Download Data Sheet

PSMAD40 SERIES
40 Watts
AC/DC Power Supplies
Single Output
Rev A
O Type- Open Frame
C Type- Enclosed Type
U Type- U Chassis Type
DN Type- Din Rail Type
Size: 3in x 2in x 1.04in
Size: 3.53in x 2.38in x 1.31in
Size:3.53in x 2.38in x 1.36in
Size: 2.27in x 2.37in x 1.31in
OPTIONS
FEATURES
• Package Type
• Output Voltage
• Class I or Class II
• Wide Input Voltage Range of 85 to
264VAC, 47 to 63Hz
• Built-In Class B EMI Filter
• Adjustable Output Voltage
• 4000VAC Input to Output 2MOPP
Insulation
• Protection Type Class I and Class II
APPLICATIONS
•
•
•
•
•
•
• Low Leakage Current Under 75µA
• Operating Altitude of 5000M
• ANSI/AAMI ES60601-1, EN60601-1, and IEC60601-1 3rd Edition
Safety Approvals
• CE Marked
• RoHS II and REACH Compliant
• Designed to Meet Efficiency Level VI
DESCRIPTION
Medical Equipment
Wireless Network
Telecom/Datacom
Industry Control System
Measurement Equipment
Semiconductor Equipment
The PSMAD40 series of AC/DC medical power supplies provides 40 watts of output power in a compact 2 x 3
inch footprint. These supplies feature a universal 85-264VAC (120~370 VDC) input, enabling them to be used
anywhere in the world. 5V, 7.5V, 9V, 12V, 15V, 24V, 28V, 36V, 48V, and 53V single output voltages are
available for this series, all of which have a maximum 10% adjustment range. These supplies also feature a low
leakage current of less than 75μA at 264VAC and are designed to withstand 4000VAC, input to output. The
PSMAD40 series has an operating temperature range of -40°C to +85°C, and a high efficiency up to 93%. These
supplies are also protected against short circuit, over voltage, and over load conditions. The PSMAD40 series
has ANSI/AAMI ES60601-1, EN60601-1, and IEC60601-1 medical safety approvals, are CE marked, and meet
the conducted and radiated EMI requirements of EN55011, EN55022 and FCC Part 18. The series is designed
to meet Energy Level VI and is pending approval. Open frame, U-chassis, enclosed case, and DIN rail
mechanical options are available. Class I and Class II protection types are also available.
MODEL SELECTION TABLE
Model Number(1)
PSMAD40-05S-x
PSMAD40-075S-x
PSMAD40-09S-x
PSMAD40-12S-x
PSMAD40-12S1-x
PSMAD40-15S-x
PSMAD40-15S1-x
PSMAD40-24S-x
PSMAD40-28S-x
PSMAD40-36S-x
PSMAD40-48S-x
PSMAD40-53S-x
2/22/2016
Input Voltage
Range
Output
Voltage
Output Current(2)
Ripple & Noise
No Load
Input Power
Output Power
Efficiency
85~264VAC
5VDC
7.5VDC
9VDC
12VDC
12VDC
15VDC
15VDC
24VDC
28VDC
36VDC
48VDC
53VDC
8A
5.34A
4.45A
3.34A
3.34A
2.67A
2.67A
1.67A
1.43A
1.12A
0.84A
0.77A
75mVp-p
75mVp-p
75mVp-p
75mVp-p
75mVp-p
75mVp-p
75mVp-p
75mVp-p
75mVp-p
75mVp-p
150mVp-p
150mVp-p
0.11W
0.11W
0.11W
0.11W
0.11W
0.11W
0.11W
0.11W
0.11W
0.11W
0.11W
0.11W
40W
40W
40W
40W
40W
40W
40W
40W
40W
40W
40W
40W
90%
90%
91%
92%
90%
92%
90%
92%
91%
92%
93%
92.5%
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
website: www.wallindustries.com • e-mail: [email protected]
Page 1 of 7
PSMAD40 SERIES
40 Watts
AC/DC Power Supplies
Single Output
Rev A
SPECIFICATIONS
All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted.
We reserve the right to change specifications based on technological advances.
