DTEPU20 SERIES Up To 20 Watts AC/DC Desktop Power Supplies Single Outputs Rev B Type A: IEC-320-C14 Type B: IEC-320-C8 Type C: IEC-320-C6 Size: 4.11in x 1.65in x 1.22in Size: 3.90in x 1.65in x 1.22in Size: 3.90in x 1.65in x 1.22in OPTIONS • Output Connectors • Output Voltage • AC Inlet FEATURES • • • • • • • Class I for A & C Types; Class II for B Type RoHS and UL 94V-1 Compliant Energy Star 2.0, Efficiency Level VI Compliant Single Output Voltages Available from 5~50VDC Wide Input Voltage Range: 90~264VAC 100% Burn-In Tested 1 Year Warranty • Up to 20 Watts Output Power • Efficiency up to 87% • UL/cUL (UL60950-1: 2nd Edition) and TUV/GS (EN 609501:2nd Edition), FCC, CE, and CB Safety Approvals • IEC-320-C14, IEC-320-C8, and IEC-320-C6 AC Inlets Available • Optional Output Connectors Available APPLICATIONS DESCRIPTION • • • • • • The DTEPU20 series of AC/DC desktop power supplies provides up to 20 watts of continuous output power. This series consists of single output models with output voltages ranging from 5~50VDC and a wide operating input voltage range of 90~264VAC. All units are UL 94V-1, RoHS, and CEC/Energy Star level VI compliant and meet FCC Part-15 class B and CISPR-22 class B emission limits. The DTEPU20 series also meets new CE requirements and has UL/cUL (UL 60950-1: 2nd edition), TUV/GS (EN 60950-1: 2nd edition), FCC, CB, and CE safety approvals. The DTEPU20 series has three types of AC inlets available: IEC-320-C14 (Type A), IEC-320-C8 (Type B), and IEC-320-C6 (Type C). All units have been 100% burn-in tested. POS System AV Equipment Industrial PC Note PC Charger LED Lighting MODEL SELECTION TABLE Model Number(1) DTEPU20A-102 DTEPU20A-103 DTEPU20A-104 DTEPU20A-105 DTEPU20A-106 DTEPU20A-107 DTEPU20A-108 DTEPU20A-109 DTEPU20A-110 DTEPU20A-111 DTEPU20B-102 DTEPU20B-103 DTEPU20B-104 DTEPU20B-105 DTEPU20B-106 DTEPU20B-107 DTEPU20B-108 DTEPU20B-109 DTEPU20B-110 DTEPU20B-111 DTEPU20C-102 DTEPU20C-103 DTEPU20C-104 DTEPU20C-105 DTEPU20C-106 DTEPU20C-107 DTEPU20C-108 DTEPU20C-109 DTEPU20C-110 DTEPU20C-111 12/18/2015 Input Voltage Range Output Voltage 5~5.99VDC 6.5~8VDC 8~11VDC 11~13VDC 13~16VDC 90~264VAC 16~21VDC 21~27VDC 27~33VDC 33~40VDC 40~50VDC 5~5.99VDC 6.5~8VDC 8~11VDC 11~13VDC 13~16VDC 90~264VAC 16~21VDC 21~27VDC 27~33VDC 33~40VDC 40~50VDC 5~5.99VDC 6.5~8VDC 8~11VDC 11~13VDC 13~16VDC 90~264VAC 16~21VDC 21~27VDC 27~33VDC 33~40VDC 40~50VDC Output Current 2.50~3.00A 1.87~2.30A 1.81~2.50A 1.53~1.81A 1.25~1.53A 0.95~1.25A 0.74~0.95A 0.60~0.74A 0.50~0.60A 0.40~0.50A 2.50~3.00A 1.87~2.30A 1.81~2.50A 1.53~1.81A 1.25~1.53A 0.95~1.25A 0.74~0.95A 0.60~0.74A 0.50~0.60A 0.40~0.50A 2.50~3.00A 1.87~2.30A 1.81~2.50A 1.53~1.81A 1.25~1.53A 0.95~1.25A 0.74~0.95A 0.60~0.74A 0.50~0.60A 0.40~0.50A Ripple & Noise(6) 100mVp-p 100mVp-p 100mVp-p Total Regulation ±5% ±5% ±5% ±5% ±5% ±4% ±4% ±4% ±4% ±4% ±5% ±5% ±5% ±5% ±5% ±4% ±4% ±4% ±4% ±4% ±5% ±5% ±5% ±5% ±5% ±4% ±4% ±4% ±4% ±4% Output Power Efficiency 15W 81.4% 15W 81.4% 20W 85.5% 20W 85.5% 20W 85.5% 20W 85.5% 20W 86% 20W 86% 20W 87% 20W 87% 15W 81.4% 15W 81.4% 20W 85.5% 20W 85.5% 20W 85.5% 20W 85.5% 20W 86% 20W 86% 20W 87% 20W 87% 15W 81.4% 15W 81.4% 20W 85.5% 20W 85.5% 20W 85.5% 20W 85.5% 20W 86% 20W 86% 20W 87% 20W 87% Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 1 of 5 DTEPU20 SERIES Up To 20 Watts AC/DC Desktop Power Supplies Single Outputs Rev B SPECIFICATIONS All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. SPECIFICATION TEST CONDITIONS Min Typ Max Unit INPUT SPECIFICATIONS Safety Approvals Input Voltage Range Operate Voltage Range Input Voltage Range Input Frequency Low Line Input Current High Line Low Line Inrush Current High Line OUTPUT SPECIFICATIONS Output Voltage Line Regulation(4) Load Regulation(5) Output Power Output Current Ripple & Noise (20MHz BW)(6) Transient Response Recovery Time Start-Up Time Hold-Up Time(7) Temperature Coefficient No Load Power Consumption PROTECTION Short Circuit Protection 100 90 47 Io=Full Load, Vin=100VAC Io=Full Load, Vin=240VAC Io=Full Load, 