Download Data Sheet

DTIPU61A SERIES
60 Watts
AC/DC Industrial Desktop Power Supplies
Single Output
Rev B
Size: 4.65in x 1.85in x 1.19in (118mm x 47mm x 30.3mm)
FEATURES
•
•
•
•
•
APPLICATIONS
•
•
•
•
•
•
•
•
•
Wide Operating Voltage 90 to 264VAC, 47 to 63 Hz
IEC-320-C14 Input Inlet
Optional Output Connectors Available
Single Output
Class I System
Over Load and Short Circuit Protection
Cooling by Free Air Convection
Meets Efficiency Level VI
UL/c-UL(UL 60950-1:2nd Edition), TUV/GS
(EN 60950-1: 2nd Edition) Safety Approvals
DESCRIPTION
POS System/AV Equipment
Industrial PC
Note PC
Charger
LED Lighting
The DTIPU61A series of AC/DC industrial desktop power supplies offers 60 watts of output power
in a 4.65” x 1.85” x 1.19” package. This series has a wide operating voltage range of 90~264VAC
and consists of single output models ranging from 12V to 48V. The DTIPU61A has an IEC-320-C14
input inlet and optional output connectors are available. This series meets efficiency level VI, has
over load and short circuit protection, and has UL/c-UL(UL 60950-1:2nd Edition), TUV/GS (EN
60950-1: 2nd Edition) safety approvals.
MODEL SELECTION TABLE
Model Number
DTIPU61A-105
DTIPU61A-106
DTIPU61A-107
DTIPU61A-108
DTIPU61A-109
DTIPU61A-110
DTIPU61A-111
3/7/2016
Input Voltage
Range
Output
Voltage
90~264VAC
12-13VDC
13-16VDC
16-21VDC
21-27VDC
27-33VDC
33-40VDC
40-48VDC
Output Current
No Load
Ripple & Noise
Input Current
Min Load Max Load
4.61A
5.00A
3.75A
4.61A
2.85A
3.75A
2.22A
2.85A
100mVp-p
0.5W
1.81A
2.22A
1.50A
1.81A
1.25A
1.50A
Output
Power
Efficiency
60W
87% min.
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
website: www.wallindustries.com • e-mail: [email protected]
Page 1 of 4
Rev B
DTIPU61A SERIES
60 Watts
AC/DC Industrial Desktop Power Supplies
Single Output
SPECIFICATIONS
All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted.
We reserve the right to change specifications based on technological advances.
SPECIFICATION
TEST CONDITIONS
Min
Typ
Max
Unit
INPUT SPECIFICATIONS
Safety Approval & Specification in Label
Operate Range
Input Voltage Range
Input Frequency
Input Current
High Line Input Inrush Current
Safety Ground Leakage Current
OUTPUT SPECIFICATIONS
Output Voltage
Line Regulation(3)
Load Regulation(4)
Output Power
Output Current
Ripple & Noise (20MHz bandwidth)(5)
Transient Response Recovery Time
Start-Up Time
Hold-Up Time(6)
Temperature Coefficient
PROTECTION
Short Circuit Protection
Over Load Protection
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature
Storage Temperature
Operating Humidity
Storage Humidity
Operating Altitude (Elevation)
Vibration
Cooling
Flammability Rating
MTBF
GENERAL SPECIFICATIONS
Efficiency
Dielectric Withstanding Voltage
100
90
47
240
264
63
1.45
1.45
105
0.75
Low Line
Full Load, Vin=100VAC
High Line
Full Load, Vin=240VAC
Full Load, 25ºC, Cool start, Vin=240VAC
Vin=240VAC, 60Hz
VAC
Hz
A
A
mA
See Table
Full Load, Vin=100~120VAC
Vin=230VAC, 10~90% Load Change at Condition
0.5
3
1
5
60
See Table
100
4
3
Full Load, Vin=110VAC
Full Load, Vin=100~240VAC
Full Load, Vin=100VAC
Full Load, Vin=100~240VAC
%
%
W
mVp-p
mS
S
±0.04
Automatic Recovery
150
110
-20
-40
0
0
10~95% RH
Non-Condensing
Full Load, Vin=230VAC
Primary to Secondary
Primary to PE
%
70
85
95
95
3000
5
Free Air Convection
UL94V-1
All conditions
10~500Hz, 10min./1 cycle, 60min. each along X, Y, Z axes
Operating Temperature at 25ºC, calculated per MIL-HDBK-217F
%/ºC
ºC
ºC
% RH
% RH
M
G
100,000
Hours
87
%
4242
2645
PHYSICAL SPECIFICATIONS
Weight
VDC
11.99oz (340g)
4.65in x 1.85in x 1.19in
(118mm x 47mm x 30.3mm)
Dimensions (L x W x H)
SAFETY & EMC CHARACTERISTICS
UL/c-UL(UL 60950-1: 2nd Edition)
TUV/GS (EN 60950-1: 2nd Edition)
EN55022 (CISPR22)
Safety
EMC Emission
Electro Static Discharge
Surge Voltage
Class B
Air Discharge, IEC61000-4-2
Contact Discharge, IEC61000-4-2
Line-Neutral
Line-PE & Neutral-PE
Protection Class
8
6
1
2
kV
kV
Class I
NOTES
(1)
(2)
(3)
(4)
(5)
(6)
(7)
3/7/2016
Output can provide up to peak load when the power supply starts up. Staying in more than rated load continually is not allowed.
At factory, in 60% rated load condition, each output is checked to be within voltage accuracy.
Line regulation is defined by changing ±10% of input voltage from nominal line at rated load.
Load regulation is defined by changing ±40% of measured output load from 60% rated load.
Ripple & Noise is measured by using 20MHz bandwidth limited oscilloscope and terminated each output with a 0.47uF capacitor at rated load and
nominal line.
Hold up time is measured from the end of the last charging pulse to the time which the main output drops down to low limit of main output at rated
load and nominal line.
Efficiency is measured at rated load and nominal line.
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
website: www.wallindustries.com • e-mail: [email protected]
Page 2 of 4
Rev B
DTIPU61A SERIES
60 Watts
AC/DC Industrial Desktop Power Supplies
Single Output
DERATING CURVES
Input Voltage Derating Curve
Temperature Derating Curve
MECHANICAL DRAWINGS
Notes:
Output Cables:
DTIPU61A-105~107 are required to use AWG#16/4FT output cable
DTIPU61A-108~109 are required to use AWG#18/4FT output cable
DTIPU61A-110~111 are required to use AWG#20/4FT output cable
Optional output cables are available. Please call factory for details.
3/7/2016
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
website: www.wallindustries.com • e-mail: [email protected]
Page 3 of 4
Rev B
DTIPU61A SERIES
60 Watts
AC/DC Industrial Desktop Power Supplies
Single Output
COMPANY INFORMATION
Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development
engineers will provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001-2008
certification is just one example of our commitment to producing a high quality, well-documented product for our customers.
Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely
with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide
ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss your
future projects.
Contact Wall Industries for further information:
Phone:
Toll Free:
Fax:
E-mail:
Web:
Address:
3/7/2016
(603)778-2300
(888)597-9255
(603)778-9797
[email protected]
www.wallindustries.com
37 Industrial Drive
Exeter, NH 03833
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
website: www.wallindustries.com • e-mail: [email protected]
Page 4 of 4