SPECIFICATION
TEST CONDITIONS
Min
Typ
Max
Unit
264
370
63
1.0
0.5
VAC
VDC
Hz
INPUT SPECIFICATIONS
Operating Input Voltage Range
Input Frequency
Input Current
No Load Input Power
Leakage Current
Input Inrush Current
Input Protection
OUTPUT SPECIFICATIONS
Output Voltage
Initial Set Voltage Accuracy
Line Regulation
AC Input
DC Input
AC Input
100VAC and Full Load
240VAC and Full Load
230VAC
264VAC
230VAC
Internal Fuse In Line and Neutral
85
120
47
230VAC and Full Load
Low Line to High Line at Full Load
-1.0
-0.2
-0.7
-0.5
-0.6
-0.4
-20
-10
No Load to Full Load
Load Regulation
10% Load to 90% Load
Voltage Adjustability
Single Output
0.11
75
60
T3.15A/250VAC
5V Models
All Others
5V Models
All Others
5V Models
All Others
Output Power
Output Current
Minimum Load
Ripple & Noise (20MHz bandwidth)
Transient Response
10µF/25V 1206 X7R MLCC
1µF/50V 1206 X7R MLCC
0.1µF/100V 1206 X7R MLCC
Load step from 50~75% change
at 2.5A/µs
See Table
+1.0
+0.2
+0.7
+0.5
+0.6
+0.4
+10
+10
See Table
See Table
0
75
75
150
5V, 7.5V, 9V, 12V, 15V Models
24V, 28V, 36V Models
48V, 53V Models
Peak Deviation
Recovery Time
1000
20
Hold Up Time
Temperature Coefficient
PROTECTION
Short Circuit Protection
Over Load Protection
Over Voltage Protection
ENVIRONMENTAL SPECIFICATIONS
Operating Ambient Temperature
Storage Temperature
Operating Altitude
Relative Humidity
Shock
Vibration
MTBF
GENERAL SPECIFCATIONS
Efficiency
Switching Frequency
115VAC and Full Load
Natural Convection with Derating
5
MIL-HDBK-217F, Full Load
1 minute (2MOPP insulation)
Isolation Resistance
500VDC
2/22/2016
-40
-40
Non-Condensing
Isolation Voltage
%
%Vout
µs
ms
+0.02
ms
%/ºC
Continuous, Automatic Recovery
145
%
125
140
%
% of Iout; Hiccup Mode
% of Vout(nom); Latch Mode
230VAC
%
ms
25
-0.02
%
%
mVp-p
3
Rise Time
W
µA
A
%
600
Start Up Time
A
5V Models
All Others
Input to Output
Input (Output) to F.G)
+85
+85
5000
95
IEC60068-2-27
IEC60068-2-6
3,010,000 hrs
See Table
70
120
4000
2500
0.1
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
website: www.wallindustries.com • e-mail: [email protected]
ºC
ºC
M
%RH
kHz
VAC
GΩ
Page 2 of 7
PSMAD40 SERIES
40 Watts
AC/DC Power Supplies
Single Output
Rev A
SPECIFICATIONS
All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted.
We reserve the right to change specifications based on technological advances.
SPECIFICATION
TEST CONDITIONS
Min
Typ
Max
Unit
PHYSICAL SPECIFICATIONS
O Type: Open Frame Models
C Type: Enclosed Models
U Type: U Chassis Models
DN Type: Din Rail Models
Weight
4.02oz (114g)
5.96oz (169g)
5.43oz (154g)
6.70oz (190g)
3in x 2in x 1.04in
(76.2mm x 50.8mm x 26.5mm)
3.53in x 2.38in x 1.31in
(89.7mm x 60.5mm x 33.3mm)
3.67in x 2.37in x 1.31in
(93mm x 60.4mm x 33.3mm)
O Type: Open Frame Models
Dimensions (L x W x H)
C Type and U Type: Enclosed and U Chassis Models
DN Type: Din Rail Models
SAFETY & EMC CHARACTERISTICS
ANSI/AAMI ES60601-1
EN60601-1
IEC60601-1
Safety Approvals
EMI
EN55011, EN55022 and FCC Part 18
Harmonic Currents
Voltage Flicker
EN61000-3-2
EN61000-3-3
ESD
EN61000-4-2
Radiated Immunity
Fast Transient
EN61000-4-3
EN61000-4-4
Surge
EN61000-4-5
Conducted Immunity
Power Frequency Magnetic Field
EN61000-4-6
EN61000-4-8
Full Load
Air ±8kV
Contact ±6kV
20 V/m
±2kV
DM ±1kV
CM ±2kV
20 Vr.m.s
10 A/m
230VAC 50Hz
Dip and Interruptions
Conducted
Radiated
EN60601-1-2
EN61000-4-11
100VAC 50Hz
Class B
Class B
Class A
Perf. Criteria A
Perf. Criteria A
Perf. Criteria A
Perf. Criteria A
30%
60%
>95%
>95%
30%
60%
>95%
>95%
500mS
100mS
10mS
5000mS
500mS
100mS
10mS
5000mS
Perf. Criteria A
Perf Criteria A
Perf. Criteria A
Perf. Criteria A
Perf. Criteria A
Perf. Criteria B
Perf. Criteria A
Perf. Criteria B
Perf. Criteria A
Perf. Criteria B
NOTES
(1)
(2)
2/22/2016
The “x” in the model number indicates the optional package type. “x” can either be “O” for Open Frame Type, “C” for Enclosed Type, “U” for UChassis Type, or “DN” for Din Rail Type.
