Component Risk Mitigation Checklist M SA Packaged Devices Counterfeit Risk Component Rating Flow Obsolescence Risk Rating Comments Plan Counterfeit Risk Level 1 A. Secure Chain – Completely under Micross control from OCM to delivery (full documentation) PL B. Authorized Chain – Purchased through OCM approved channel (full documentation) Level 2 Aged Chain – Purchased from previously approved OCM channel (limited documentation) Level 3 Questionable Chain – Customer directed purchase through gray market (OCM documentation available but suspect) Level 4 Unknown Chain – Customer directed purchase through gray market (documentation suspect) E Counterfeit Validation Flow Incoming documentation review Resistance to solvents – MIL-STD-883, TM 2015 Scanning acoustic microscopy Marking surface DPA evaluation Electrical performance validation Continuity test - ConTest-1K™ Temperature cycle, MIL-STD-883, TM 1010 Obsolescence Risk Electrical measurements R FO External visual inspection, MIL-STD-883, TM 2009 Constant acceleration, MIL-STD-883,TM 2001, Condition E Burn-in, MIL-STD-883, TM 1015 Fine and gross leak, MIL-STD-883, TM 1014 X-Ray inspection X-Ray Fluorescence (XRF) Destructive physical analysis, MIL-STD-883, TM 5009 Obsolescence Plan M Low – Early in product life cycle Preferred OCM EOL tracking Moderate – Product in full production, EOL tracking. Alternate OCM determination EOL tracking High – Late in product life cycle, EOL tracking Product continuation strategy Obsolete – Past EOL for product, replacement services May 2013 • Rev. 1.3 Micross Components • 7725 N. Orange Blossom Trail • Orlando, FL 32810 • 407.298.7100 • [email protected] • www.micross.com