25ºC, Cool Start, Vin=115VAC Io=Full Load, 25ºC, Cool Start, Vin=230VAC 40 81 Io=Full Load, Vin=100~120VAC Vin=230VAC, 10~90% Load Change at Condition 0.5 4 Rated Load and Nominal Line Full Load, Vin=100VAC Io=Full Load, Vin=100~240VAC Io=Full Load, Vin=100VAC Full Load, Vin=100~240VAC No Load, Vin=230VAC 240 264 63 0.5 0.3 50 87 10~95% RH Operating Humidity Non-Condensing Storage Humidity See Table 1 5 See Table See Table 100 4 3 70 ºC 85 ºC 0 95 % 95 % Free Air Convection UL94V-1 8 6 3000 5 1 2 Air Discharge, IEC61000-4-2 Contact Discharge, IEC61000-4-2 10~500Hz, 10min. 1cycle, 60min. each along X, Y, Z axes Line-Neutral Line-PE & Neutral-PE Derate linearly from 100% load at 40ºC to 50% load at 70ºC Operating Temperature at 25ºC, Calculated per MIL-HDBK-217F Isolation Resistance Leakage Current DTEPU20A, DTEPU20C All Outputs Test Voltage=500VDC Vin=240VAC/60Hz kV M G kV 100,000 Io=Full Load, Vin=230VAC Dielectric Withstanding Voltage mVp-p mS S mS %/ºC W 0 0 Efficiency % % -40 Cooling Flammability Derating MTBF GENERAL SPECIFICATIONS A Automatic Recovery Nil, but output protected to short circuit conditions Storage Temperature Surge Voltage A ±0.04 0.1 ENVIRONMENTAL SPECIFICATIONS Operating Temperature Derate linearly from 100% load at 40ºC to 50% load at 70ºC) Operating Altitude Vibration Hz 8 Over Current Protection Electrostatic Discharge VAC Hours See Table Primary to PE Primary to Secondary 2550 4242 50 VDC MΩ DTEPU20A, DTEPU20C DTEPU20B PHYSICAL SPECIFICATIONS Weight 0.75 0.25 mA Approx. 6oz (170g) 4.11in x 1.65in x 1.22in (104.4mm x 42mm x 31mm) 3.90in x 1.65in x 1.22in (99mm x 42mm x 31mm) DTEPU20A Dimensions (L x W x H) DTEPU20B, DTEPU20C SAFETY UL/c-UL (UL 60950-1:2nd Edition) TUV/GS (EN 60950-1:2nd Edition) Safety Approvals Protection Classes 12/18/2015 DTEPU20A, DTEPU20C DTEPU20B Class I Double Insulated, Class II Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 2 of 5 Rev B DTEPU20 SERIES Up To 20 Watts AC/DC Desktop Power Supplies Single Outputs NOTES (1) (2) (3) (4) (5) (6) (7) DTEPU20B-102~107 are required to use AWG#18/4FT output cable. DTEPU20B-108~111 are required to use AWG#20/4FT output cable. The electrical characteristics will be changed by modified output cable. Output can provide up to peak load when the power supply starts up. Staying in more than rated load continually is not allowed. Each output is checked to be within voltage accuracy in 60% rated load condition. Line regulation is defined by changing ±10% of input voltage from nominal line at rated load. Load regulation is defined by changing ±40% of measured output load from 60% rated load. Ripple & Noise is measured by using 20MHz bandwidth limited oscilloscope and terminated each output with a 0.47uF capacitor at rated load and nominal line. Hold up time is measured from the end of the last charging pulse to the time which the main output drops down to low limit of main output at rated load and nominal line. DERATING CURVES Input Voltage Derating Curve Temperature Derating Curve 12/18/2015 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 3 of 5 Rev B DTEPU20 SERIES Up To 20 Watts AC/DC Desktop Power Supplies Single Outputs MECHANICAL DRAWINGS Type A Type B 12/18/2015 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 4 of 5 Rev B DTEPU20 SERIES Up To 20 Watts AC/DC Desktop Power Supplies Single Outputs Type C COMPANY INFORMATION Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development engineers will provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001-2008 certification is just one example of our commitment to producing a high quality, well-documented product for our customers. Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss your future projects. Contact Wall Industries for further information: Phone: Toll Free: Fax: E-mail: Web: Address: 12/18/2015 (603)778-2300 (888)597-9255 (603)778-9797 [email protected] www.wallindustries.com 37 Industrial Drive Exeter, NH 03833 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 5 of 5