Output Current: Convection Cooled 73ºC Ta
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
website: www.wallindustries.com • e-mail: [email protected]
Page 3 of 7
PSMAD40 SERIES
40 Watts
AC/DC Power Supplies
Single Output
Rev A
DERATING CURVES
Derating Curve vs. Ambient Temperature
5V, 7.5V, 9V 12S1V 15S1, 28V Models
Derating Curve vs. Ambient Temperature
12V, 15V, 24V, 36V, 48V, 53V Models
Derating Curve vs. Input Voltage
2/22/2016
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
website: www.wallindustries.com • e-mail: [email protected]
Page 4 of 7
PSMAD40 SERIES
40 Watts
AC/DC Power Supplies
Single Output
Rev A
EFFICIENCY GRAPHS
Efficiency vs. Output Load
PSMAD40-24S-U
Efficiency vs. Input Voltage
PSMAD40-24S-U
MECHANICAL DRAWINGS
O Type- Open Frame
2/22/2016
DN Type- Din Rail Type
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
website: www.wallindustries.com • e-mail: [email protected]
Page 5 of 7
PSMAD40 SERIES
40 Watts
AC/DC Power Supplies
Single Output
Rev A
C Type- Enclosed Type
1.
2.
3.
U Type- U Chassis Type
All dimensions in inch (mm)
Tolerance: x.xx±0.02 (x.x±0.5)
x.xxx±0.01 (x.xx±0.25)
M3x0.5 screw locked torque MAX 5Kgf.cm/0.49N.m
CONNECTORS
CON1-Input Connector
Pin 1
Pin 3
Line
Neutral
Mounting holes marked with
Mates with
must be connected to
JST housing: VHR-3N
JST crimp terminals: SVH-21T-P1.1 safety earth for CLASS I
application
2/22/2016
CON2-Output Connector
Pin 1, 2
Pin 3, 4
-Vout
+Vout
Mates with
JST housing: VHR-4N
JST crimp terminals: SVH-21T-P1.1
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
website: www.wallindustries.com • e-mail: [email protected]
Page 6 of 7
PSMAD40 SERIES
40 Watts
AC/DC Power Supplies
Single Output
Rev A
MODEL NUMBER SETUP
PSMAD
40
Series Name
Output Power
-
15
S
Output Voltage
Output Quantity
05: 5VDC
-
S: Single
075: 7.5VDC
09: 9VDC
E
□
Package Type
Protection Type
O: Open Type
No Suffix: CLASS I
U: U Chassis Type
B: CLASS II
C: Enclosed Type
12: 12VDC
DN: Din Rain Type
15: 15VDC
24: 24VDC
28: 28VDC
36: 36VDC
48: 48VDC
53: 53VDC
COMPANY INFORMATION
Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development
engineers will provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001-2008
certification is just one example of our commitment to producing a high quality, well-documented product for our customers.
Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely
with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide
ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss your
future projects.
Contact Wall Industries for further information:
Phone:
Toll Free:
Fax:
E-mail:
Web:
Address:
2/22/2016
(603)778-2300
(888)597-9255
(603)778-9797
[email protected]
www.wallindustries.com
37 Industrial Drive
Exeter, NH 03833
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
website: www.wallindustries.com • e-mail: [email protected]
Page 7 of 7