~264VAC • Compact ~3 x ~2 Inch Frame • Low Standby Power Consumption • Built-In Class B EMI Filter • Output Voltages Ranging from 5VDC to 53VDC • 4000VAC Input to Output 2MOPP Insulation APPLICATIONS • • • • • • • • • • • • Low Leakage Current Protection Type Class I and Class II RoHS Compliant Level VI Compliant High Operating Altitude of 5000M ANSI/AAMI ES60601-1, EN60601-1, IEC60601-1 3rd Edition Safety Approvals • Over Voltage, Over Load, and Short Circuit Protection DESCRIPTION Medical Equipment Wireless Network Telecom/Datacom Industry Control System Measurement Equipment Semiconductor Equipment The PSMAD65 series of AC DC power supplies offers up to 65 watts of continuous output power in a compact package. Single output models are available with an input voltage range of 85~264VAC and output voltages ranging from 5VDC to 53VDC. Each model has a built in Class B EMI Filter, low leakage current, and high operating altitude. Models of this series are protected against over voltage, over load, and short circuit conditions, have 4000VAC input to output 2MOPP insulation, and have ANSI/AAMI ES60601-1, EN 60601-1, and IEC60601-1 3rd Edition safety approvals. Four package types are available for this series: open, u-chassis, enclosed, and din rail. Please call factory for ordering details. MODEL SELECTION TABLE Model Number(1) Input Voltage Range Output Voltage Output Current(2) Ripple & Noise No Load Input Power Output Power Efficiency Protection Type PSMAD65-05S-X PSMAD65-7.5S-X PSMAD65-09S-X PSMAD65-12S-X PSMAD65-15S-X PSMAD65-24S-X PSMAD65-24S1-X PSMAD65-28S-X PSMAD65-28S1-X PSMAD65-36S-X PSMAD65-48S-X PSMAD65-53S-X 85~264VAC 85~264VAC 85~264VAC 85~264VAC 85~264VAC 85~264VAC 85~264VAC 85~264VAC 85~264VAC 85~264VAC 85~264VAC 85~264VAC 5VDC 7.5VDC 9VDC 12VDC 15VDC 24VDC 24VDC 28VDC 28VDC 36VDC 48VDC 53VDC 10A 8.67A 7.23A 5.42A 4.34A 2.71A 2.71A 2.33A 2.33A 1.81A 1.36A 1.24A 75 mVp-p 75 mVp-p 75 mVp-p 75 mVp-p 75 mVp-p 75 mVp-p 75 mVp-p 75 mVp-p 75 mVp-p 75 mVp-p 150 mVp-p 150 mVp-p 0.11W 0.11W 0.11W 0.11W 0.11W 0.11W 0.11W 0.11W 0.11W 0.11W 0.11W 0.11W 50W 65W 65W 65W 65W 65W 65W 65W 65W 65W 65W 65W 90% 90% 91% 92.5% 93.5% 93.5% 92% 93.5% 91.5% 92.5% 93% 92.5% Class I Class I Class I Class I Class I Class I Class II Class I Class II Class I Class I Class I 2/23/2016 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 1 of 6 PSMAD65 SERIES Up to 65 Watts AC DC Power Supplies Single Output Rev A SPECIFICATIONS All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. SPECIFICATION TEST CONDITIONS Min Typ Max Unit 264 370 63 1.6 0.9 VAC VDC Hz INPUT SPECIFICATIONS Operating Input Voltage Range Input Frequency Input Current No Load Input Power Leakage Current Input Inrush Current Input Protection OUTPUT SPECIFICATIONS Output Voltage Initial Set Voltage Accuracy Line Regulation AC Input DC Input AC Input 100VAC and Full Load 240VAC and Full Load 230VAC 264VAC 230VAC Internal Fuse in Line and Neutral 85 120 47 230VAC and Full Load Low Line to High Line -1.0 -0.2 -0.7 -0.5 -0.6 -0.4 -20 -10 0.11 75 60 T3.15A/250VAC 5Vout All others 5Vout All Others 53Vout All Others No Load to Full Load Load Regulation 10% Load to 90% Load Voltage Adjustability Single Output Output Power Output Current Minimum Load See Table +1.0 +0.2 +0.7 +0.5 +0.6 +0.4 +10 +10 See Table See Table 0 With a 10µF/25V 1206 X7R MLCC Ripple & Noise (20MHz BW) Transient Response With a 1µF/50V 1206 X7R MLCC With a 0.1µF/100V 1206 X7R MLCC Load step from 50~75% change at 2.5A/µs 5Vout, 7.5Vout, 9Vout, 12Vout, 15Vout 24Vout, 28Vout, 36Vout 48Vout, 53Vout Peak Deviation Recovery Time 3 600 1000 115VAC and Full Load Natural convention with derating MIL-HDBK-217F, Full Load 500VDC 2/23/2016 -40 -40 5 Non-Condensing Isolation Resistance % Vout µs ms +0.02 ms %/ºC Continuous, Automatic Recovery 145 % 125 140 % % of lout rated; Hiccup mode % of Vout(nom); Latch mode 1 minute (2MOPP insulation) % ms 16 -0.02 Isolation Voltage % mVp-p 20 230VAC % % 75 75 150 Rise Time Switching Frequency W µA A % Start-Up Time Hold-Up Time Temperature Coefficient PROTECTION Short Circuit Protection Over Load Protection Over Voltage Protection ENVIRONMENTAL SPECIFICATIONS Operating Ambient Temperature Storage Temperature Range Relative Humidity Operating Altitude Shock Vibration MTBF GENERAL SPECIFICATIONS Efficiency A 5Vout 7.5Vout 9Vout All Others Input to Output Input (Output) to F.G. +85 +85 95 5000 IEC60068-2-27 IEC60068-2-6 1,494,000 See Table 60 80 70 120 4000 2500 0.1 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] ºC ºC %RH M hours kHz VAC GΩ Page 2 of 6 PSMAD65 SERIES Up to 65 Watts AC DC Power Supplies Single Output Rev A SPECIFICATIONS All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. SPECIFICATION TEST CONDITIONS Min Typ Max Unit PHYSICAL SPECIFICATIONS O Type U Type C Type D Type Weight O Type U Type Dimensions (L x W x H) C Type D Type 4.13oz (117g) 5.54oz (157g) 6.07oz (172g) 6.81oz (193g) 3in x 2in x 1.04in (76.2mm x 50.8mm x 26.5mm) 3.53in x 2.38in x 1.31in (89.7mm x 60.5mm x 33.3mm) 3.53in x 2.38in x 1.31in (89.7mm x 60.5mm x 33.3mm) 3.67in x 2.37in x 1.31in (93mm x 60.4mm x 33.3mm) SAFETY & EMC CHARACTERISTICS ANSI/AAMI ES60601-1 EN60601-1 IEC60601-1 Safety Approvals EMI EN55011, EN55022 and FCC Part 18 Harmonic Currents Voltage Flicker ESD Radiated Immunity Fast Transient Surge Conducted Immunity Power Frequency Magnetic Field Dip and Interruptions EN61000-3-2 EN61000-3-3 EN61000-4-2 EN61000-4-3 EN61000-4-4 EN61000-4-5 EN61000-4-6 EN61000-4-8 EN60601-1-2 EN61000-4-11 Conducted Radiated Class B Class B Class A Full Load Air ±8kV and Contact ±6kV 20 V/m ±2kV DM ±1kV and CM±2kV 20 Vr.m.s 10 A/m 230VAC 50Hz 30% 60% >95% >95% 100VAC 50Hz 30% 60% >95% >95% 500mS 100mS 10mS 5000mS 500mS 100mS 10mS 5000mS Perf. Criteria A Perf. Criteria A Perf. Criteria A Perf. Criteria A Perf. Criteria A Perf. Criteria A Perf. Criteria A Perf. Criteria A Perf. Criteria A Perf. Criteria B Perf. Criteria A Perf. Criteria B Perf. Criteria A Perf. Criteria B NOTES (1) (2) 2/23/2016 The last letter in model name indicates package type: “O”= Open Type, “U”= U Chassis Type, “C”= Enclosed Type, or “D”= Din Rail Type “S1” Indicates Protection Type Class II Output Current @Convention cooled 60ºC Ta Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 3 of 6 Rev A PSMAD65 SERIES Up to 65 Watts AC DC Power Supplies Single Output DERATING CURVES 2/23/2016 Derating vs. Ambient Temperature 7.5V, 9V, 28VS1 Derating vs. Ambient Temperature 5V, 12V, 24VS1, 36V, 48V,53V Derating vs. Ambient Temperature 15V, 24V, 28V Derating vs. Input Voltage Efficiency vs. Output Load PSMAD65-24S-O Efficiency vs. Input Voltage PSMAD65-24S-O Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 4 of 6 PSMAD65 SERIES Up to 65 Watts AC DC Power Supplies Single Output Rev A MECHANICAL DRAWINGS 2/23/2016 Type O- Open Type Type D- Din Rail Type C Type- Enclosed Type U Type- U Chassis Type Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 5 of 6 PSMAD65 SERIES Up to 65 Watts AC DC Power Supplies Single Output Rev A CONNECTORS CON1-Input Connector Pin 1 Pin 3 CON2-Output Connector Line Neutral Pin 1,2 Pin 3,4 Mates with: JST Housing: VHR-3N Mounting holes marked with must be JST Crimp Terminals: SVH-21T-P1.1 connected to safety earth for CLASS I application -Vout +Vout Mates with: JST Housing: VHR-4N JST Crimp Terminals: SVH-21T-P1.1 MODEL NUMBER SETUP PS Supply Type MAD 65 Application Output Power Open Frame Medical Application 65W - 24 S 1 Output Voltage Output Quantity Protection Type 05: 5 VDC S: Single - No Suffix: CLASS I 7.5: 7.5 VDC 1: CLASS II O Package Type O: Open Frame U: U-Chassis 09: 9 VDC C: Enclosed 12: 12 VDC D: Din Rail 15: 15 VDC 24: 24 VDC 28: 28 VDC 36: 36 VDC 48: 48 VDC 53: 53 VDC NOTES 1. Models with thru-hole inserts cannot be equipped with a heatsink. 2. Terminal block models (suffix “T”, “TF”, and “TF1”) cannot be equipped with a heatsink. 3. Only 0.200” pin length is available with terminal block options. 4. Models with EMC filter (suffix “TF” and “TF1”) meet EN55011, EN55022 Class A. COMPANY INFORMATION Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development engineers will provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001-2008 certification is just one example of our commitment to producing a high quality, well-documented product for our customers. Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss your future projects. Contact Wall Industries for further information: Phone: Toll Free: Fax: E-mail: Web: Address: 2/23/2016 (603)778-2300 (888)597-9255 (603)778-9797 [email protected] www.wallindustries.com 37 Industrial Drive Exeter, NH 03833 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 6 of 6